It is nice to see one video out 50 where someone understands that this common issue is hardware related rather than software related. Thanks for making it. For those who are reading this comment, the issue is probably due simply to some dust and dirt between the contacts of the jack port, rather than those of the speakers. In the case of the retina 2012 for example, those contacts are under the little internal cable of the jack. So you need to take out the bottom cover of the macbook, unplug the cable of the jack, clean with alcol 96% its soldered contacts, which are just below, you can only see them after you unplug the cable, and in 5 minutes the issue will likely be solved.
I don’t normally comment on video posts but I have been trying to figure out why my computer all of a sudden had no sound, and why my internal speaker wasn’t showing in my settings this video was heaven sent thank you so much! The only video that had useful information for me and this situation. I just messed with my headphone jack and got it to come back on! I never would have thought of it again thank you 😁
That is the only method that worked for me, and now that apple do not give support for "vintage" products, It's was almost impossible to find someone that could resolve this problem. Thank you very much!
you are a f.... hero! I noticed that the pins that are together, are only for the right speaker. Maybe you have to solder all together to make both work Thank you so much for sharing your experience
You are my HERO !!!!. This was driving me crazy. Instead of using a jumper wire, I actually just soldered the two pins that were next t each other and Voila !!!
I really wanted to thank you man. i just soldered the pins and it really worked. it is unbelievable that the fix is so simple. you should go the the heaven if there is.
Hey man you are an angel. I been searching for possible solution because i have some issue. And then ive watch your video and it worked! I wish i could you beer man! Thanks a lot!
Love finding videos from random people it makes me so happy that there are intelligent people!! I know I sound stupid lmao but 4real; u give me hope for humanity. That said! lol I wonder if u could help me 🙈 my audio/sound stopped working after it fell off the bed 😶 it also sometimes goes through periods of me having to "tap" the bottom of it and hoping if comes on >.> Any ideas? ^_^ atm I'm gonna go try what you did for your issue...except the soldering lol but I will be messing with the sound ... " thing " ... u r awesome !
Before trying this extreme approach, try spraying some screen cleaner liquid or foam onto the 3.5mm jack and keep plugging and unplugging into the Mac headphone jack. TURN OFF THE LAPTOP FIRST. This worked for me in 2mins and is far less intrusive.
Thanks !that worked! i ended up putting foil papel making contact to those 2 component and put a bit of hard glue or crazy glue so it would stay in place then on top i added tape to make sure it would stay in place. worked like a charm! thanks
In my A1502 13" MBP no sound problem auto occurring without connecting headphones. i tried all type SW troubleshooting and finally installed Windows 10 on MBP but problem remains same. in windows device manager no sound hardware show. Please help me find out this pin out in MBP A1502(MBP12) early 2015.
@@patertmg no solution for my Mac, but I read in your cmmt that red light blink on your MBP , you can try match stick in headphone jack to remove headphone mode,may be it working for you.
@@kulvinder9899 Thanks, yes I tried that - and pretty much everything else written online... but sadly no change... So this idea of @Mani S intrigued me, but our motherboard (A1502) is different, so I have no idea which parts I would have to connect...
Thank you! I did find a computer with working sound. I was mostly amused by the fact that I needed sound, to fix the sound. Again, thanks for the video.
Norm Nelson push (Shift) (control) (alt/option) (power) all at the same time starting with shift and walllahhhh I read everything and did every trick in the book wasted tons of time read this and do it and save yourself the time I wasted for you
hi mani.. this is great but I can't get it to work on my.. does the port need to be removed? i've tried it with the connection on.. and removed it and still no dice..
Hi dude, thanks, great video! I have the same issue as this and by shortening those two points with a paper clip also solves the problem. What does this say about the headphone jack input hole itself? Can I do something in there to solve it? I am reluctant to solder myself
@@manimanus67 yeh sorry, I mean that because your method works, then what, if anything, does it suggest that is wrong inside of the hole? Is it the gold connectors?
@@jamesbailey4798 when I made the video, I was discovering the pin which would bring back the sound. After the video, I’ve tested other pins and the result was the same (working). If you want to solder two pins, try to find the nearest ones. I don’t know if that answers your question. If not, try with other words since my english is limited. Peace.
tamil enterprises push (Shift) (control) (alt/option) (power) all at the same time starting with shift and walllahhhh I read everything and did every trick in the book wasted tons of time read this and do it and save yourself the time I wasted for you
Hello Mani (or anyone else here): Do you know how to make this work on a Macbook Pro 13'' early 2015? Can send you a picture of my headphone jack - sadly integrated on the logic board - with its surrounding . Have the deadly red light sindrome, resulting in absolutely no audio on internal speakers (but also on plugged in headphones) ... no way to turn off "digital out"... 😱Thanks, help appreciated!
