You are a genius! Tried for hours to get my new sprayer work. Read the manual, browsed tons of articles and videos, and then saw your video and had it working in less than 5 minutes. 4 minutes of that was drying myself off 😂. Thanks for the contribution to helping mankind!
I have a different brand of battery-powered backpack sprayer and had the same problem. I followed your advice and now its working again. However, I went so far as to disassemble my sprayer to access the inlet and outlet ports of the actual pump. I then used a Waterpik to force water into the pump. After reconnecting everything, the sprayer was working again. Before I store the sprayer away for the winter, I will make sure to leave some water in the pump to keep it “lubricated”. THANK YOU
Unbelievable. Imagine my disappointment when my brand new Stihl battery powered sprayer would not pump! After reading the instructions cover to cover, I went on my trusty RUclips and found your video. Though I didn’t quite backfeed the pump like you did, it was basically the same thing filling the sprayer tube and then putting my air nozzle on it and pressurizing it. Easy as pie and took right off. Thanks man!
great video! I did this 2 years ago and it worked great. I put the sprayer away for 2 years then pulled it out to use it this year. Nothing. I tried the same method again. Nothing. So, I gave up and left it sit. I didn't drain the water out. The neighbor showed up today and I showed him the sprayer that was dead. I turned it on and pulled the trigger, and it WORKED!!! Leaving it sit for a few days must have primed the pump.
Using Ryobi 4 gallon 4V chemical spray backpack, everything was put together properly, battery fully charged, etc. Tool wouldn't spray. I returned the tool and purchased a new one: same product. Of course, same issue; sprayer wouldn't spray!!! Called Ryobi tech support: 45 minute on hold wait. Used their chat, no tech help whatsoever. I saw your video. You said, "Prime the pump!" I used a hose as you demonstrated, and voila, the damn tool works fine now. THANK YOU VERY MUCH for helping me figure out the issue!
Thank you!!! Brand new out of the box Ryobi 4gal 18v backpack sprayer. I talked to two Ryobi customer service technical experts following their step by step troubleshooting instructions, but no luck. Taking something like this back simply isn't the easiest thing in the world due to where I live. This video was spot on!! Worked like it should after this!!
I bought a 24 Volt backpack sprayer two years ago. I used it once, cleaned it out, and put it away. I did not use it for one season (completely dry in the tank). In April 2021 I tried using it again, and it did not pump the solution out. I called the company and I watched youtube videos. Nothing! I decided the unit was shot!!!!! I then saw a video on youtube. The guy said just bang the unit on the ground (Not hard, and I had about 1 gal. of water in it). I did and it started to work. Try that before you throw it out........ And also, keep about one qt. of clean water in the tank when you put it away. I don't know if this is recommended, but it will keep the pump ready to go. :)
Thanks for the video! I did have to do one additional step to get mine to work out of the box, which was to actually turn the pump on while I was forcing water into the system as you describe. Was my last resort, but it worked!
Thankyou so so much for posting this video! I brought this cheap Shogun 16V and couldn’t figure out how to get it going and it had ZERO instructions in the box or anywhere on line and your tip worked instantly! Thankyou so much!
You definitely told me the problem however the garden hose didn't work for me. I had to take the old approach used to siphon gas. Fortunately my unit was new so I filled it with tap water. It's working now. Thanks for your tips
You are my hero!!! I was so frustrated with my brand new sprayer that would not work. Thank you for taking the time to create this video, as this method worked like a charm!
I appreciate your help …have a new sprayer that’s been sitting for about a year …went to use it and, no water flow…followed your advice and had to suck some water through the tube and it works grear. Thanks !
Was really happy when I ran across your video because I was having the same problem with a sprayer that I just brought home from Home Depot. Unfortunately you solution did not work for me - forced water back through the hose until the sprayer was full. Turned on the pump and no output from the sprayer hose. Will do a little more research and then back to Home Depot. Nice to see that your efforts helped so many.
I can't thank you enough. I thought it was a bad unit so I bought a second one. Lo and behold it didn't work either. I would hazard a guess that you weren't the engineer or procedure writer for this project. You would think that this Golden Nugget of information would be something that they would want to include in the owner's manual? Thanks again!
