Pit Boss PBV3G1 Vertical smoker natural gas conversion

These are the steps I took to convert my Pit Boss PBV3G1 vertical smoker to natural gas from propane.
Link to the orifice kit: www.amazon.com...
Link to the hose: a.co/d/0bcjAPNV

[@mas7241]

Great vid. I'm looking to mod mine. Just a friendly note - at 2:42 the lower burner math says 0.9 mm = 0.35"
it should read 0.9mm = *0.035"* ? haha. That was throwing me off. Thanks for sharing.

[@tgraham360]

Ha, sure enough. I can't believe I said the right number when the wrong one was written down. 🤦‍♂️ Good catch.

[@caltown79]

having good results? can't believe i got this without realizing they don't have a specific kit. thanks for the vid. hose isn't in stock. any 3/8 connection hose do?

[@tgraham360]

Yup, works great. I might swap out the chip burner with a smaller orifice but so far, works great. Yeah, if you look on ebay for natural gas hose, you'll find ones that will work.

[@caltown79]

@@tgraham360 well i assembled it before i realized the swap was necessary. those four screws you refer to is that just for the heating element?

[@tgraham360]

@@caltown79 Yep, just the four screws and that whole bottom piece with the two burners will come off and expose the orifices.

[@runner12676]

Do you have links to hose and orifice kit you used

[@tgraham360]

You bet, I just posted them in the video description.

[@rickw4850]

No, propane is at a higher pressure than natural gas.