P. Thomas Gögele LC Hi Thomas, you could upload some pictures of the main board on to a free hosting site and post the link so me or someone else might help you if we have the knowledge.
@@manimanus67 Sorry didn't catch you answered this a year ago 😳Anyways I continue to have this problem: no sound, only digital audio output, red light in the jack... Here's the logicboard of my early 2015 MBP 13" (A1502): www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Early+2015+Logic+Board+Replacement/45134 Any clues which pins I would have to solder?
Thank you for replying so quickly. Simply put the headphones on and do nothing, ALWAYS keep the internal speakers working. I mean, it not only turns off the digital output, but also the headphones. Could it be another pin that disables the digital output? Yes, I have reset SMC and NVRAM. Thank you.
First you should undo the manipulation than try playing with the headphone plug in and out many times to see if the sound comes back. It could be dust or the plug could be damaged. If damaged than just buy something like that www.amazon.com/gp/aw/d/B00OJ5AV8I/ref=mp_s_a_1_5?ie=UTF8&qid=1501276748&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=usb+headphone+adapter&dpPl=1&dpID=51R6KUNYcTL&ref=plSrch
Thank you, I have removed everything, and the headphones come back to work, but I still have the digital output when I remove them. I will look to clean the connector. Thank you very much for the help. Greetings from Barcelona.
Michael Maluenga sorry but I never had any troubles with my IMac, so I never got the opportunity to look for it. Maybe someone else will be able to help you.
Even simpler solution would be to insert a jack plug into the socket (and cut it flush with the enclosure) and then select 'Use audio port for - Sound Input' in the audio preferences. No skills required.
Hello. Can anyone tell me what are these smd resistors for? accidentally I broke one of them (middle one) :(( photo: i68.tinypic.com/116tdw1.png This is macbook pro 13" 2012 middle (A1278)
It is nice to see one video out 50 where someone understands that this common issue is hardware related rather than software related. Thanks for making it. For those who are reading this comment, the issue is probably due simply to some dust and dirt between the contacts of the jack port, rather than those of the speakers. In the case of the retina 2012 for example, those contacts are under the little internal cable of the jack. So you need to take out the bottom cover of the macbook, unplug the cable of the jack, clean with alcol 96% its soldered contacts, which are just below, you can only see them after you unplug the cable, and in 5 minutes the issue will likely be solved.
Thanks for specifying certain details that I have not done
I don’t normally comment on video posts but I have been trying to figure out why my computer all of a sudden had no sound, and why my internal speaker wasn’t showing in my settings this video was heaven sent thank you so much! The only video that had useful information for me and this situation. I just messed with my headphone jack and got it to come back on! I never would have thought of it again thank you 😁
That is the only method that worked for me, and now that apple do not give support for "vintage" products, It's was almost impossible to find someone that could resolve this problem. Thank you very much!
Sir You are truly a life Saver and the best. GOD BLESS YOU REAL GOOD. YOU ARE TRULY GIFTED
FAGBOHUN OLUWATAYO you’re welcome.
you are a f.... hero! I noticed that the pins that are together, are only for the right speaker. Maybe you have to solder all together to make both work
Thank you so much for sharing your experience
You are my HERO !!!!. This was driving me crazy. Instead of using a jumper wire, I actually just soldered the two pins that were next t each other and Voila !!!
Coach NH glad it worked for you. I ‘ve realize at the very end of the video that the two pin were working as well.
I really wanted to thank you man. i just soldered the pins and it really worked. it is unbelievable that the fix is so simple. you should go the the heaven if there is.
What kind of wires did you use?
@@filmonkidane2283 they were just simple wires that i use for almost any iot projects.
Peki bunu yapınca kilaklık jacinden ses alabiliyormiyuz yoksa sadece speakerdenmi?
@@xelerator2398 kulaklik jackinden alamiyorsun artik sadece speakerdan
Thanks! Worked for my Mid 2012 13" MacBook pro. Just solder the 2 pins next to each other thats closest to the battery.
And 15 inch too
Thank you sir... I have fix my jack issue by soldering that you told on your video... Again... Thank a lot sir...
