Looks great. There's something to be said about hiking through the hills and collecting your sap. If I might offer, though, you can buy Pine Tar by the pint, quart, or gallon. It's just pine resin that's been extracted on a large scale. Those turpentine fumes you mention are because there's turpentine in the pine sap, and heating the wood in big ol' ovens is how they get turpentine for sale. The pine tar, once referred to as Stockholm Tar, is the single best preservative and general-duty finish for wood that I've ever run across. Not only does it give a nice color, imo, but it has anti-microbial action going on that prevents mold, mildew, and boring bugs from bothering your stuff. I use Pine Tar to treat all my tool handles in the smithy. If you thin it down with turpentine, it goes on smooth and really sinks into the pores of the wood. Add some shellac flakes if you want a shinier, more durable finish like on a table top. Sailors have used Stockholm Tar for eons to preserve their wood and rope.
I did a similar process to make a sticky wax. Collected pine pitch, rendered beef fat and blended it together with beeswax. I made it when I was a kid 30 years ago, and it still is soft and still smells amazing.
Hi, it holds thin sheet for hammering on. The pitch is heated till soft, then the plate is pressed in. When you hammer in a design, the pitch gives way, letting you raise and sink an image into it.
Great video as always. Very helpful and definitely useful and info. Thanks so much. Keep up the great craftsmanship and hard work my friend. Forge On. Fab On. Weld On. Keep the forge lit. Keep Making. God Bless
Way too slow. Just reducing the chunks down to liquid takes 30min. I was careful not to burn the pitch this time. Use a heat gun to soften after its poured, no direct flame/like a torch.
The project it's for is repousse, or raising shapes/forms out of sheet metal. I think I will make a repousse hammer and do a demo with it in the next video so it makes sense.
I didn't film it. A week of grinding and welding. Stacks of 1" plate welded up to a half round. A ring of pipe welded to the top created the depression for the "bowl".
@@rigoniironworks nice looks good might need revisit the algebra class to figure out the angle to pre grind the out side at. lacking motivation today tho
Isn't your pitch exceedingly hard? It would be too hard for Repousse work. My pitch is 50% resin, and 40% castor oil with the last 10% being beeswax and charcoal. If I want it harder, I'll add a bit of marble dust (I found plaster would clump and it was hard to get it smooth) but marble dust works well, and I can get it free from places that make monuments and gravestones.
No idea what it's for. If you need gobs of pitch, it's not hard to find. Unfortunately, the beetles have reached my property and my pines will now start dying. With the precipitation this year, they will be producing a lot of pitch to try to rid themselves of the beetles.
Pretty sure it’s for engraving/carving. I think the resin acts as a work-holding fixture. The resin can be heated up with a heat gun and it becomes malleable. While in a soft state, whatever you’re working on can be pressed into the resin and left to cool. When the resin solidifies, it is holding your work around 360 degrees. Or I could be totally wrong, in which case, disregard everything I said.
Looks great. There's something to be said about hiking through the hills and collecting your sap. If I might offer, though, you can buy Pine Tar by the pint, quart, or gallon. It's just pine resin that's been extracted on a large scale. Those turpentine fumes you mention are because there's turpentine in the pine sap, and heating the wood in big ol' ovens is how they get turpentine for sale. The pine tar, once referred to as Stockholm Tar, is the single best preservative and general-duty finish for wood that I've ever run across. Not only does it give a nice color, imo, but it has anti-microbial action going on that prevents mold, mildew, and boring bugs from bothering your stuff. I use Pine Tar to treat all my tool handles in the smithy. If you thin it down with turpentine, it goes on smooth and really sinks into the pores of the wood. Add some shellac flakes if you want a shinier, more durable finish like on a table top. Sailors have used Stockholm Tar for eons to preserve their wood and rope.
Wow love to learn how to make pitch, and your workshop is so amazing, congratulations! Pure inspiration, thank you!
That is the most aesthetically pleasing bowl of pitch.... that povely flat reflective surface. Awesome video!
