I did this to my Camry today and oh boy!! As a car guy this is a huge difference if you want the car to sound way meaner it will when I instal this I do recommend a professional or someone with a lot of tools and knowledge this was a fun install and it makes the Camry way more fun!!!
@@corymoon1445 I followed the k&n intake video on RUclips I did hook up the evap hose to the back of the intake (on the metal pipe) and moved that sensor (i honestly can’t remember what it was) I think it was a mass airflow sensor don’t quote me but I mainly did the modification because I wanted more sound without changing up my exhaust any since the Camry already has nice engine sound this intake wakes it up and makes it a way more sporty feeling of a car… if I do ever sell the car I don’t have to weld up the old exhaust no nasty hack saw cuts on the exhaust no shotty welds just work from an honest fella 😂(all bolt on stuff I kept my old intake just incase it didn’t work out but within a month it felt really dialed in) can easily be reverted back to stock if needed.
@@KNfiltersso they can snow people like your ads? Without more fuel no wsy to.make more power it is physics. To gain power you need.more air and fuel like a turbo or supercharger does. With out remapping ecu for more fuel you lean out mixture with just more air, and as most modern fuel injected cars are already lean to pass emissions more air alone is no hp gain and could lean engine to.point of damaging engine.
Just added this to my 2014 Camry I didn’t notice too much in terms of power when driving, but on the highway getting up to higher speeds was more of a breeze. Is the growl supposed to be very loud? I found it to be very loud inside the vehicle when driving.
Only thing I’d worry about, is driving in the rain. Not to stress it, but that’s it really. Noise is good, as long as it’s not Rattling, or sounds likes it’s hydro locking, your good.
@@aziahcorbett6196 yes. Especially if your a dual exhaust, it’ll sound better, if it’s a single exhaust I’d do nuff and res delete for a louder tone, if you want a deep low and not as loud do muffler delete. But if you have dual exhaust do just a muffler delete.
@@aziahcorbett6196 and as far an intake, I don’t believe in them really 😂 unless it’s a cold air intake, but it’s more for show otherwise lol. I’d spend that 350$ on something better, tint, put it toward wheels coil overs lol, I’m saving for coils right now cam.
All K&N air intake systems are designed to work with factory ECU settings and should work out of the box. If you encounter any issues, please contact our product specialists 800-858-3333 or tech@knfilters.com for assistance.
Like make other companies, we are seeing an increased demand for products and delays in supply chain resources which is contributing to extended delays in getting products back in stock. If an item shows out of stock online, please feel free to call our Customer Service department to place an order over the phone and secure your place in line for the product. This item is now in stock on our website www.knfilters.com/69-8620ttk-performance-air-intake-system
First and foremost, it’s overpriced absolutely. Secondly, the overall fit is not as expected for something that specific to this make and model. Why? It’s a bit of a struggle to remove some of the original parts so plan for additional time. The instructions for the EVAP connector wasn’t clear. Why? Had to get help from my mechanic buddy. Note: it’s a possibility to throw a CEL because of the MAF sensing new flow parameters... suggest you clean the throttle body. No mention of that in the instructions either. Why? Once it’s in and the motor has “settled in” with the new mod the sound is the most apparent like any other CAI. K&N claims 5 HP is probably accurate but you only really feel it at 4500 RPM to redline. The throttle response is a bit more responsive at high RPM and revs appears to climb a tad quicker. Overall it’s probably borderline worth it but the price should be at least $100.00 less....can’t see where the cost is. The look of the monster filter is pretty cool looking too. Overall maybe a 7/10
i have no clue how to install this even after viewing the instruction video...can those garage shop pro do this for me? i am not sure if they can do this...where can i find someone to install this for me??
2010V6RAV4 Not in all cars, and it can add power if your car comes with a restrictive intake and can be a "bottle neck" if you have other mods (headers, exhaust, cams, etc.)
+Jairo Calero in a high performance car, maybe. they tested a WRX I think, and it lost power. this little piece of crap 2.5 engine isn't high performance and it's not reliable either. giving it more power will definitely shorten it's life. prone to cam gear failure.
