What a trooper. Makes a video about something and then doesn't even use it! Thanks again Smeedia. Now I have knowledge for something I never thought I would ever try 🤙🏻
I’m looking to start a similar project for my 1973 Maverick. But I want to also have it light up the words F U but spelled out. Awesome to see and I need more research before I start. Thanks. I’ll be back for reference.
Love that you took the time to go through all of this and were honest about not really loving the final result. I don’t think they look too bad, especially since it was all diy, but I agree, a more OEM look just works better for a classic like this.
Maaaan i wish i could show pics in the comments 😅 i am currently building a set of 1 of 1 fb rx7 tails for a customer! The prototype went amazing!! I will be recording the build this weekend
Very solid guide. I'm not a fan of individual LEDs style either. I'd much rather have the diffused look, but that's also more modern than it sounds like you're going for.
I completely rewired my old SRT-4 in 2004 with blue LED's. I'm talking every bulb in the HVAC controls and dash. It looked so good, but was a pain. This is a good straightforward tutorial for noobs. I would have used red wire for the red and yellow wire for the yellows. Green or black for the ground is fine.
Amazing video!!! I dont care for that style. There are a few that look way better on the car. I personally prefer an led board over oem. But i am also very picky about car styling. Oem looks great on the right type of clean build. And this is definently one of those builds!
Thanks for the tutorial on building led lights! I've been thinking of doing this for a while on my old benzo because the tail lights output is weak. When you first mentioned to use a sharpie I thought you were going to say uh a pen preferably a sharpie it really doesn't matter the color um black blue green yellow purple silver cyan. But you didn't and I laughed anyways.
I do wonder if you would have liked the "c design" over the "ring design" for that outer bit to look a bit less light a viper. There's also the non-diffusion version too like what TJ Hunt has on his. However it's hard to beat the OG 99 spec which is what I did on my FD too.
I’ve seen the full board versions too and on some cars they look so good, maybe it’s just because the cars not fully done. I don’t have anything to compare them against yet
dead serious, learned more from you than anyone else on subies. even if its something i dont plan on doing myself. can atleast help my friends do stuff and seem like i know something lmao
Kudos on the diligent work, sir. Even if all for naught. I don't know if you're old enough to remember, but those boards look just like Lite-Brite, from back in the day. Honestly, I'm glad you're not going to use them. OE for the win. 👍🤘💯
A cheap Amazon soldering iron works but if you want an easy time with it 1000000% get a pinecil. They are around 20 dollars and run off of a DC barrel plug or USB C. Makes the job much easier with the adjustability.
I actually like those… but definitely something darker. Almost black in the light(with them off). That’s a detail that sets the car off… very critical that you get it right for yourself.
I have an F150. Can I use a programmable RGB or a single color strip and skip all of the soldering of LEDs and the resistors? I can create my inner panel like the one that came with the kit. They don't make a truck or Mitsubishi Mirage taillight kit. And if I could make it dim/flash that would be cool. Any help would be appreciated. Thanks for a great video.
At around 11 mins or so you cut the leds down and attach them to make the bridge and you say you connect one negative to one positove? Did you mean negative to negative and positive to positive or was that on purpose..? Just a little confused as ive daisy chained gauges together and i always connected all the grounds together and 12v powers together.
good video brought me back to my college days for electronics courses. if you were going to use those there is a Transistor that i was going to suggest that sets a delay for the Trun Signal that does a sequential animation for the lights. you would just put it inline at the power lead before it hits the Group of Lights and also connect it to ground. Black Bulls Raised on Yellow Grass Bring Very Good Wadges B B R O Y G B V G W.