Alief Faisal glad it did help you
Hey man you are an angel. I been searching for possible solution because i have some issue. And then ive watch your video and it worked! I wish i could you beer man! Thanks a lot!
Bryan Perera glad you got your audio back
This is 2024 and this video help me. Thanks man
Glad it did 👍🏼
la mejor solucion que encontre!!! me salvaste la vida!!!
I was very pessimistic that this would solve my problem, but it did! Thank you so much!
I must add, it only works for me connecting it by hand, and even then it's very hard. I didn't succeed soldering them together...
@@slinkos I just soldered mine and it worked fine.
God bless you man! This is the most helpful video I have ever watched on RUclips!
Mine has started working. Thanks to you.
thank u!! I didnt have a broken jack, but those 2 leads seem like a switch between speaker/jack. my speakers now work
Love finding videos from random people it makes me so happy that there are intelligent people!! I know I sound stupid lmao but 4real; u give me hope for humanity. That said! lol I wonder if u could help me 🙈 my audio/sound stopped working after it fell off the bed 😶 it also sometimes goes through periods of me having to "tap" the bottom of it and hoping if comes on >.>
Any ideas? ^_^ atm I'm gonna go try what you did for your issue...except the soldering lol but I will be messing with the sound ... " thing " ... u r awesome !
Noctem Aeternam thx, i appreciate.
You said that when you knock under the mac the sound is coming back or you're hoping it will ?
ITS WORKS GUYS
THANKS BRO🤩
You’re a genius my friend!!
Thank you man. i soldered a jumper wire and it works great!
Before trying this extreme approach, try spraying some screen cleaner liquid or foam onto the 3.5mm jack and keep plugging and unplugging into the Mac headphone jack. TURN OFF THE LAPTOP FIRST. This worked for me in 2mins and is far less intrusive.
excellent , working great on mid 2012
Nice the only way that works thanks lan
Happy to help
perfectly in mac mid 2012 motherboard 820-3115,,very thanks
Thank u so much, u should make more videos!!
Excellent...this worked for me! Thank you very much.
Solution radicale mais qui fonctionne ! Merci beaucoup !
+The Gnomish Arcanum c'est la solution du désespoir mais la seule qui était fonctionnel pour moi.
Cool que que ça ai pu t'aider.
THANKS A LOT BUDDY!!!!! FROM CUBA
Thank u so much it worked I thought I broke it and I was gonna die lol 😂
I’m glad it could help you.
it works I will solder a wire to the two connections thanks for the video
J.A. Nickrand welcome
Thanks !that worked! i ended up putting foil papel making contact to those 2 component and put a bit of hard glue or crazy glue so it would stay in place then on top i added tape to make sure it would stay in place. worked like a charm! thanks
fronze vere you put glue on top of the two dots?
thanks man, it worked for me
Good. macbook 2012 15 inch
what's the cost of getting it repaired?
Great works here as well! But Would the headphone would still be working after? Or would it be forced to the speaker all the time?
In my A1502 13" MBP no sound problem auto occurring without connecting headphones. i tried all type SW troubleshooting and finally installed Windows 10 on MBP but problem remains same. in windows device manager no sound hardware show. Please help me find out this pin out in MBP A1502(MBP12) early 2015.
I have the same problem (see one message above) - if you find a solution, please let me know
@@patertmg no solution for my Mac, but I read in your cmmt that red light blink on your MBP , you can try match stick in headphone jack to remove headphone mode,may be it working for you.
@@kulvinder9899 Thanks, yes I tried that - and pretty much everything else written online... but sadly no change... So this idea of @Mani S intrigued me, but our motherboard (A1502) is different, so I have no idea which parts I would have to connect...
Thank you just fixed a old macbook
Pat K glad it could help.
If only I could hear the audio on this vid ... I'm sure it'd help! Hah ok got to go find another computer
to make it short, you'll have to make a bridge between two side by side existing solder to trigger the sound back.
watch the end it will be easier
Thank you! I did find a computer with working sound. I was mostly amused by the fact that I needed sound, to fix the sound. Again, thanks for the video.
What is a solder and where can i find it please ?
Norm Nelson push (Shift) (control) (alt/option) (power) all at the same time starting with shift and walllahhhh I read everything and did every trick in the book wasted tons of time read this and do it and save yourself the time I wasted for you
Боже мой, спасибо за этот совет, я чуть в окно не выпрыгнул ❤️
hi mani.. this is great but I can't get it to work on my.. does the port need to be removed? i've tried it with the connection on.. and removed it and still no dice..