No, this system will not work with the hybrid. If you have any other questions please feel free to contact our product specialists at 800-858-3333 or tech@knfilters.com
My fuel consumption is about the same, maybe 2 or 3 mpg better, but if you like the sound you may find yourself stepping on the gas too much and losing small gain.
All K&N intake systems are designed to work with factory ECU settings and do not require a tune. If you have any other questions, please contact our product specialists at 800-858-3333 or tech@knfilters.com for assistance.
If you would like to find K&N products for your vehicle but know know the engine size, consider using the V.I.N. lookup tool at knfilters.com. Select "Search by VIN" and enter your vehicle's V.I.N. number to see a list all the products that K&N makes for your vehicle. If you need additional assistance, please feel free to contact our product specialists at 800-858-3333 or tech@knfilters.com.
Please visit the product page at knfilters.com for an up-to-date list of applications. You can also enter your vehicle's year, make, model, and engine size for a complete list of all the products K&N makes for your vehicle.
The K&N 698620TTK intake system is currently designed to fit the 2012 - 2017 Toyota Camry 2.5L non-Hybrid model. At this time, K&N does not offer an intake system for the Hybrid model. If you have any other questions, please contact our product specialists at 800-858-3333 or tech@knfilters.com
@@toee9553 because Toyota tuned the engine for a stock filter. When you randomly add more air flow, you throw off the stock computer tune. This is something dumb 16 year old kids do. Do yourself a favor, keep it stock.
gonadiator I hope you’re joking right? Any modifications like bolt on will always tamper the ECU. That’s why people get their car tuned to make everything compatible and run way better than before. There are ton of tunes for the Camry. A stock Camry vs Modified Camry with a proper tune is huge different. You’ll get more mpg on local and highway lol.
yes. factory intake. watch CAI mythbusted on RUclips. these things are under the hood causing them to suck in engine heat. by the way the 2.5 engine in toyota is a sorry, sucky, piece of junk. TSB 0146-10. it's been revised so read the revision. tell people in California to avoid this junky engine.
+2010V6RAV4 it's a good motor. I've read a lot of good things about the 2.5. of course the 3.5 v6 is a better motor but the little 4 cylinder is a good motor
+Armando Gonzalez not arguing, just stating facts and the 2.5 has cam hear failure and it's easily heard on a cold start. I have had two of them and of them have suffered with cam gear rattle related to The TSB 0041-13. it's a very noisy, whining, rattling piece of junk.
All K&N intakes are dyno tested to provide a guaranteed increase in performance using factory ECU settings. If you have any questions regarding performance gains, please contact our Product Specialists at 800-858-3333 or tech@knfilters.com.
@@KNfilters I know, I've seen those claims. If you want to do this, you need a high tech scan tool to reprogram your car's computer so it still runs efficiently. Either way, a 4-5 HP increase and decrease in MPG for a $300+ air intake kit isn't pleasing. Sorry
They probably wish they were aloud to and could afford to put them on all production vehicles. But they have to meet stupid noise requirements and other dumb rules.
![Toyota Camry 3.5L [#69-8618TS] K&N Air Intake Installation](http://i.ytimg.com/vi/F5AJ93mabC4/mqdefault.jpg)
Growl, love that intake sound
I did this to my Camry today and oh boy!! As a car guy this is a huge difference if you want the car to sound way meaner it will when I instal this I do recommend a professional or someone with a lot of tools and knowledge this was a fun install and it makes the Camry way more fun!!!
I was just wondering when you installed yours did you put two hoses on the on the evap purge valve or did you put one line on the back of the intake?
@@corymoon1445 I followed the k&n intake video on RUclips I did hook up the evap hose to the back of the intake (on the metal pipe) and moved that sensor (i honestly can’t remember what it was) I think it was a mass airflow sensor don’t quote me but I mainly did the modification because I wanted more sound without changing up my exhaust any since the Camry already has nice engine sound this intake wakes it up and makes it a way more sporty feeling of a car… if I do ever sell the car I don’t have to weld up the old exhaust no nasty hack saw cuts on the exhaust no shotty welds just work from an honest fella 😂(all bolt on stuff I kept my old intake just incase it didn’t work out but within a month it felt really dialed in) can easily be reverted back to stock if needed.