That would have been a cool little addition to add into them. I saw some modules that work for the sequential stuff. Soldering into those boards is was more difficult than I thought it would be 😅
Sorry for the previous crappy drunk post I did last night LOL. Keep up the great helpful content for your peeps. You did mislead me about the engine swap though and I am still bitter about it..... Whatevs though, Ill get over it eventually. LOL
I spent today putting in what I thought was a good motor only to find out it's got rod knock from a blown turbo, tomorrow I get to find out where the oil consumption on my partially built motor is from. I swear I love subaru's too much sometimes
Yeah honestly they'd look better if there was some type of light diffuser keeping the amber together and red together. Kind of like the surrounding border. Looks weird on a mid 90's car
I’m honestly not used to too much rice but I think those tail lights actually make the RX7 seem to make it look like more of a new car. But if you are going for OEM+ like everyone else that has already done and is not original then regular tail lights are the way to go
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
What a trooper. Makes a video about something and then doesn't even use it!
Thanks again Smeedia. Now I have knowledge for something I never thought I would ever try 🤙🏻
Figured it would be. Waste to not at least get the video out to help others. Trying to find any good diy video on these is wild. Nothing out there 🥲
I’m looking to start a similar project for my 1973 Maverick. But I want to also have it light up the words F U but spelled out. Awesome to see and I need more research before I start. Thanks. I’ll be back for reference.
Love that you took the time to go through all of this and were honest about not really loving the final result. I don’t think they look too bad, especially since it was all diy, but I agree, a more OEM look just works better for a classic like this.
Coming in for the watch and +1 for Smeedia totally being a resource for me in rebuilding my Subaru. What a journey it’s been
Maaaan i wish i could show pics in the comments 😅 i am currently building a set of 1 of 1 fb rx7 tails for a customer! The prototype went amazing!! I will be recording the build this weekend
I’ll keep an eye out for that to pop
Up 👀🔥
Going back to your roots of building taillights and headlights!
Yesssssir, LEDs a bit different 😅
Thank you for this, I was considering building LED taillights for my FD myself in the future. Saving this for reference later for sure!
Anytime! There were no good videos walking through how to build these 😅
Very solid guide. I'm not a fan of individual LEDs style either. I'd much rather have the diffused look, but that's also more modern than it sounds like you're going for.
Little bit, maybe once the car gets more put together it might looks better with newer style tails 😅
Such a good tutorial. I thought the same when looking at the illumasethic videos
I really appreciate this viddy. Pushing me over the edge of doing my fxt lights.
That’s a bummer you didn’t like the leds. I can confirm, I personally enjoyed the hell outta this video! Thank you homie. 🤙🏼
I completely rewired my old SRT-4 in 2004 with blue LED's. I'm talking every bulb in the HVAC controls and dash. It looked so good, but was a pain. This is a good straightforward tutorial for noobs. I would have used red wire for the red and yellow wire for the yellows. Green or black for the ground is fine.
Hoping it helps anyone who’s doing this for the first time. Definitely a small learning curve with this 😅
@@Smeedia You did great! I wish I had a helpful resource back in those days.
Amazing video!!! I dont care for that style. There are a few that look way better on the car. I personally prefer an led board over oem. But i am also very picky about car styling. Oem looks great on the right type of clean build. And this is definently one of those builds!
Totally agree, factory 99 spec tails are the move for this thing 🔥 the LED board looked too modern 😅
Thanks for the tutorial on building led lights! I've been thinking of doing this for a while on my old benzo because the tail lights output is weak.
When you first mentioned to use a sharpie I thought you were going to say uh a pen preferably a sharpie it really doesn't matter the color um black blue green yellow purple silver cyan. But you didn't and I laughed anyways.
I do wonder if you would have liked the "c design" over the "ring design" for that outer bit to look a bit less light a viper. There's also the non-diffusion version too like what TJ Hunt has on his. However it's hard to beat the OG 99 spec which is what I did on my FD too.