Wow!! Worked excellent! I was just getting ready to take my sprayer back to Rural King when I found this video. Be careful when you unscrew the hose because there will be a lot of pressure there
Very simple fix for anyone interested. Turn the sprayer on and while holding the trigger down shake the hose back and forth quickly and it will prime in seconds.
Great video. I had to prime my brand new YT25E sprayer. I used your method by removing the spray trigger assembly and then pouring a small amount of water down the supply tube. Managed to do this indoors, without getting wet.
Took apart bottom carefully before doing anything with it. Gently tightened hose with regular screw driver. Gently checked all screws for tightness. They were fine. Lubed the o ring on bottom of tank inside or between tank and pump. Just enough. Then very carefully put all back together. Filled with 1 gallon water. Left water in over night to check for leaks while battery charged fully over night. Made sure in off position. Loaded battery on and turned to on position. Pointed hose end in tank and primed pump which worked perfectly out of box. Double checked for leaks and found none. Ready to go for spraying.
Wow! I had my backpack sprayer for over 3 years and just now experienced this issue. I followed your advice and in less than 5 minutes it's working again. Thanks! Saved me a couple hundred $$$.
I tried a few other methods they didn’t work. This is the only one that worked for me. Thank you. I was about to go get a new backpack😅. Also, I noticed if you do bursts of water it helps push the water in.
Thanks man! - I was getting angry and about to send my new sprayer back. I watched your video and my new sprayer works now. Why don’t they put this in the handbooks? 😏
meant stain and odor eliminator i have the regular sprayer but its pain carrying all around my apt so thats why i wanted one and thnx for your video caring enough to help us out
I have the Walmart brand Chapin. You have to make sure to filter the fluid that you pour in especially if you are mixing powders. The filters get clogged easily. Also flush the fluids out and leave a little water inside the tank. Other than that I have not had any problems. The main issue I have with them is that the battery is exposed at the bottom. They should have done something to protect it.
I had no problem filled the tank half full of water, charged the battery first, stuck the wand in the submerged tank depressed the trigger and primed the pump no problem sprayer worked
Hi I have the Ryobi One+ Backpack Sprayer, so I used my handheld shower on stream into the hose, and then I took the short hose inside the container out of the water, and that worked .. Thank you
brand new battery powered pump from cardinal... would not flow at all.. the hose was way too small to hook the hose up to it, but what ended up working was turning the pump on with water and sucking on the end of the hose.. broke the pump free and been working since. hopefully this is a one time thing though and i dont have to try and suck some herbicide through the pump
I see you have a new handle on backpack sprayer in the newer videos. Do you have a video of what handle you replaced it with? I have a Chapin backpack sprayer and the hose in my opinion is too short. I would like to replace it and also replace the handle. Thanks
So what I did to prime it after trying their way for 30 minutes with no luck was to turn it on and stick the wand into the end of my shop vac and make it air tight and I let the shopvac suck the water into the pump and line. Worked really quickly. 😎🎼🎤🎺
I have a $100 sprayer that never had this issue. After a year, I wanted a nicer one and bought a $300 sprayer. It won’t spray. I don’t have a yard with a hose. I expect it to work out of the box. Ridiculous. Thanks for sharing though.
I couldn't do that, I already had my weed killer in there lol. Squeezing the trigger then flipping the power on worked for me! Greetings from Colorado.
I tried this, you're right you'll get wet. My sprayer still didn't work. As a last resort, I secured red cap and turned unit upside down and it primed immediately.
Chapin has a new pump now I had many problems with unit sent it back 3 times and each time it only last a few uses. now they inform me that they have a newly designed pump and will be sending me a new unit at the end of july 2020 or first of July....
Thanks! Just happened to me with an out of the box Makita 18V 15L cordless sprayer. What the F***? I will see what the dealer has to say first!- asked for replacement
here is a HEADS UP.......... I have that sprayer. after using it a while it would keep shutting down.....no pressure.... Unthread the wand....run the pump. Then remove the filter screen in the handle. It gets full of crap, especially all that humic.... wala.......perfect again.
