Shocking Truths About Concrete Strength, Curing, and Engineering Practices
HTML-код
- Опубликовано: 4 июн 2023
- This video is an informative exploration into how you can achieve peak or ideal concrete strength based on your concrete strength design, especially when your construction project is exposed to a range of environmental conditions.
Achieving peak concrete strength is a crucial aspect of concrete construction, and the process to attain it varies depending on the conditions and techniques used. This informative video delves into the complexities of concrete curing, particularly when the construction elements are exposed to diverse environmental conditions.
Through our analysis, we highlight the performance of curing tanks and the outcome when concrete is left exposed. Curing tanks, known for their controlled environments, maintain an optimal level of moisture and temperature to support the hydration process, resulting in concrete with increased strength and durability.
On the contrary, exposed concrete, if not properly managed, can lead to surface cracking, reduced strength, and longevity due to the impact of environmental factors such as wind, sun, and low humidity. Our comparison provides critical insights into how these different curing circumstances affect the overall strength of the concrete.
Our study features three prominent curing methods: the classic approach of sprinkling water, the tried and tested wet burlap technique, and the innovative use of curing compounds. With this comparative guide, we help you understand "how to achieve peak strength in concrete," providing key insights into different methods that aid in enhancing concrete strength.
Unveiling the science and technology behind one of the most reliable curing methods, we introduce Cure Sil EB and WB, two state-of-the-art curing compounds. We dive into the benefits of using curing compounds like these and show you, through comparative analysis, how they fare against traditional curing methods.
In addition to showcasing the benefits of Cure Sil EB and WB, we explore the importance of adapting to different environmental conditions. As each environment presents unique challenges, using the right curing method can lead to remarkable improvements in durability.
While focusing on the question "how to use curing compounds for concrete construction?", we provide an unbiased examination of these advanced methods. Our goal is to share knowledge and techniques that can lead to the successful execution of your construction projects.
The quest for the "methods to increase concrete strength" is a persistent one in our industry. This video not only addresses that but also sheds light on the overall process of "concrete curing for improved durability".
Whether you are a seasoned construction professional or a novice, this video will equip you with a deeper understanding of concrete's fascinating world, its strength, and the incredible journey of its curing process.
Very informative sa mga ordinary non technical peeps po..Sana magpost po kayo ng step by step from pagkabuhos nung cement then kelan ilalagay,,hangang kelan papatuyuun at paano kung umuulan after nilagay yun compound....tapos kelan din dapat ilagay ang waterproofing incase roofdeck siya lalagyan.
Thank you for your suggestion. We will relay this to our social media and creatives department.
Nice one
Thanks for watching
Any recomended rust prooping for metal tnx
Hi, thank you for your inquiry. We recommend using Rust converter on rusted areas, apply primer then top coat. You can watch this video for your reference: ruclips.net/video/NgcIbsTNnkU/видео.html
I might have missed it on the video, when is the best time to apply it on columns?
Hi, thank you for your inquiry. You can use curing compound in vertical and horizontal concrete structures. You should apply it 1-2 hours after placing. ruclips.net/video/OmGqjxcmkZM/видео.html
Hello Sir good day, please advise what kind of your product can fit to my 2 storey residential building probably pra po sa Beam at Slab using Bagger mixer thank you
Hi, thank you for your inquiry. You can use Readycrete 4k or Readycrete 6k. You can watch this video for your reference: ruclips.net/video/utaZUDuqF2I/видео.html
Ano po ba dapat na skimcoat na ang pader eh magaspang po tapios may pintura na po,. Gusto ko sana lagyan ng skimcoat.
Hi, thank you for your inquiry. Skim coat is for bare substrates only. For rough painted walls, you can use Putty Master to smoothen out the area. You can see this post for your reference: facebook.com/photo/?fbid=197902296092884&set=a.184760584073722
Gagawa po Ako Ng rooftiles anu po admixture kailangan ko para tumibay at mabilis ma curing
Hi, thank you for your inquiry. Please message us on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
pa ano po kaya pweding gawin sa flooring na lumulubog dahil po sa hindi nasiksik ng ayos ang lupa bago latagan ng cemento?? thanks po
Hi, please send us via our official facebook page for the actual photo of your floor's current situation, so we can identify and recommend a proper product. Thank you
facebook.com/BuildritePhils
Good morning sir
San po ba mkabili ng mga product nyo.