@@corymoon1445 just one line for me
This was on my b dad and I love the in take sound
Fudge the power I want that sound on mines. You have my money K&N.🤑
WoW! This looks great! It's definitely going into my 95' Celica GT (one way or another).
Heard from a couple folks that the fit could be better on this one for the Camry.. that's what keeps me from buying, especially for so much.
I have a 2014 and it fits perfectly.
@@Treaxvour which one bro? Got a 2014 and want something that wont mess up my engine, would appreciate it😊
Install a drop-in. About same hp (3-6hp) but no growl.
What do you mean by drop-in?
@@alexanderyil8305 they make performance air filters that fit into the factory box, just like the paper filter does
How does this change the air fuel mixture settings that are programmed into the car's computers?
Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com for help with your question.
@@KNfiltersso they can snow people like your ads? Without more fuel no wsy to.make more power it is physics. To gain power you need.more air and fuel like a turbo or supercharger does. With out remapping ecu for more fuel you lean out mixture with just more air, and as most modern fuel injected cars are already lean to pass emissions more air alone is no hp gain and could lean engine to.point of damaging engine.
Just added this to my 2014 Camry I didn’t notice too much in terms of power when driving, but on the highway getting up to higher speeds was more of a breeze. Is the growl supposed to be very loud? I found it to be very loud inside the vehicle when driving.
Yes, it’ll be loud. That’s a good thing, enjoy it man!
Only thing I’d worry about, is driving in the rain. Not to stress it, but that’s it really. Noise is good, as long as it’s not Rattling, or sounds likes it’s hydro locking, your good.
@@dylahaw do you think a muffler delete plus the k&n intake on a 2018 Camry is a good start?
@@aziahcorbett6196 yes. Especially if your a dual exhaust, it’ll sound better, if it’s a single exhaust I’d do nuff and res delete for a louder tone, if you want a deep low and not as loud do muffler delete. But if you have dual exhaust do just a muffler delete.
@@aziahcorbett6196 and as far an intake, I don’t believe in them really 😂 unless it’s a cold air intake, but it’s more for show otherwise lol. I’d spend that 350$ on something better, tint, put it toward wheels coil overs lol, I’m saving for coils right now cam.
Once you have installed all of it, do you need to get your car re tuning?
All K&N air intake systems are designed to work with factory ECU settings and should work out of the box. If you encounter any issues, please contact our product specialists 800-858-3333 or tech@knfilters.com for assistance.
2 question is it a short ram and if not would this handle rain in las vegas it barely rain but here n there are some flash flood
Hi how to removal out side door handle? Toyota camry 2013
I was just wondering where does the evap purge valve bottom hose come from does it come from the line or from the back of the throttle body?
Please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com for support
Is the filter k & n Ali affect engine in the future
why we need to change air intake?
You don't. Toyota made it a certain way and tuned the engine for a stock filter. Keep it stock if you actually care about your car.
@@gonadiator my thoughts exactly. It’s just an expensive gimmick, with little to gain.
@@gonadiator just wondering if I change out the stock air filter with the cold air intake will it damage the car in the future?
How much is the price included in shipping to Saudi Arabia and do you have any other modifications to the same car
Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com for help with your question.
It’d be nice if it wasn’t sold out!
Yes they was, go buy one right now they are available I just get my self one
Like make other companies, we are seeing an increased demand for products and delays in supply chain resources which is contributing to extended delays in getting products back in stock. If an item shows out of stock online, please feel free to call our Customer Service department to place an order over the phone and secure your place in line for the product. This item is now in stock on our website www.knfilters.com/69-8620ttk-performance-air-intake-system
This can fit on a Camry 2023 XSE ?
what about TOYOTA CAMRY HYBRID LE ?
First and foremost, it’s overpriced absolutely. Secondly, the overall fit is not as expected for something that specific to this make and model. Why? It’s a bit of a struggle to remove some of the original parts so plan for additional time. The instructions for the EVAP connector wasn’t clear. Why? Had to get help from my mechanic buddy.
