Use it too. I stopped even spraying it anymore. I use an eyedropper to drip it on, a wide, flat, soft brush to spread it around, and put it on pretty heavy over a good ten minutes, building it up as it dries and levels. Gives an amazing result. The clear windows I just dip into a bowl of it. Not a show quality shine, but a great, easy, simple, inexpensive way to gloss your average build you're not going to show with. Maybe best of all, the air extractor isn't even needed.
Hi Doc. just found and subscribed to your videos. A quick FYI: to remove Future; Wendix will strip it off even after it has dried. Now even though I'm a plane guy, I can dig your car culture, so the temptation is rising Stay well
Hi doc..I am new to modelling and I have watch your video on spraying pledge multysurface wax is made by klear hope you can help I have a airbrush to or should I use a brush not sure will it bust my airbrush.. Pete.
Doc. As always great tips. Love your tutorials. I find my self watching your videos instead of building most of the time lol... Now I gotta try future again. Stuff never works for me...
great video and just in time too for my Richard Petty 69 Torino, I'm jut getting ready to put the decals on. quick question what do you use to hold the parts on the sticks for painting
Hi doc, how are you? Here in my country we don't have Future or any other product with the same formula. Do you think that regular liquid floor polish can work as well? Tks
Doc, Great vids as always, but two questions, first what do you clean the future out of the airbrush with? Second whats the purpose of the white papers in your paint booth?
A little Windex helps the Future flow much better especially in a dry climate. I ALWAYS clear the decals, helps level everything level out and protects them in the weathering process.
Doc, I wasn't aware you had a series of clinic videos. That's awesome! I learned more in the 11 minutes of these two videos than I have watching a dozen other videos. I can't wait to see the decals. Is this what you're using the Stuka kit for? Is the Iwata M2 your main airbrush?
Ok, thanks for your response. I also like to say I really enjoy your video's, you're helping a lot of people and it matters a great deal to us modelers. I know it's a lot of work to do a video so I thank you for your time and effort to help us fellow modelers make better models, it's greatly appreciated...thanks again -Rick
cool! i like your hobby and i will customize my "little rides" soon too! you are my mentor! but i have lots of 1:43 models and 2,3 over 1:25 ! but ill buy more! keep up the good work!
hi thanks for the video. i have a question will the future damage my airbrush? someone told me not to use it because it might damage mt airbrush.. i dont know what to believe
cool it looks bigger than any others i seen that is why i asked thanks another ? i have a diecast model i want to strip and repaint what would be a good striper that i can also use on my plastic models ?
Nobody ever talks about how we get the hood to fit right after 2 or 3 coats of primer and 2 o r3 coats of paint then possible 2 or 3 coats of clearcoat. What's the secret? The Mac attack
Use it too. I stopped even spraying it anymore. I use an eyedropper to drip it on, a wide, flat, soft brush to spread it around, and put it on pretty heavy over a good ten minutes, building it up as it dries and levels. Gives an amazing result. The clear windows I just dip into a bowl of it. Not a show quality shine, but a great, easy, simple, inexpensive way to gloss your average build you're not going to show with. Maybe best of all, the air extractor isn't even needed.
Hi Doc. just found and subscribed to your videos.
A quick FYI: to remove Future; Wendix will strip it off even after it has dried.
Now even though I'm a plane guy, I can dig your car culture, so the temptation is rising
Stay well
Kranky, what are you using to attach the stick to the hood? As well what size tip are you using in the airbrush?
I've been using the Pledge for awhile now, works great.
Awesome! what a difference airbrushing future makes. Even though it does look good brushing it on, the airbrush makes a huge difference
I keep hearing folks talk about future clear but where do you get it? Who makes it?
Great stuff, its self leveling even with a brush. What kind of compressor are you using?
Hi doc..I am new to modelling and I have watch your video on spraying pledge multysurface wax is made by klear hope you can help I have a airbrush to or should I use a brush not sure will it bust my airbrush.. Pete.
Doc. As always great tips. Love your tutorials. I find my self watching your videos instead of building most of the time lol... Now I gotta try future again. Stuff never works for me...
Do you put the clear coat on after the wet sanding and novus polish process ? New to this thanks
great vid Doc!!! i can't wait to see the finished product!!
great video and just in time too for my Richard Petty 69 Torino, I'm jut getting ready to put the decals on. quick question what do you use to hold the parts on the sticks for painting
Hi doc, how are you? Here in my country we don't have Future or any other product with the same formula.