I have a Kobalt 4 gallon sprayer that has suddenly stopped priming. I tried to force water into the pump like you did. For some reason it doesn’t want to fill in this direction. I have a hose with a jet nozzle that fits right into the sprayer tube, but no water is appearing in the tank. I cannot see anywhere else where the water is going, so it’s as if the tube is preventing flow from the hose. Has anyone else had this issue with the Kobalt sprayer?
I have a Kobalt sprayer that suddenly will not prime. I tried forcing water through the tube and it does not seem to be filling the tank. I have a hose nozzle with a jet setting that fits almost perfectly into the backpack tube. But no water is coming out anywhere or into the tank. Has anyone else tried this method with a Kobalt backpack sprayer?
Thanks for your video. I’ve had my Dewalt backpack sprayer for four months. Used it five times just fine. Filled it three times. Refilled it this morning with my Chemical got down about a quarter tank left and after the released it pisses out real slow. so it builds up pressure sprays really good for two seconds and then peters out anybody have a clue.
The backpack sprayers are complete garbage.. I have gone through three of them in the last 5 months and all of them leak through the bottom of the pump on to the battery and on to whoever is wearing the sprayer.. 100% garbage
Same here, got 2 Kimo & 1 Ryobi all die within two months at most. We are so technological advance that we couldn't even make a simple sprayer that last.
You should hold the hose in here running wow that’s not confusing. I stick the hose in it. I’m hoping your video helps me get this thing working I appreciate you, but that was a trip.
You are a genius! Tried for hours to get my new sprayer work. Read the manual, browsed tons of articles and videos, and then saw your video and had it working in less than 5 minutes. 4 minutes of that was drying myself off 😂. Thanks for the contribution to helping mankind!
I have a different brand of battery-powered backpack sprayer and had the same problem. I followed your advice and now its working again. However, I went so far as to disassemble my sprayer to access the inlet and outlet ports of the actual pump. I then used a Waterpik to force water into the pump. After reconnecting everything, the sprayer was working again. Before I store the sprayer away for the winter, I will make sure to leave some water in the pump to keep it “lubricated”. THANK YOU
Unbelievable. Imagine my disappointment when my brand new Stihl battery powered sprayer would not pump! After reading the instructions cover to cover, I went on my trusty RUclips and found your video.
Though I didn’t quite backfeed the pump like you did, it was basically the same thing filling the sprayer tube and then putting my air nozzle on it and pressurizing it.
Easy as pie and took right off.
Thanks man!
great video! I did this 2 years ago and it worked great. I put the sprayer away for 2 years then pulled it out to use it this year. Nothing. I tried the same method again. Nothing. So, I gave up and left it sit. I didn't drain the water out.
The neighbor showed up today and I showed him the sprayer that was dead. I turned it on and pulled the trigger, and it WORKED!!! Leaving it sit for a few days must have primed the pump.
Using Ryobi 4 gallon 4V chemical spray backpack, everything was put together properly, battery fully charged, etc. Tool wouldn't spray. I returned the tool and purchased a new one: same product. Of course, same issue; sprayer wouldn't spray!!! Called Ryobi tech support: 45 minute on hold wait. Used their chat, no tech help whatsoever. I saw your video. You said, "Prime the pump!" I used a hose as you demonstrated, and voila, the damn tool works fine now. THANK YOU VERY MUCH for helping me figure out the issue!
Thank you!!!
It worked!! My husband is so happy that he doesn’t have to purchase a third Kobalt sprayer! Thank you again.
Thank you!!! Brand new out of the box Ryobi 4gal 18v backpack sprayer. I talked to two Ryobi customer service technical experts following their step by step troubleshooting instructions, but no luck. Taking something like this back simply isn't the easiest thing in the world due to where I live. This video was spot on!! Worked like it should after this!!
