Malossi 124cc Cylinder Kit for Yamaha Aerox/BWS 100 - Unboxing
HTML-код
- Опубликовано: 11 сен 2024
- Unboxing and preparing a Malossi 124cc Cylinder kit for a Yamaha Aerox/BWS 100.
This kit is part of Malossi's Sport range. The increased capacity and larger ports give it a significant power advantage over the standard 100cc cylinder.
To find a Malossi Cylinder Kit for your scooter, visit www.scooterstr... and select your make and model from the selection.
Mum's gunna be spewin' when she finds out you used the nice white towels!!!
😂😂Best comment this year🏆
Hey is the cilinder full tuned or can you tune it even further ? and what is a good exhaust and carburator for this engine?
We have better performance when the cylinder is machined. Tecnogas RSII and 21mm Dellorto.
Do I need to change the shaft to use this cylinder or can the stock shaft handle it bc I know for 50cc when you upgrade to 70cc you sometimes need a stronger shaft so i want to find out before buying myself the mallosi 124cc kit thanks if you reply
Yes you do if the crank and bearing are worn or old.
@@scooterstreetauaw i have a new one but it’s a stock and will it withstand the power of the mallosi kit or do I need after market crank?
That should be fine for now.@@aleksandrasdambrauskas2065
Hello, when putting on the 124 cc malossi, which mainjet should I use in the mikuni original carb ( zuma/bws4vp100)? Thanks
You will find the standard main jet to be a 75 of 6mm. We always start at 90 and then lean it as required.
i have 86 on a 21 carb with 124 malossi
do you recommend putting this kit? or does it cause a lot of problems?
Yes, a Great kit👍
I’ve run into some problems with this kit that just don’t make sense to me.
So because the piston is so much bigger than the stock one when you put the wrist pin through the con rod the small end bearing can move side to side and nearly fall out which if happened at high rpm’s could be catastrophic. For the price i payed and being malossi you’d think it’d be a good quality product.
@@metsnocomment1993 did you figure this out ?
I have a scooter that has a 21 carb, and runs fine and everything until im gone for a week or more, and it wont start, any idea what could be the issue
Being unaware of what scooter model you have I would suspect an issue or adjustment with either of these: Choke, fuel tap, leaking carby, low compression, broken manifold or fuel lines.
@@scooterstreetau thank you so much, youve helped me alot, apreaciate it
@@robinmoldestad1679 Let us know the outcome✌️
Hi, i have Aerox 100cc and put Malossi 124cc.. but i think is not as good as they says. I put also Malossi Torque drive, Malossi Multivar with 7.4g rollers and yellow spring, Stage 6 racing torque controll MKII 112mm, Malossi Kevlar X K Belt, Carb Dellortho PHBL 25, Technigas Next R chrome, and i can see that most of the 70 cc Aeroxes just not so heavy tuned as mine are better in speed and acceleration as me.... WHAT IS THE PROBLEM ?? Please tell me
The Aerox 50cc is water cooled and they produce alot of power due to the water cooled engine and the small water pump allows an easier rpm to build.. The Aerox 100 is air cooled and has a large fan to do the cooling and the engine has to work hard to get this spinning so that should be your aim to build RPM as quick as possible. Have you tried to use a smaller carby? Also try a set of race clutch springs. Play around with a heavier set of rollers and only make one change at a time so the difference can be noted. Please let us know how you go?
@@scooterstreetau Thank you . i will try some of the tips :)
@@scooterstreetau Will this work on a Rattler Buck 110?
@@troybrown6218 The Rattler is a PGO which is based on the Minarelli engine (Yamaha). The 50cc engine does fit the Yamaha/Malossi kit, BUT I cannot say for sure if the Rattler 110 will fit as we have not had this machine in Australia..
My Naraku kit has Rings with 1V and 2V on them. Do you know which one goes on the top?
What is the part number for the kit? in most kits - 1 is top and 2 is 2nd.
@@scooterstreetau Naraku 113cc Performance Cylinder Kit for Yamaha Aerox - BWS 100cc 2T
@@timcity4040 1 is top and 2 is 2nd.
how many horsepower can a full 124cc setup make?
Between, 7-12
Hello. My aprilia scarabeo 100 2t scooter with airsal 117 cylinder technigas next-r exhaust is not good. What kind of exhaust would be good?
There are not many options with this engine. The Next R is a small improvement on the standard exhaust but will offer less power from the start.
You should consider the Tecnigas RSII, upgrade the carby to 22mm and upgrade the transmission.