Do you think that regular liquid floor polish can work as well? Tks
Doc, did you say clear coat the future then decal the car? Do you do second coat over decals? Or?
Doc, Great vids as always, but two questions, first what do you clean the future out of the airbrush with? Second whats the purpose of the white papers in your paint booth?
After you spray the model with Future, do you still apply your decal setting solution? Thank you and great video!
You can if you want to, but allow the future to dry really well.
+Doctor Cranky's Lab-RAT-ory Thank's!
10 psi... thanks DC going to give this a try......after I watch part 2
A little Windex helps the Future flow much better especially in a dry climate. I ALWAYS clear the decals, helps level everything level out and protects them in the weathering process.
Great Video sir....I really enjoy all Videos.
great vid.. is this the only clear? or is this after a diff. clearcoat?
Can you use future on acrylic paints
what is Future clear? is it Future floor product?
Doc, I wasn't aware you had a series of clinic videos. That's awesome! I learned more in the 11 minutes of these two videos than I have watching a dozen other videos. I can't wait to see the decals. Is this what you're using the Stuka kit for? Is the Iwata M2 your main airbrush?
what do u use to hold ut parts while painting
amazing
+Doctor Cranky's lab-rat-ory is pledge coating good for oil wash? I mean before the oil wash
Yes it is.
+Doctor Cranky's Lab-RAT-ory Thanks
Does the future have build up, can I still do my line panels after?
Nice job on that, FUTURE rules !!! and Nice A.B.
Great info!!
Hi I sent a money for the purchase of your book. Just wondering if it got there and if book is on it's on the way?
Arthur Crow
Arthur Crow Arthur, you book is headed your way. Please let us know when it arrives. Again, thank you so much for the generous support. Best, DC
Great video going to watch part2 now.
Hey dude, good video. Where are you getting your plastic bottles?
On the web. Look up plastic containers/bottles.
Hi Doc, I was wondering if using future will cause any harm to the airbrush.
wraith20072007 None whatsoever but you want to rinse the brush really well with water and or window washing liquid.
Ok, thanks for your response. I also like to say I really enjoy your video's, you're helping a lot of people and it matters a great deal to us modelers. I know it's a lot of work to do a video so I thank you for your time and effort to help us fellow modelers make better models, it's greatly appreciated...thanks again -Rick
Thanks Doc! I think I was spraying with too much PSI
Can I use pledge floor care multi surface finish?This was the only stuff I could find locally.Is it different from the pledge future?
If it is the one with the blue boots picture yes, it's the same
COULD YOU AD POLLYUAERTHANE TO THE FUTURE FLOOR WAX????????????? THANKS
Thanks doc i neede this clinic today.
Dont you have to thin it, just straight out of the bottle ?
Out the jar
i will try to remember... thanks
cool! i like your hobby and i will customize my "little rides" soon too! you are my mentor! but i have lots of 1:43 models and 2,3 over 1:25 ! but ill buy more! keep up the good work!
I want to know what do you use to clean your airbrush after using Future?
I use my regular method which is to break down the AB and put it into a solution of half window cleaner half water in a sonic wave jewelry cleaner.
thanx Doc!
hi thanks for the video. i have a question will the future damage my airbrush? someone told me not to use it because it might damage mt airbrush.. i dont know what to believe
What kind of airbrush do you have? I use future clear all the time and it's never damaged my Iwatas or my Paasche airbrushes.
like.
awesome video, thanks for sharing the technique. cheers
DR.CRANKY HOW DID U MAKE YOUR SPRAY BOOTH ?????
Charles, you can buy this unit on Amazon. It comes with everything you need in a box. Easy to assemble and set up.
cool it looks bigger than any others i seen that is why i asked thanks
another ? i have a diecast model i want to strip and repaint what would be a good striper that i can also use on my plastic models ?
Nobody ever talks about how we get the hood to fit right after 2 or 3 coats of primer and 2 o r3 coats of paint then possible 2 or 3 coats of clearcoat. What's the secret? The Mac attack
The secret is to sand it in the raw styrene until it fits a little loose. Then it will fit just right with primer and paint.
Please make more hands on making videos.
Future Clear is discontinued, Pledge with "future" is the replacement
It is now called Pledge Revive It.