I bought a 24 Volt backpack sprayer two years ago. I used it once, cleaned it out, and put it away. I did not use it for one season (completely dry in the tank). In April 2021 I tried using it again, and it did not pump the solution out. I called the company and I watched youtube videos. Nothing! I decided the unit was shot!!!!! I then saw a video on youtube. The guy said just bang the unit on the ground (Not hard, and I had about 1 gal. of water in it). I did and it started to work. Try that before you throw it out........ And also, keep about one qt. of clean water in the tank when you put it away. I don't know if this is recommended, but it will keep the pump ready to go. :)
You’re a legend, thank you! I had no idea why my brand new battery powered backpack sprayer wasn’t spraying any water. This fixed it for me.
Thanks for the video!
I did have to do one additional step to get mine to work out of the box, which was to actually turn the pump on while I was forcing water into the system as you describe. Was my last resort, but it worked!
Legend. New Solo Sprayer stopped working after 15minutes; this solved it for me. Thank you. 🎉
Thankyou so so much for posting this video! I brought this cheap Shogun 16V and couldn’t figure out how to get it going and it had ZERO instructions in the box or anywhere on line and your tip worked instantly! Thankyou so much!
Like all the others, I was ready to send it back - your video saved my weekend, Thank you very much for posting.
You definitely told me the problem however the garden hose didn't work for me. I had to take the old approach used to siphon gas. Fortunately my unit was new so I filled it with tap water. It's working now. Thanks for your tips
You are my hero!!! I was so frustrated with my brand new sprayer that would not work. Thank you for taking the time to create this video, as this method worked like a charm!
I appreciate your help …have a new sprayer that’s been sitting for about a year …went to use it and, no water flow…followed your advice and had to suck some water through the tube and it works grear. Thanks !
Was really happy when I ran across your video because I was having the same problem with a sprayer that I just brought home from Home Depot. Unfortunately you solution did not work for me - forced water back through the hose until the sprayer was full. Turned on the pump and no output from the sprayer hose. Will do a little more research and then back to Home Depot. Nice to see that your efforts helped so many.
I can't thank you enough. I thought it was a bad unit so I bought a second one. Lo and behold it didn't work either. I would hazard a guess that you weren't the engineer or procedure writer for this project. You would think that this Golden Nugget of information would be something that they would want to include in the owner's manual? Thanks again!
It worked for my new greenworks 80v. I was about to send it back to amazon, saved me the hassle. Thank you.
Wow!! Worked excellent! I was just getting ready to take my sprayer back to Rural King when I found this video. Be careful when you unscrew the hose because there will be a lot of pressure there
Thank you so much!!! I thought it was complete junk and was packing it to send it back. You saved the day!!!
Very simple fix for anyone interested. Turn the sprayer on and while holding the trigger down shake the hose back and forth quickly and it will prime in seconds.
@@PushaDee I love shaking my hose back and forth quickly… usually does the trick
Dude you are the KING of the Bosses. I got a different name brand and it worked I appreciate it.
Great video. I had to prime my brand new YT25E sprayer. I used your method by removing the spray trigger assembly and then pouring a small amount of water down the supply tube. Managed to do this indoors, without getting wet.
Took apart bottom carefully before doing anything with it. Gently tightened hose with regular screw driver. Gently checked all screws for tightness. They were fine. Lubed the o ring on bottom of tank inside or between tank and pump. Just enough. Then very carefully put all back together. Filled with 1 gallon water. Left water in over night to check for leaks while battery charged fully over night. Made sure in off position. Loaded battery on and turned to on position. Pointed hose end in tank and primed pump which worked perfectly out of box. Double checked for leaks and found none. Ready to go for spraying.
Wow! I had my backpack sprayer for over 3 years and just now experienced this issue. I followed your advice and in less than 5 minutes it's working again. Thanks! Saved me a couple hundred $$$.
I tried a few other methods they didn’t work. This is the only one that worked for me. Thank you. I was about to go get a new backpack😅. Also, I noticed if you do bursts of water it helps push the water in.
Thanks man! - I was getting angry and about to send my new sprayer back. I watched your video and my new sprayer works now. Why don’t they put this in the handbooks? 😏
Thank you so much for this. I had every problem you had and I tried this and it worked! I appreciate you posting this!!!!