Note: it’s a possibility to throw a CEL because of the MAF sensing new flow parameters... suggest you clean the throttle body. No mention of that in the instructions either. Why?
Once it’s in and the motor has “settled in” with the new mod the sound is the most apparent like any other CAI. K&N claims 5 HP is probably accurate but you only really feel it at 4500 RPM to redline. The throttle response is a bit more responsive at high RPM and revs appears to climb a tad quicker.
Overall it’s probably borderline worth it but the price should be at least $100.00 less....can’t see where the cost is. The look of the monster filter is pretty cool looking too. Overall maybe a 7/10
I agree with you i own the same Camry here
theory Also I find myself using the paddle shifters more often so as to get the satisfaction out of it 🤷🏽♂️
@@pm5487 I purchased a 120 intake with same kit basically. hope all works out
theory Good luck! What brand is 120?
P M my bad it was $120, hqculture on eBay
i have no clue how to install this even after viewing the instruction video...can those garage shop pro do this for me? i am not sure if they can do this...where can i find someone to install this for me??
Do it yourself.. Go to the forums and look at other peoples diy install and go from there
don't use it. "CAI mythbusted" on RUclips...type that in. these things actually reduce power
2010V6RAV4 Not in all cars, and it can add power if your car comes with a restrictive intake and can be a "bottle neck" if you have other mods (headers, exhaust, cams, etc.)
+Jairo Calero in a high performance car, maybe. they tested a WRX I think, and it lost power. this little piece of crap 2.5 engine isn't high performance and it's not reliable either. giving it more power will definitely shorten it's life. prone to cam gear failure.
@@MemphisMojo15s oh shut up. It's not a fucking supercharger. That will shorten engine life span. 5 more hp isn't gonna do a thing
ik this is 10 years old, but will this fit the 2AR-FXE 2014 hybrid camry?
No, this system will not work with the hybrid. If you have any other questions please feel free to contact our product specialists at 800-858-3333 or tech@knfilters.com
@@KNfilters is there a way to modify or cut down the shiled to fit?
Please feel free to contact our product specialists at 800-858-3333 or tech@knfilters.com for a detailed answer to your question
What does this do to fuel consumption
a guy i knew had a ford somethings car and it was ok and made noise but he said it burnt more gas
@@daylightsavior6745 thanks for the response
My fuel consumption is about the same, maybe 2 or 3 mpg better, but if you like the sound you may find yourself stepping on the gas too much and losing small gain.
@@Treaxvour 2 or 3 MPGs might be worth it in the long run, if you drive it right.
I have 2015 camry .does it need tunning after intake.
All K&N intake systems are designed to work with factory ECU settings and do not require a tune. If you have any other questions, please contact our product specialists at 800-858-3333 or tech@knfilters.com for assistance.
Could someone please tell me how can you tell if your motor is a 2.5 or a 3.5 I don’t see it anywhere under my hood for a 2012 Toyota Camry LS
If you would like to find K&N products for your vehicle but know know the engine size, consider using the V.I.N. lookup tool at knfilters.com. Select "Search by VIN" and enter your vehicle's V.I.N. number to see a list all the products that K&N makes for your vehicle. If you need additional assistance, please feel free to contact our product specialists at 800-858-3333 or tech@knfilters.com.
Find your car VIN number and check the details about the motor
It’s either got 4 cylinders or 6 cylinders in that case just count
There was no Camry “LS”
Does it fit Lexus ES300h?
Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com for help with your question.
what size socket and wrench do you you need
Check out the "Tools Needed" section of the instructions kandn.com/instructions/69-8620_inst.pdf
What we do with the bottom of tube the whole that have ?
Near c.intake tube
Please contact our product specialists at 800-858-3333 or tech@knfilters.com for assistance.
Will this fit a 2009 Highlander, same engine ?
Please visit the product page at knfilters.com for an up-to-date list of applications. You can also enter your vehicle's year, make, model, and engine size for a complete list of all the products K&N makes for your vehicle.
does it work on Rav4 2014?
It doesn’t “work” on anything
It works to a hybrid?