@@scooterstreetau Thank you very much i have 21mm black dellorto has and pollini variator and polini gear
@@istvanbegany3889 Oh nice👍 The Tecnigas RSII will fit nicely with what you already have... I would drop the gear kit, for more down low fun.😉 The standard style exhaust such as the Tecnigas Silent Pro gives a good position from the start but will run out of puff at the top.
@@scooterstreetau Okay thanks a lot for the help, for me the top speed is important for long journeys I want to use. I have a piaggio thypoon 125 2t scooter to accelerate and race.😁
@@istvanbegany3889 All the best👌
do you have piston malossi 56mm? i need the piston only
Yes, check out the website for all the parts..
combien developpe choveu le cylindre malossi 100cc ?!!
Between, 7-12
Al poner este cilindro se puede recalentar la moto?
Sim.👍
Es válido para motor minarelli horizontal 49cc
Este vídeo é apenas para o motor Yamaha 100cc 2 tempos. Saúde
Should the original head be reused? Also, how much power should be expected from this cylinder? Is the power difference drastic and worth the change? Thanks.
Yes, this kit is made for the original head. The power increase is very noticable. We do recommend the Malossi carby 22mm. Part no. 1611430 and don't forget to maximise the transmission.
@@scooterstreetau where does this cylinder make the best power? Mid-range or high revs? Best exhaust to pair with it? Thanks!
The original head is a wave design.
It's junk.
Also,when you fit the original head to the big bore cylinder,there will be a large quench area around the circumference of the original head. This is not good!
When you fit the Malossi 22mm Dellorto carb kit that is designed for the Aerox 100,you will notice that the throttle will not lift the carb slide to full throttle.
It only lifts the carb slide 17mm,as per the original 17mm Teiki carb.
It is supposed to be plug and play.
It is not.
How did you guys overcome this issue?
Hi Scooterstreet, does this fit on a 50cc bws if so after changing the crank, carb and pipe, must I buy aftermarket gears or can I just keep the stock 50cc gears?
No, this is for the 100cc.. Completely different engines.
@@scooterstreetau Oh allrighty so I have to stick with the 70cc on the 50cc engine. Thanks for the quick reply.
Will this fit jog 90 case
Can i use that on bws 100 zuma?
Yes, I believe its the same model. Some countries called it the Zuma 100, some the BeeWee, some the BWS, also sold as the MBK Booster 100
Can you get one of these bikes to 70mph? If i threw on a 113cc kit with a v8 pipe, bigger carb with trans tuning?
Yes you can, to hit 70mph you will definitely need a gear up kit through. The 124cc kit is the way to go, the 113cc kit will only make a very subtle difference. The V8 exhaust is not a true performance exhaust, it will only make a very minor difference to the power. The Tecnigas RSII is the one to go for😎
Will this fit jog 90 4dm case
No, the Jog 90 cylinder is smaller, measuring diagonally stud to stud centre @ 71mm. The Yam 100 measures 75mm centre.
hp on the malossi ??
I find out for you.
@@scooterstreetau did you find out ?
@@leno3733 I never had a reply, sorry.. 🤷♂
Kymco top boy 100 is compatible;
Unfortunately we don't have that model in Australia
Cost?
www.scooterstreet.com.au/product/malossi-120cc-cylinder-kit-for-yamaha-100cc-aerox-bws/
@@scooterstreetau wtf, in europe i payd 125 Euro. And an info: the malossi belt it not fit because is 10mm high and 17,8mm large. The original is 8mm high and 17,4mm large. With malossi belt you don´t pass 90/95kmh. All what i say is tested on my Neos 100. Polini belt it will fit P248.041. i have all malossi (cylinder, vario, gears, Torque driver, fly clutch, 22 carb) but belt polini
@@29Nussi When you compare the base price, yes it seems expensive! But you have not considered Australian TAX or shipping to Australia which is very expensive. So luck y for you living near the manufacturer. Australia is very expensive.
Yes all true with the Belt, we use and recommend the Polini belt for the same reasons👍
Hi , I would like to get this kit for my bws100. But your website is down, may I know when will it be up again?
@@scooterstreetau hello i also want to buy a good setup for my 2002 aerox 100cc . What is a good combo for the big bore and complete variator and clutch setup and will i need to get a upgraded carby ??? Oh and are you guys australian because i live in queensland australia.
@@Rexx90 124cc malossi kit with Leovince touring and fly clutch system. Original carb with bigger main jet, runs great
Hi Ricky, hope your bike is running well!