Does this work also on a macbook air 2016 model?
Thank you sir!
Martinoffi you’re welcome
Thank you thank you thank you !!!!!
hello and for macbook pro 15 inch 2011 ? please
Hero
Bhi ap kahan sy hain
Hi dude, thanks, great video!
I have the same issue as this and by shortening those two points with a paper clip also solves the problem.
What does this say about the headphone jack input hole itself? Can I do something in there to solve it? I am reluctant to solder myself
Hi , thanks for your feedback. I didn’t get the question about "the jack input hole itself". If you could clarify this, i’ll be glad to answer.
@@manimanus67 yeh sorry, I mean that because your method works, then what, if anything, does it suggest that is wrong inside of the hole? Is it the gold connectors?
@@jamesbailey4798 when I made the video, I was discovering the pin which would bring back the sound. After the video, I’ve tested other pins and the result was the same (working). If you want to solder two pins, try to find the nearest ones.
I don’t know if that answers your question.
If not, try with other words since my english is limited.
Peace.
@@jamesbailey4798 on the MacBook itself it will be display as normal speaker outputs
i have the same problem for macbook air
could you please help
tamil enterprises push (Shift) (control) (alt/option) (power) all at the same time starting with shift and walllahhhh I read everything and did every trick in the book wasted tons of time read this and do it and save yourself the time I wasted for you
will this work on a Late 2013 Macbook Pro?
same question, have you tried wireless speakers?
Hello Mani (or anyone else here): Do you know how to make this work on a Macbook Pro 13'' early 2015? Can send you a picture of my headphone jack - sadly integrated on the logic board - with its surrounding . Have the deadly red light sindrome, resulting in absolutely no audio on internal speakers (but also on plugged in headphones) ... no way to turn off "digital out"... 😱Thanks, help appreciated!
P. Thomas Gögele LC
Hi Thomas, you could upload some pictures of the main board on to a free hosting site and post the link so me or someone else might help you if we have the knowledge.
@@manimanus67 Sorry didn't catch you answered this a year ago 😳Anyways I continue to have this problem: no sound, only digital audio output, red light in the jack... Here's the logicboard of my early 2015 MBP 13" (A1502): www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Early+2015+Logic+Board+Replacement/45134
Any clues which pins I would have to solder?
I've soldered the dots, the speakers work, but ignores the headphones.
Do you have any information?
Thank you.
Francesc Calle have you plugged and unplugged the headphones many times or reinitialized the Nvram before applying this method ?
Thank you for replying so quickly.
Simply put the headphones on and do nothing, ALWAYS keep the internal speakers working. I mean, it not only turns off the digital output, but also the headphones.
Could it be another pin that disables the digital output?
Yes, I have reset SMC and NVRAM.
Thank you.
First you should undo the manipulation than try playing with the headphone plug in and out many times to see if the sound comes back. It could be dust or the plug could be damaged. If damaged than just buy something like that www.amazon.com/gp/aw/d/B00OJ5AV8I/ref=mp_s_a_1_5?ie=UTF8&qid=1501276748&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=usb+headphone+adapter&dpPl=1&dpID=51R6KUNYcTL&ref=plSrch
Thank you,
I have removed everything, and the headphones come back to work, but I still have the digital output when I remove them.
I will look to clean the connector.
Thank you very much for the help.
Greetings from Barcelona.
How do i solder the dots??
do you know where is this located on a imac 2012?
Michael Maluenga sorry but I never had any troubles with my IMac, so I never got the opportunity to look for it. Maybe someone else will be able to help you.
@@manimanus67 thanks!
Does it still work after three years? How are you allowed to do that connection, and why isn't it damaging to the MacBook?
AssassinatorDK by soldering, you are tricking the audio card which will act as if there is no jack inside.
Even simpler solution would be to insert a jack plug into the socket (and cut it flush with the enclosure) and then select 'Use audio port for - Sound Input' in the audio preferences.
No skills required.
Damian De i had the audio jack plug broken inside and wouldn’t move.
Hello. Can anyone tell me what are these smd resistors for? accidentally I broke one of them (middle one) :((
photo: i68.tinypic.com/116tdw1.png
This is macbook pro 13" 2012 middle (A1278)
*Stay bless forever 24.7web God never let honest man down*
asdf
jlarisch123 could you please translate ?