I’ve seen the full board versions too and on some cars they look so good, maybe it’s just because the cars not fully done. I don’t have anything to compare them against yet
dead serious, learned more from you than anyone else on subies. even if its something i dont plan on doing myself. can atleast help my friends do stuff and seem like i know something lmao
Glad that I can be of assistance 🫡🥳 never know, I never planned on doing this until now 😅
Great tutorial, I’ve been wanting to make infinity taillights out of some stock 1st gen BRZ taillights I have sitting around.
Spun a bearing today ( rod knock after getting on the car)
so atleast I get a Smeedia vid to be happy about and it's one I'm interested in ❤❤
Keep me posted on what Subaru says 😮💨🙏
@@Smeedia they open soon and imma call and have the car towed up. Hope they take my warranty or imma be scrounging 😅😂
Kudos on the diligent work, sir. Even if all for naught. I don't know if you're old enough to remember, but those boards look just like Lite-Brite, from back in the day. Honestly, I'm glad you're not going to use them. OE for the win. 👍🤘💯
lol my grandparents had a lite brite, I thought the same thing 😂😅
Tail lights are pretty groovy. Nice job.
Thank you 🙏🫡 they look great but too modern looking for the car 😅
A cheap Amazon soldering iron works but if you want an easy time with it 1000000% get a pinecil. They are around 20 dollars and run off of a DC barrel plug or USB C. Makes the job much easier with the adjustability.
Curious about this magical device now 😅
Please please please keep these on the car! They look amazing🔥🔥🔥
I might build a diff set but these ain’t it 😅
They look horrible lol. The leds aren't even consistently spaced and look ghetto. So glad he's not using them
@@heftygainz lol I didn’t think they looked that bad tbh. But honestly once he said someone called them dodge viper tail lights. I couldn’t unsee it😂
Professor smeedia and class in session, always a great day went I see a new upload
🫡🫡🫡
@@Smeedia appreciate the reply 🤙🏼
I actually like those… but definitely something darker. Almost black in the light(with them off). That’s a detail that sets the car off… very critical that you get it right for yourself.
Definitely needs something else, I like these but not feeling em😅
been wanting to do this myself on my z.. Good stuff!
Hope it helps 🥳
@@Smeedia unfortunately no DIY kits for the Z32 chassis.. So it's going to turn into some heavy DIY stuff lol
i dont know how much that light set set you back but that RX7 deserves something much better looking n finished look
Yeah, I got a flashback to you making $$ off custom headlights back in the earlier days. Miss the old garage, too
Used to knock those headlights out daily 😅
What are your thoughts on the Katana V1 LED Tail Lights?
I low key like those, but I gotta see em in person 😅
I have an F150. Can I use a programmable RGB or a single color strip and skip all of the soldering of LEDs and the resistors? I can create my inner panel like the one that came with the kit. They don't make a truck or Mitsubishi Mirage taillight kit. And if I could make it dim/flash that would be cool. Any help would be appreciated. Thanks for a great video.
Have you looked into infinity tail lights? Honestly the one you built don't look bad but they are a little bit dim keep up the good work dude
Totally agree, the infinity lights look super good on certain cars 🚗
that is going to look sick on the rx7, is it going to be the switchback kind for blinkers, or just normal like my car which uses amber for blinkers?
These just had normal blinkers, can definitely wire up switchbacks though 🙌
How do I make that panel with he LED holes I’m looking at this for a different car different shape light
At around 11 mins or so you cut the leds down and attach them to make the bridge and you say you connect one negative to one positove? Did you mean negative to negative and positive to positive or was that on purpose..? Just a little confused as ive daisy chained gauges together and i always connected all the grounds together and 12v powers together.
good video brought me back to my college days for electronics courses. if you were going to use those there is a Transistor that i was going to suggest that sets a delay for the Trun Signal that does a sequential animation for the lights. you would just put it inline at the power lead before it hits the Group of Lights and also connect it to ground.
Black Bulls Raised on Yellow Grass Bring Very Good Wadges B B R O Y G B V G W.
