How to Program Your Rain Bird ESP-RZXe
HTML-код
- Опубликовано: 9 фев 2025
- Sometimes Retic Controllers can be a daunting to program if your are not doing it that often. I have made this short video on how to program your Rain Bird RZX Retic Controller or Irrigation Controller. depending on what side of the country you live on.
If you would like more information about retic controllers please visit our website (link below) or send me a message.
www.mrretic.co...
thank you Mr Retic
You're welcome
So just to be absolutely clear Mr Retic ( thank you for a very helpful channel) I have a Rainbird. I want the system to start 6.30am. Do I type in 6.30 on program 1 and leave both times blank on the other programs and it will then run consecutively for 10 mins on each? Or do I type in 6.30 on the other programs as well?
Currently I've put individual times in each program but when it runs the cycle, program 1 stays on the whole time. Is that why or do I have another problem?
Thank you sir, you made it easy.
Glad it helped
Thx for this!
Our pleasure!
Thanks a ton mate !
Cut to chassis 👍🏽
No problem 👍
Hi, thanks for you video! Do i need to set start time for every zone separately? For example i want to water zone 1 for 10 min starting 5:00, then zone 2 for 10 min but starting 5:10. So i suppose i need to set the different starting times? Thanks in advance!
Hi Fotis, no you only need to set one start time. Otherwise the other stations that you have programmed for different times will run multiple times.
@@MrRetic Thanks!!
@@MrRetic Hi from Germany and thanks for the video! I still have a problem (or better: lack of understanding): I want each zone to run for 20 minutes and only one zone at a time, so first zone should start at 6:00 am, second at 6:20 am, third at 6:40 etc. Do I really have to set ALL zones for starting at 6:00 and running 20 mins and the system will let them run one after another?
If that‘s the case: how can I make two zones starting at the same time and running parallel? Your help would be kindly appreciated! 👍
@@marianhoffmann3067 hi Marian, yes you want them to come on in the same program. So if you have them all set to come on at the same time. The the stations will run for 20min each if that is what you have set it for, one by one after each other. They won’t all come on at the same time.
The problem is if you have different starting times. 6.00, 6.20, etc what will happen is that some of the stations will come on more than once.
@@MrRetic thank you! 🙂👍
👍💕💃💃 مشكور
thanks! question please, can this unit set different watering days by zone? I have a natives zone, so less days for that one
Yes you can go to each zone and adjust the amount of time it runs for and the days it runs on.
Does this come with the Wi-Fi installed I have the E model , do I have to buy anything extra ????
Hi I believe you would still need to add the Wi-Fi module(LNK2) to that unit and then connect it to the internet,
@@MrRetic 👍🏻
If i have programmed a second time per zone how do i cancell it for just a single time?
Hi You would have to remove second start time or press red button to turn off controller but it will skip all watering until you reactivate auto mode.
If i want to run it just for a minute at one location do i have to set the time month and year?
Hi Yes you would need to set up time and date, so you can then the schedule for the time you want it to run on.
hi, thanks for you vidéo. I would like to erase memory. how to do that ? Thanks in advance.
How to erase memory:
1. Open up the casing that has the wifi controller (the lower half)
2. Push reset button for 10 seconds
I hope this helps :)
How to stop sprinkler because I turned off everything but water still going on .
Hi Sorry for the real late reply, it sounds like you may have a faulty solenoid or two.
ho un problema ho provato a programmare la mia zona 1 mi dice orario cosa fatto e mi da la seconda fascia oraria cosa che ho sbagliato perchè voglio solo la zona 1 con una sola partenza ogni giorno stessa ora e stessi minuti come resetto ? il secondo orario? Grazie
How do I delete a second watering time for a zone?
If you go over to the starting time setting in the scheduling settings. And press the minus button until it says 0.00 then you have cancelled out that starting time.
Ecouter cette vidéo en français merci pour votre réponse
Como se conecta conpleto
Hi
It's written no AC
Hi that means it has lost power from AC, could be turned off or faulty. Thanks
বাংলা অনুবাত,কথা ই
Nothing understand
Hlo sir
How do I cancel a 2nd watering time in a zone. Only want it to water the zone once in a day.
Hi Thanks for contacting me, you can go to the zone you want to change and press across till you get to the second time and then press up or down to remove the time. Hope this helps.
How do I turn a station manually?
Press Manual button and select station you want to run manually and press across, display should then show watering.