2007 Chrysler 300C Key FOB Repair
HTML-код
- Опубликовано: 15 сен 2024
- In this video I will show how to fix a key FOB for a 2007 Chrysler 300C. If the remote functions on your key no longer work this could be your problem.The fix is pretty simple if you have a soldering iron and are a little bit handy. This might work for other keys of a similar design too.
Very nice repair. We just bought a 2007 300C from a less-than-honest car dealer. One of the keys was bent and wouldn't start the car at all. I've been putting the car back together and will add this to my to-do list! Thank you and best wishes from Ireland!
Congrats on the purchase and I hope you enjoy it as much as I do mine. It is still looking as good as it did in that video. I am currently overhauling the suspension but other than that the car is solid. The 5.7 engine is a beast and one of the best engines I have ever owned or worked on. A very underrated car IMO. I will have mine forever !!
well done colleague I fixed my key thanks to you !!!! 👍👍👍
Great. Glad it helped you out. Thanks for the comment.
@@Alan_Edwards you nomber one!!!
I’ve had the exact same problem as long as I’ve had the car ! Thank You !
I hope it works for you. Both of my keys are still working fine too.
Thank you. Omg You saved my life. I had one key. Now I'm about to have 3 thank u again
Cool...glad it helped you out.
Thank you very much my keys stopped working today I’m going to try to fix it tomorrow
Good luck. If you have questions shoot them over and I will do my best.
I will try to fix it following your instructions. Thnx !
Good luck !!
I m 15 from Moldova and this is my dream car.
Well I hope you can get one some day. I love it and have no plans to ever sell it. It looks great and is fast as heck. Take care.
@@Alan_Edwards Thx
Thanks so much awesome video🙏🏽🙌🏽 God bless you bro
Thanks for the comment and blessing. AE
Your fix solution worked. Thank you
Cool...glad it helped.
VERY HELPFUL 👍👍👍👍👍👍👍 THANKS
Cool I'm glad it helped you out.
That’s exactly what’s wrong with mine!
Thanks
Cool I hope it works for you then. Good luck.
Can you tell me where the transponder is located. I know I'm looking at it but just don't know which part it is. Thank you.
Can't really say mate. I am not quite that technical.
@@Alan_Edwards I appreciate your quick reply. I got the answer its the rectangular "thingy" wrapped in copper wire. Thanks again!
👍🏾
Thank Youuuuuuu!!!
Would this be the same as a 2005?
You know I am not sure how far back it would go, but I suspect it's similar. I know they did not make a lot of design changes until 2009 so it's probably a good bet.
Please let me ask you a question.
My 300c has the same symptoms. But it's the immobilizer key. Can it be repaired in the same way?
Sorry I don't know. If you can open the key and it looks the same inside then maybe. But I am not familiar with that type of key so can't say for sure. Good luck.
Thank you for your kindness.
I will refer to your video.
I'll give it a try.
Have a good one!
Was you able to start the car with the keypad not working?
Sorry for not getting back sooner. Yes I was still able to start the car when the keypad was not working.
I was called to another garage to fix a 2005 300c chrysler with a v6 engine and an automatic transmission. The problems they noticed with the car was Hard or no start, no throttle response,battery and ESP light remaining ON, most times immediate stalling after starting however, if it doesn't stall there's a rough idle throughout idling as a result an old PCM was replaced with a new one however problem still persisted.
I did all system scan and saw a P0340, P2167, P2166, P2115, P2116, p0603 and more module codes like C2202, U0168, U1414, B1A25, etc.
Only DTC scan I got p0403, p0403, p0340, p0052, p0058
Please, how can I fix these problems?
The major problem is that whenever the red round light probably, the security light, if it remains ON, the car won't start at all however even if it does start by chance, the car would definitely stall immediately.
On the otherhand , if the red perhaps security light blinks and battery light goes off, it will have only hard starting but would definitely start. Firstly, how can I fix the security issue? The client said: "he doesn't want anything security in the car anymore." How should I proceed to disabling that security completely? It's because of that that made the engineer encourage them to get a new ECU.
Please🙏, help me with the repair procedure and also wiring diagram showing power distribution layout identification for the engine bay and rear fuses.
ruclips.net/video/nFA5iHxwX_c/видео.html and ruclips.net/video/omRXM_SU0OI/видео.html explains more what I'm trying to explain.
Please, can you also provide me with the engine bay and rear fuses description for the car? The reason for that is, when testing the rear fuses with a testlight connected to ground without the ignition turned to Acc position that's fuse 31 precisely, it lit the testlight though however, relay number 21 actuated. Thus, I pulled it out and check the relay circuit and noticed this 👇. What could be responsible for that; and could it be responsible for the flashing and steady security light?
In addition, is there a guide to fix the security problem or even disabling it?
ruclips.net/video/YRaz8d2xkKk/видео.html
Sorry can't help you with these problems - they are a little outside of my expertise. Hope you are able to figure it out.
@@Alan_EdwardsOk. Not yet
Having the same issue but car won’t start
هل يمكنني اعمل بصمه الى سيارة كرايسلر 2007وهل تؤثر على اداء السياره ارجوه الاجابه
I honestly do not know. My guess is no it would not cause any performance issues, but that is just and educated guess. The key on the 2007 is not a true fob...it is still a mechanical key that could be copied using traditional key duplication methods.
@@Alan_Edwards❤هل يوجد مفتاح احتياط الى كرايسلر 2007 واين مكانه في السياره اين مخباء
@@HAMiD-f9l Not that I am aware of
@@Alan_Edwards❤ماسبب نقص الماء من سيارة كرايسلر 2007للعلم قمت بستبدل الراديتر ولحد الان نقصفي الماء بدون ان ارى اي ياثر الى المياه تنزل على الارض ما هو السبب واين تمكن العله بضبط
I thought I kept getting salty battery’s or something
Glad it helped.
My car won’t start the car but the auto start works ughh! lol