Hi, you can order online via our Magna Prime Shop (bit.ly/3D8vqLx), official Lazada and Shopee shop (s.lazada.com.ph/s.fFwNe) or you may send us your exact address via our Facebook page for us to assist you in locating the nearest store in your area: facebook.com/BuildritePhils
once lng po ba ito i apply after 2hours paka slab? or kelan pwede mag apply ulit?
Magandang Araw! I-spray lang po ito sa buong surface ng isang beses, basta po masiguradong ma-applayan ang buong surface base sa recommended coverage nito na 100m2 kada 20 liters.
Interior wall waterprófing
Hi, thank you for your inquiry. In some cases, it's difficult to waterproof the positive side of exterior walls because of the obstructions outside the structure. For high-level floors like condominium units, applying a waterproofing membrane from outside the building is impossible. As a result, we recommend negative side waterproofing such as Flexor (for second and higher floors) and Crystor (for basement up to ground floor).
If you need technical assistance, you can send us a message on our official Facebook page. We are more than glad to help.
facebook.com/BuildritePhils
Okay so sa paghahalo po dpt may pc100 then after itong curing.
HI, thank you for your inquiry. Ritemix PC 100, PC 200, and PC 300 are admixtures for concrete mix. While Cure Sil EB and Cure Sil WB are curing compounds which ensure that the concrete achieves a proper curing process and its designed strength.
San po pwede bumili ng mga product nyo?
Hi! you can order online via our Magna Prime Shop (bit.ly/3D8vqLx) , official Lazada and Shopee shop (shp.ee/4qyr3gy) (s.lazada.com.ph/s.fFwNe) or you may send to us your exact address thru our official facebook page facebook.com/BuildritePhils and we will be more than glad to help you find the nearest store or hardware where you can buy our products.
Kung pwedeng Malaman Ang design strength sa gantong kaliit na sample bakit Yung sa construction kailangan Malaki at cylindrical pa
Hi, thank you for your inquiry. Please send us a direct message on our Facebook page so we can discuss your inquiry: facebook.com/BuildritePhils
Hi sir, san po pwede mag order ng solid cure online?
Hi, you can order online via our Magna Prime Shop (bit.ly/3D8vqLx), official Lazada and Shopee shop (s.lazada.com.ph/s.fFwNe) or you may send us your exact address via our Facebook page for us to assist you in locating the nearest store in your area: facebook.com/BuildritePhils
Hindi na po ba pwedeng iapply after 15 days na nakaslab na? Kasi po yong slab ng bahay namin 14 days na pero may mga cracks. Ano po pwedeng gawin doon?
Thank you.
Hi, thank you for your inquiry. Hindi na po mahahabol ng curing compound kung 14 days ng cured yung concrete. Wait nyo po mafully cure up to 28 days bago kayo mag proceed sa repair. For technical assistance, message us on our Facebook page: facebook.com/BuildritePhils
Sir tanong ko lng sir magkano ba yang product nyo po
Hi, Thank you for your inquiry! Below is our price list for Cure Sil EB and Cure Sil WB:
BUILDRITE CURESIL EB 20 Liters
Regular price₱1,232.00
shop.magnaprime.com.ph/products/buildrite-cure-sil-eb-20ltrs?_pos=3&_sid=8305efd09&_ss=r
BUILDRITE CURESIL WB 200L/drum
Regular price₱5,018.00
shop.magnaprime.com.ph/search?q=cure+sil+wb
BUILDRITE CURESIL WB 20 Liters
Regular price₱817.00
paano mo naman malalaman na na achieve mo na ang 70%.
Hi, thank you for your inquiry. Normally po sa concrete 7 days dapat ma-achieved na ang 70% na to 80%.
@@BUILDRITECONSTRUCTIONCHEMICALS i mean po ano ang mga indications na nasa 70% to 80% na ang strength ng concrete. makikita ba sa appearance niya?
Please message us on our Facebook page so we can discuss further regarding your inquiry: facebook.com/BuildritePhils