That would have been a cool little addition to add into them. I saw some modules that work for the sequential stuff. Soldering into those boards is was more difficult than I thought it would be 😅
I work at an electronics company .. seems like this could be made up with surface mount LEDs much easier
Definitely would have made it easier 😅
I'm liking this👍🏽
🫡🫡🫡🫡
Tanner really raid “nah I’ll make my own I ain’t paying a stack for tails.”
I refuse to pay thousands for them 😅
Dang! you shouldve bought the sequential module as well, so that your signals can have a trailing effect and what
@9:50 it looked like the cathode went into your finger 😱
Magic!
I had to watch it again and I still almost fainted 😵💫
Trying to figure out how to add led to my bike pedals
I have a car that no one is ever going to make a DIY kit for, so how would I go about getting the template with the holes in it?
What hi can t says bros ,u no what u doing man keep going 🤷🏾♂️🤷🏾♂️🫡🫡 great job🎉
What is the wattage rating on the resistors?
Sorry for the previous crappy drunk post I did last night LOL. Keep up the great helpful content for your peeps. You did mislead me about the engine swap though and I am still bitter about it..... Whatevs though, Ill get over it eventually. LOL
Hey Tanner, when are the dad hats coming back? I need a new one. Also, any giveaway's planned? lol
After the RX7 series I have a drop coming with a built engine give away 🫡
hear me out. imagine a whole light bar. they made it look as one, attached to break light might as well make it a function. i think it will look great
That might make it look a bit more cohesive 👀
Where do you get the white boards from?
When are we seeing more of the 2J 😩
After the FD, don’t have space to have two projects happening at once 🙏
I like it. Looks good.
They don’t look bad but they definitely don’t fit the era of the car 😅
@@Smeedia true but id leave them on and do a side by side comparison and have a vote.
How thick is the board?
I spent today putting in what I thought was a good motor only to find out it's got rod knock from a blown turbo, tomorrow I get to find out where the oil consumption on my partially built motor is from. I swear I love subaru's too much sometimes
When is the Subaru 2jz engine build videos coming? 😁
Yeah honestly they'd look better if there was some type of light diffuser keeping the amber together and red together. Kind of like the surrounding border. Looks weird on a mid 90's car
Agreed, if the LEDs had some diffusion I think they’d look a lot more fluid 😮💨
That’s badass!!!!!
😎👍🏻👍🏻
I’m honestly not used to too much rice but I think those tail lights actually make the RX7 seem to make it look like more of a new car. But if you are going for OEM+ like everyone else that has already done and is not original then regular tail lights are the way to go
They have full LED Boards which I think might look better. But that diffuser ring just looks tacky to me 😅
If it looks better than the OEM ones then that’s cool. The stock ones are boring especially if it’s going to be a SEMA car
Great how to.
Hear me out.. what if I just send you some that I want to do and pay you..? I really want some Hawkeye custom taillights
I can build you a set 👌
Would i be able to pay you to make mine?
I think they look good , but do what you feel is best for the build
So dope
I like the taillights. Just my opinion no hate.
They don’t look bad but they look kinda cheap 🥲
Ah, they do look like Viper tail lights haha!
I can’t unsee it 😅
@@Smeedia they already look similar too haha
Wow so its just a cnc cut piece of white acrylic painted black in a pattern with some leds and they charge $300 for it
Do headlights now please
Make 1981 Trans Am Tailights
You wanna know what would’ve been so much easier and so much better looking and fitting of the car, some 99 spec tails…
I don't think I have ever seen these DIY style lights ever look good. They always just look cheap and tacky to me compared to OEM.
pless
Looks like Christmas tree lights😂😂. Just me sorry
It’s a lite bright 😂
@@SmeediaTHATS IT!!! Nostalgia 100%
So glad you didn’t go with those. Never liked them. 99 spec is definitely the way to go!
Too much effort tbh lol 😂
Thay looks so tacky and cheap 😢
I thought the same, they reminded me of cheap spec D tail lights