10:10 Ahhhh! So that is how to do the decal panel line! And it is so simple. I have seen the light An X-acto knife instead of a toothpick. LET THE DECALS DRY before cutting. After, hit it with softening solution. You are a god. ;-)
Bonjour très beau travail comme d'habitude, je vous suis depuis longtemps ,même si je ne parle pas anglais, en regarder vos vidéos j'apprends beaucoup . Merci beaucoup
Great job as usual. Do you clean the body with anything before clear coat? After the decal solution dries I sometimes see water marks or some other imperfection on my projects. I wipe the body with water and dry it before adding clear coat, not sure if I need to be doing that.
Good afternoon, got a question for you. I recently started building plastic model cars again after several years of not doing it. Please remind me how long do I typically wait before wet sanding clear coat if orange peel developed? Love the vids, keep em coming!
Awesome paint job ! What is the difference between Tamiya “fine” surface primer spray and the Tamiya surface primer spray ???? Anyone, please .. thank you !
Amazing work... I want to do same 😁 Sorry for stupid question but do you think we can make same process on PLA 3d print body's ? I think yes but make need more polish first isn't it?
I heard just heard i never answer questions.. so lets answer this one. You can do the same to a pla 3d printed body. But that needs a lot more prep work to get rid of all the 3d printing layer lines
Hello. I have a couple of questions. I use a can of Mr topcoat gloss to clear coat my models and I always see people sanding their clear coats with 3000+ grit sand paper and using tamiya or meguiars compounds. 1. Can I sand Mr topcoat and should I go about doing that. 2. Do I need to use a compound like meguiars after sanding
1. You can sand clearcoat if you want to create a smoother finish. 2. You can use that brand, but there are also many other polishing compound brands that can be used
When you spray with the air brush you constantly hold the trigger down for air to come out? Cuz when I paint I pull it back then release and when start again it spits paint on the body
if you are using a double action airbrush it's best practice to constantly hold the air on and will stop the spattering, as the needle move back and fourth is how the paint flows through the gun, hope that help you out. best way i learned how to control better was doing constant practice of "basic" techniques lines-dots-dagger strokes it improves control so much. i brought myself a cheep A3 certificate frame and drew out a practice sheet that was visible through the glass off the frame that way i could just wipe the paint off the glass and go again quickly
@@TheScalemodelingChannel Ahhh ok got it ! Not only are you an excellent modeler but you have good taste in music as well. Thank you, looking forward to more of your video tutorials. 😎🤙
I am impressed. Been modeling 50 year's and your close to the top level! Good job! Carry on!
It is absolutely beautiful, i have the same model...just want to paint right away, really stunning work
Love how you explain everything in detail.👌👌👌
A lot of people could learn a thing or 2 from you on how videos should be narrated.
My gosh, a masterpiece. Well done and great video!!!!
Great work with the airbrush. Nice colour
This is frigging gorgeous. I can only hope mine turns out a quarter as nice.
There was no video that explains how to paint Mini-Z body in detail... Thank you for your upload!
I have these Tomica cars for now, that color looks nice, my favorite car.
And btw, that gold looks amazing!!👍
nice work, you make viewing a pleasure watching these videos, hope you have more coming!
Oups just realized he never answer question... So nice work 👍
Whut……
@@TheScalemodelingChannel Thank, its just because i look all questions posted and i no see answer, not my intention to be rude ;)
Excelente video y resultado de esta Pintura personalizada a Un Subaru Impreza WRX STI Mini Z de Kyosho, mis respetos y saludos desde Venezuela.
This makes me really want to make a gold car! Nice work.
Simply brilliant video!! Thank you very much for all of the info too.
Another beautiful paint job bro...
10:10 Ahhhh! So that is how to do the decal panel line! And it is so simple. I have seen the light An X-acto knife instead of a toothpick. LET THE DECALS DRY before cutting. After, hit it with softening solution. You are a god. ;-)
Bonjour très beau travail comme d'habitude, je vous suis depuis longtemps ,même si je ne parle pas anglais, en regarder vos vidéos j'apprends beaucoup .
Merci beaucoup
Love this works for rc cars
Great clean job , way to do it !! Bravo
Great video scale modeling
Lucky friend
Great work! What psi did u use for spraying clear coat and what nozzle/needle size airbrush do u use ? Thank you once again!!
0.3 needle
29 psi
Beautiful
Very nice!!
Probe the darkest depths of your soul and imagine the worst nightmare. Thats about what happened when I tried to do carbon fibre that size :(
Great job as usual. Do you clean the body with anything before clear coat? After the decal solution dries I sometimes see water marks or some other imperfection on my projects. I wipe the body with water and dry it before adding clear coat, not sure if I need to be doing that.