Saved my sprayer just a few hours ago. Thank you so much for posting this.
Forcing water backwards into the sprayer did work right the way. Thank you.
Lmao at 1:49 😂😂😂😂
“I won’t go there”!!.. 😅
Thanks your advice worked was going to send it back but saw your post tried it and worked straight away thank you.
meant stain and odor eliminator i have the regular sprayer but its pain carrying all around my apt so thats why i wanted one and thnx for your video caring enough to help us out
First Aussie 😁, Great advice, Lawn there looks great .Thanks for sharing.😁👍👍
I have the Walmart brand Chapin. You have to make sure to filter the fluid that you pour in especially if you are mixing powders. The filters get clogged easily. Also flush the fluids out and leave a little water inside the tank. Other than that I have not had any problems.
The main issue I have with them is that the battery is exposed at the bottom. They should have done something to protect it.
Got my AEG spray pump primed. I left it running for 5 mins and rocked it back and forth. But thanks for the video.
Bro, I had a Hart that was doing the same thing. I tried everything, and still no spray. I did what you suggested, and BAM... It did the trick.
Worked for our brand new ryobi today! Thanks 🎉
That fixed mine thanks a lot. Nice lawn brother!
Thank you so much, my kobalt sprayer stopped working and now it works better than when it was brand new lmao
LIFE SAVER!!!!
It worked!!!..
Still laughing at 1:42 , that was hilarious!!…
very good video your lawn is BEAUTIFUL
I had no problem filled the tank half full of water, charged the battery first, stuck the wand in the submerged tank depressed the trigger and primed the pump no problem sprayer worked
That worked! You are my hero!
I got to give this a try. I had 2 unsuccessful attempts at spray and pray.
Hi I have the Ryobi One+ Backpack Sprayer, so I used my handheld shower on stream into the hose, and then I took the short hose inside the container out of the water, and that worked .. Thank you
brand new battery powered pump from cardinal... would not flow at all.. the hose was way too small to hook the hose up to it, but what ended up working was turning the pump on with water and sucking on the end of the hose.. broke the pump free and been working since. hopefully this is a one time thing though and i dont have to try and suck some herbicide through the pump
Damn great video straight to the point! Very informative and thank you!
My flo-master pump less can’t form a decent spray… might try this back flush to get any gunk out 👍
Worked great with an AEG.
Thanks.
I have the same sprayer and i am having the sane problem. I will give this trick a try and follow up with you!
Let me know how it goes!
How did it go
all you need is a Schrader valve, quarter inch fill it up with an air compressor and it will spray better than new and turbo charged
I see you have a new handle on backpack sprayer in the newer videos. Do you have a video of what handle you replaced it with? I have a Chapin backpack sprayer and the hose in my opinion is too short. I would like to replace it and also replace the handle. Thanks
So what I did to prime it after trying their way for 30 minutes with no luck was to turn it on and stick the wand into the end of my shop vac and make it air tight and I let the shopvac suck the water into the pump and line. Worked really quickly. 😎🎼🎤🎺
It worked! Thank you.
I have a $100 sprayer that never had this issue. After a year, I wanted a nicer one and bought a $300 sprayer. It won’t spray. I don’t have a yard with a hose. I expect it to work out of the box. Ridiculous. Thanks for sharing though.
Gonna try this .excellent. Thank you
It works for me, thank you!
This helped so much thank you!
Thank you for the advice. I'll try to do the same.
This worked for mine thanx dude.
Awesome glad I could help!
Another option is to unscrewed the wand, put the hose into the filled tank and turn it on It primed itself.
Prior to you doing the garden hose did you hear pump trying to pump or was it silent?
Not sure if it helps but sometimes after I shake the sprayer the bottom draw inside the pump flips up.
I couldn't do that, I already had my weed killer in there lol. Squeezing the trigger then flipping the power on worked for me! Greetings from Colorado.
That’s where I’m at I’m going to try your way
@@michaelhlavaty7695 It works trust me. Squeeze, turn it on and when it starts to spit let go of the trigger.