I’m envious of your shop and the equipment that you have available!
I did a similar process to make a sticky wax.
Collected pine pitch, rendered beef fat and blended it together with beeswax.
I made it when I was a kid 30 years ago, and it still is soft and still smells amazing.
The rendered fat doesn't spoil? I've never tried tallow/fat.
Thank you for this, I bought 500 grams of pure pine pitch to use in a smaller bowl. I took forever to find a video with the process and recipe.
Awesome. Looking forward to seeing what you're going to do with it!
Very informative without a word 😁
Ha, that's how I roll :)
Whatever John does, it’s cool. ❤
Well, thanks! I hope to live up to the hype, haha
Reminds me of two things -- making candy, and making the beeswax/rouge paste I use on my strop. That base looks like it was a PITA to make!
Pardon my ignorance, what is this for?
Hi, it holds thin sheet for hammering on. The pitch is heated till soft, then the plate is pressed in. When you hammer in a design, the pitch gives way, letting you raise and sink an image into it.
forbidden candy
Really good info. Looking forward to see you chasing out something. Thanks!!!
What will you use that for
Great video as always. Very helpful and definitely useful and info. Thanks so much. Keep up the great craftsmanship and hard work my friend. Forge On. Fab On. Weld On. Keep the forge lit. Keep Making. God Bless
Would a double boiler work or too slow?
Way too slow. Just reducing the chunks down to liquid takes 30min. I was careful not to burn the pitch this time. Use a heat gun to soften after its poured, no direct flame/like a torch.
Shout out to everyone who's now got a craving for a bit of dark toffee.😅
sorry but what is it used for?
Repousse. It will make more sense in my next video.
@@rigoniironworks cool cant wait!
There's a nice series that shows the many steps in a detailed repousse:
www.youtube.com/@user-tm5rb3ne3e/videos
I don't know what you're doing, but it looks pretty neat.
The project it's for is repousse, or raising shapes/forms out of sheet metal. I think I will make a repousse hammer and do a demo with it in the next video so it makes sense.
What is this used for?
That bowl is exceptional! Where did you get it? Great work as always!
I made it. Torch cut 1" plate, welded it into a sphere and welded a ring on top to hold the pitch. *About a week of welding and grinding.
like to find that bowl sphere
I had to make this one, but they sell smaller versions online.
@@rigoniironworks i read the description.
any chance u have the video
I didn't film it. A week of grinding and welding. Stacks of 1" plate welded up to a half round. A ring of pipe welded to the top created the depression for the "bowl".
@@rigoniironworks nice looks good might need revisit the algebra class to figure out the angle to pre grind the out side at. lacking motivation today tho
Scribe a half circle in wood. Use that as a guide. Grind/fill with weld till round.
What is it for
How it works is you heat up the surface and press sheet metal into it. After it cools, you hammer designs into the sheet.
@@rigoniironworks ok cool will you be showing it in use at anytime?
I need a cool project involving repousse. In the future for sure.
Isn't your pitch exceedingly hard? It would be too hard for Repousse work. My pitch is 50% resin, and 40% castor oil with the last 10% being beeswax and charcoal. If I want it harder, I'll add a bit of marble dust (I found plaster would clump and it was hard to get it smooth) but marble dust works well, and I can get it free from places that make monuments and gravestones.
Yes, it is a hard pitch. I heat the surface to work at times.
So you make it and then just let it sit for years and years...kinda odd but ok.
No idea what it's for. If you need gobs of pitch, it's not hard to find. Unfortunately, the beetles have reached my property and my pines will now start dying. With the precipitation this year, they will be producing a lot of pitch to try to rid themselves of the beetles.
Pretty sure it’s for engraving/carving.
I think the resin acts as a work-holding fixture. The resin can be heated up with a heat gun and it becomes malleable. While in a soft state, whatever you’re working on can be pressed into the resin and left to cool. When the resin solidifies, it is holding your work around 360 degrees.
Or I could be totally wrong, in which case, disregard everything I said.
This does not look appetizing at all