Yes. Sometimes with a damp microfiber towel
Sweet!
Nice job! Have you tried any automotive 2K clear coat as the Zero paints stuff works out pretty expensive?
Zero paints is automotive clear but then in smalles packaging
Good afternoon, got a question for you. I recently started building plastic model cars again after several years of not doing it. Please remind me how long do I typically wait before wet sanding clear coat if orange peel developed? Love the vids, keep em coming!
Jorge Anzar greatly depends on what type of paint it is and how thick. To be safe, 1 week (excluding enamel paint )
Awesome paint job ! What is the difference between Tamiya “fine” surface primer spray and the Tamiya surface primer spray ???? Anyone, please .. thank you !
I don’t think there is a difference
Hola una pregunta el aerógrafo cuando terminas de pintar, con que liquido lo limpias...? hace mucho tiempo que voy siguiendo y sos el mejor pintando.
So for a “mist coat” first coat, should I keep a wet edge? Or just super light and not worry about that?
Don’t worry about that. The wet edge is for a thicker coat
Awesome !!!!!!!!!!!!!!!!!!
Pls make an Lexus lLFA
Magnifique 👍👍👍
Amazing work... I want to do same 😁
Sorry for stupid question but do you think we can make same process on PLA 3d print body's ? I think yes but make need more polish first isn't it?
I heard just heard i never answer questions.. so lets answer this one.
You can do the same to a pla 3d printed body. But that needs a lot more prep work to get rid of all the 3d printing layer lines
@@TheScalemodelingChannel Thanks for your time to answer ;) Amazing work, congrats
How much psi do i need on 0.3mm needle? When painting base coat? Thanks
29
Amazing, did you also spray the rear wing and mirrors? I hope he's not going to race the body but use it for drifting!
Indeed i did
Awesome! What was the mixing ratio for all coats? All sprayed at 14psi? 🤔 Perfect finish 👌
Same as on the package.
100% clear
50% hardner(if it is warm outside 40%)
5 to 10% thinner
Please build a widebody gt86 im building one and i need tips and help
excellent video are there carbon fiber decals for 1/43 scale cars? Or do they only come for 1/18 1/24 scale?
These are for 1:24
are you taking applications for mew friends? 😂
Hello. I have a couple of questions. I use a can of Mr topcoat gloss to clear coat my models and I always see people sanding their clear coats with 3000+ grit sand paper and using tamiya or meguiars compounds.
1. Can I sand Mr topcoat and should I go about doing that.
2. Do I need to use a compound like meguiars after sanding
1. You can sand clearcoat if you want to create a smoother finish.
2. You can use that brand, but there are also many other polishing compound brands that can be used
Nice 👍
Does anyone know where I can get z28 camaro wheels in 1/25th scale?
Check Out eBay parts lots n God Bless.
Great video! Did you apply panel line accent or does it naturally come out dark? Thanks.
I did
When you spray with the air brush you constantly hold the trigger down for air to come out?
Cuz when I paint I pull it back then release and when start again it spits paint on the body
if you are using a double action airbrush it's best practice to constantly hold the air on and will stop the spattering, as the needle move back and fourth is how the paint flows through the gun, hope that help you out. best way i learned how to control better was doing constant practice of "basic" techniques lines-dots-dagger strokes it improves control so much. i brought myself a cheep A3 certificate frame and drew out a practice sheet that was visible through the glass off the frame that way i could just wipe the paint off the glass and go again quickly
@@scottyturner88 thanks for the advice I will try paint and constantly press for air
How many cfm’s does your exhaust fan pull?
4 cubic meters/min or 141 cfm.
Do you have to thin the paints by zero paints
no
Are you using oil based acrylic paint?
I use laquers
I watched the funny and informative video well. You have a good hobby. Want to be a close friend.
우리 친구해요 🤩🤩🤩
Do you paint mini z bodies for customers?
that is possible sometimes
Beautiful...i would like so much to be one of your friends!!!!....(-:
What kind of carbon fiber do you use? What do you recommend for a 1/64 scale?
I use scalemotorsport or scaleproduction
One
Clip is not include?
Clip?
Is your decal wet?
Yes
Thanks!
What song is playing in the background?
Shown at the very beginning of the video. Lower left corner
@@TheScalemodelingChannel Ahhh ok got it ! Not only are you an excellent modeler but you have good taste in music as well. Thank you, looking forward to more of your video tutorials.
😎🤙
👏👏👏👏👏👏👏👏👏👏👏👏
Yeah, mines gonna look like 💩