Meanwhile the guys with the hand pump spray tanks are finished and watching football :)
😂😂 fair enough! This sprayer isn’t recommended by me! I do recommend the My4Sons battery sprayer though, it’s money!!
@@TheLawnWhisperer 😁👍
Thank you. Reviewing for purchase of 1st.
I tried this, you're right you'll get wet. My sprayer still didn't work. As a last resort, I secured red cap and turned unit upside down and it primed immediately.
It worked. Thanks!!
Chapin has a new pump now I had many problems with unit sent it back 3 times and each time it only last a few uses. now they inform me that they have a newly designed pump and will be sending me a new unit at the end of july 2020 or first of July....
Very helpful. I feel stupid not thinking of it, but thanks ha..
Thanks! Just happened to me with an out of the box Makita 18V 15L cordless sprayer. What the F***? I will see what the dealer has to say first!- asked for replacement
here is a HEADS UP..........
I have that sprayer. after using it a while it would keep shutting down.....no pressure....
Unthread the wand....run the pump. Then remove the filter screen in the handle. It gets full of crap, especially all that humic....
wala.......perfect again.
I wanted to thank you very much for posting this video! Saved the day for me!
Thank you! You saved my life! Greetings from Serbia!
I have the same sprayer with a fully charged battery but it won't start for nothing ,what u guys think?
I'm not sure if it was the hose hook up or sucking water from the tank, but who cares, I got it working😅
Steer clear just came in the house to try and figure out a better one to buy I take care of my equipment second one in two years WTF
I have a Kobalt 4 gallon sprayer that has suddenly stopped priming. I tried to force water into the pump like you did. For some reason it doesn’t want to fill in this direction. I have a hose with a jet nozzle that fits right into the sprayer tube, but no water is appearing in the tank. I cannot see anywhere else where the water is going, so it’s as if the tube is preventing flow from the hose. Has anyone else had this issue with the Kobalt sprayer?
Mine just has low pressure.. it use to shoot super strong and now it’s weak.
What’s my problem?
I think you may want to consult with a doctor…
I got a seesa..replaced the pump..now it blows bubbled
GREAT INFO/VIDEO!
********* release pressure by disconnecting hose that's attached to backpack and reconnecting the hose******* no need to make a mess.
I have a Kobalt sprayer that suddenly will not prime. I tried forcing water through the tube and it does not seem to be filling the tank. I have a hose nozzle with a jet setting that fits almost perfectly into the backpack tube. But no water is coming out anywhere or into the tank. Has anyone else tried this method with a Kobalt backpack sprayer?
Thanks for your video. I’ve had my Dewalt backpack sprayer for four months. Used it five times just fine. Filled it three times. Refilled it this morning with my Chemical got down about a quarter tank left and after the released it pisses out real slow. so it builds up pressure sprays really good for two seconds and then peters out anybody have a clue.
It turns out it was the red filter. It had smegma all over it. not to sell rinse out materials after use.
thats what she said
haha
your welcome
stay safe
Why must we all come to RUclips to look for answers that should come with the sprayer? My new HD4050 new out of the box and battery will not charge.
Disconnect the hose from the wand and suck on the hose. 2 sec
@@vhensley57 getting the job done with only 2 seconds of sucking is a weird flex but impressive nonetheless
😂😂
The backpack sprayers are complete garbage.. I have gone through three of them in the last 5 months and all of them leak through the bottom of the pump on to the battery and on to whoever is wearing the sprayer.. 100% garbage
I'm on the search for a better one
Same here, got 2 Kimo & 1 Ryobi all die within two months at most. We are so technological advance that we couldn't even make a simple sprayer that last.
@@TheLawnWhisperer I got the Hart backpack sprayer and it works great. On my 3rd year with it.
@@TheLawnWhisperer I got the Hart backpack sprayer and it works great. On my 3rd year with it.
You should hold the hose in here running wow that’s not confusing. I stick the hose in it. I’m hoping your video helps me get this thing working I appreciate you, but that was a trip.
No punctuation is confusing.
@@TheLawnWhisperer lol