The K&N 698620TTK intake system is currently designed to fit the 2012 - 2017 Toyota Camry 2.5L non-Hybrid model. At this time, K&N does not offer an intake system for the Hybrid model. If you have any other questions, please contact our product specialists at 800-858-3333 or tech@knfilters.com
all this for how many extra ponies?
.02
5 tops
So this isn’t legal in California?
Not at this time, however check back later as we regularly add new 50 state legal products to our website.
Yea.. ill stick to my factory style air filter.. too much work... this is not required.. it will probably ruin your engine in the long run
How?
@@toee9553 because Toyota tuned the engine for a stock filter. When you randomly add more air flow, you throw off the stock computer tune. This is something dumb 16 year old kids do. Do yourself a favor, keep it stock.
@@gonadiator what about getting a new exhaust for your camry. I have a 2011 camry 4 cylinder. Keep it stock or can I change it to get a better sound?
gonadiator I hope you’re joking right? Any modifications like bolt on will always tamper the ECU. That’s why people get their car tuned to make everything compatible and run way better than before. There are ton of tunes for the Camry. A stock Camry vs Modified Camry with a proper tune is huge different. You’ll get more mpg on local and highway lol.
Jean Lubeus you can change it. Don’t listen to this guy lol. Guy is probably a boomer and is old fashion.
Anyone know of something legal in California with the same results?
yes. factory intake. watch CAI mythbusted on RUclips. these things are under the hood causing them to suck in engine heat. by the way the 2.5 engine in toyota is a sorry, sucky, piece of junk. TSB 0146-10. it's been revised so read the revision. tell people in California to avoid this junky engine.
+2010V6RAV4 it's a good motor. I've read a lot of good things about the 2.5. of course the 3.5 v6 is a better motor but the little 4 cylinder is a good motor
+Armando Gonzalez not arguing, just stating facts and the 2.5 has cam hear failure and it's easily heard on a cold start. I have had two of them and of them have suffered with cam gear rattle related to The TSB 0041-13. it's a very noisy, whining, rattling piece of junk.
+2010V6RAV4 GEAR, not hear.
It’s a known fact that living in the state of cancer may cause California…
Does this fit Camry 2017 Se 2.5 ???
I wanna purchase, so just wanna make sure if it fits.
It should
It's the same engine design as the one in the video, so it should fit.
$340 for this, that is way over priced
Shop around. You can get it for $260 or so.
CrazyAlien96 where would I find one for 260?
Save your money not worth it
Its now $500😭
It doesnt work unless you flash ECU. Otherwise not much differences on performance side.
All K&N intakes are dyno tested to provide a guaranteed increase in performance using factory ECU settings. If you have any questions regarding performance gains, please contact our Product Specialists at 800-858-3333 or tech@knfilters.com.
Give me a second to stop laughing
Y
Really? "Cold air intakes" are not effective without retuning from stock. Otherwise, it will run poorly.
Sorry Josh, but that's simply not true. We dyno test each intake application and guarantee a horsepower increase. No tune necessary.
@@KNfilters I know, I've seen those claims. If you want to do this, you need a high tech scan tool to reprogram your car's computer so it still runs efficiently. Either way, a 4-5 HP increase and decrease in MPG for a $300+ air intake kit isn't pleasing. Sorry
Y’all go through this for 5 horse power boost😂
It’s easy to install 🤷🏽♂️😂
its WAY simple to do? I cant do any engine or actual real mechanic work and I can do it.
the better insult is "yall spend $400+ for 5HP?!" lol
@@KumoGoesFast pointless. 5 hp gain and suck in hot air from the engine compartment
why bother.....
Bs
Stupid Toyota engineers they're never came up with this idea
They probably wish they were aloud to and could afford to put them on all production vehicles. But they have to meet stupid noise requirements and other dumb rules.
They no it’s not good to suck in hot air from the engine compartment
Who puts an intake on a Camry. Smh ricers.
How much price ari filter 2014 camry
Send it Everyday LS swap
Anyone who chooses to
People who put garbage can mufflers on their vehicles, that’s who.
I have a 2014 camry with the 2.5L I4 its 2014 but will it fit?
Yes this part will fit your application. Check out the product page on our website www.knfilters.com/69-8620ttk-performance-air-intake-system