Hey Tatro -- great video! One question, though ... If the bearing rollers are 3 under and the crank pin is 6 over, shouldn't the measurements cancel each other out (-3 x 2 + 6=0)? So, wouldn't you then hone 9 tenths over standard (1.6250) rather than 1.2 thou over? What am I missing here?
your assuming that the customers tell me anything. most of the time if you don't install the motor yourself you don't get any feedback. that is acores if you didn't do something wrong, then you really will hear about it. tatro
Авто/Мото
![Young Nudy - John Wayne (feat. Metro Boomin) [Official Video]](http://i.ytimg.com/vi/NY8HnYYo2fo/mqdefault.jpg)
thanks for the channell so good to be able to sit back and watch a rebuild on a cold nigght in Newfoundland
Tatro - thanks for taking the time to make videos - these really do help people
Life is good. We have a new President. I have the day off. Tatro has a new video.
how is that good for me? i had to work and missed all the trump stuff.
tatro
Doing great cam operator for a first time, only have to watch your first one to figure it out for the most part thanks for posting these vids Tatro
that is what the videos are for.
tatro
Not that good. If he would remember to look with the camera and not his own eyes.
Good to see ya again! Thank You
nice video. working on my '94 now thanks
Great movie it's possible to learn some 👍
How did you get your start in working on bikes? I'm 20 and a diesel mechanic. Wanting to get into stuff like this.
grew up in the shop. just start doing it and you will see if you like it.
tatro
Tatro, are all the EVO crankshafts one piece? I have a 95, just wondering.
only the junk ones made after 1989.
tatro
can you setup 5 piece cranks for evo's?
go watch the 98ci stroker shovel motor build, same thing. basically all of the old harley cranks are built the same.
tatro
Hey Tatro -- great video! One question, though ... If the bearing rollers are 3 under and the crank pin is 6 over, shouldn't the measurements cancel each other out (-3 x 2 + 6=0)? So, wouldn't you then hone 9 tenths over standard (1.6250) rather than 1.2 thou over? What am I missing here?
Need to add running clearance as well, that's why they are honed oversize.
@@glenndavis2762 I thought 0.0009 was the running clearance.
let me know how it runs after it's built
your assuming that the customers tell me anything. most of the time if you don't install the motor yourself you don't get any feedback. that is acores if you didn't do something wrong, then you really will hear about it.
tatro
Camera man better keep his day job.
Zoom out !
To much zoom. Can't see very good.