AJS Modena 125 exhaust removal to access rear wheel video 8

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 10

  • @euph0ria376
    @euph0ria376 2 года назад

    Your videos are so helpful thank you, nowhere near me will fix my bike so I will do it myself and get its mot done because that’s all they can do :(

    • @modena_man
      @modena_man  2 года назад

      Hi. Glad you find the videos useful. It’s likely my next video will be changing the oil on my scoot.

  • @roorozco4517
    @roorozco4517 Год назад

    A bro when I took off the stock exhaust , the two bolts on the side by the wheel, one bolt is longer than the other which spot does the longer bolt go in on the top or bottom hole, I smoked a couple bowls of some herb and I didn’t pay attention which bolt goes where? Appreciate the response brother thanks a whole bunch 👌😉👍🛵🏍️🎱💣💯💯

  • @user-ge7tr6hp2d
    @user-ge7tr6hp2d Год назад

    HI how do i get video of side panels removal .

    • @modena_man
      @modena_man  Год назад

      Hi there. It’s on this video. ruclips.net/video/6Zl5j7AkEtQ/видео.html

  • @connect4glyn
    @connect4glyn 2 года назад

    Great video but I cannot get the real wheel off to change the tyre

    • @modena_man
      @modena_man  2 года назад +1

      Hi. Have you let the rear tyre down? It's still a struggle with the tyre flat as you have to man handle it and push it in in some places.

    • @connect4glyn
      @connect4glyn 2 года назад

      @@modena_man yes but the wheel is stuck on the spline

    • @modena_man
      @modena_man  2 года назад +1

      @@connect4glyn Ah. In that case you would need to obtain a puller from somewhere. if you have removed the retaining nut and the bracket which it holds on and the wheel will not move then the only thing you can do is get a puller on the job. Either buy, borrow or make one.

    • @connect4glyn
      @connect4glyn 2 года назад

      @@modena_man Thanks , I've put it all back together now and will let the shop do it , I can't even see where you a puller would be attached to