When I replace the water pump, I also do the thermostat. For a few more dollars you can replace all the hoses which have the plastic connectors that get brittle with high mileage. If you are replacing the hoses, the lowest one drill a 1/4” hole and drain cleanly. As it drains take higher connections apart to vent and drain completely.
Did this today on a non-xdrive and the 2 lower water pump bolts and hidden above the steering motor. The secert is a 10m splines ratcheting wrench and address from behind the subframe. The longer the wrench the better. I used a mountain 10m offset wrench. Thats to abother video for the wrench tip.
Also, consider doing the accessory belt and tensioner. Everything is out of the way when doing the water pump. The air box is much harder to align than what I think is necessary.
Great video. Unfortunately, my BMW 428 was a pain in the a** due to the steering rack making it difficult to insert my E12 socket. The work around was using a 3/8 ratchet wrench. I was hoping it would be as easy as you showed hahaha.
I'm in the same situation with my 328i F30.... the 2 bottom bolts are pretty unaccessible due to the steering rack!!! I find a very uncomfortable orientation for my ratchet wrench to remove them, but i'm very worry to see if then I'll be able to put them again.....
Great video really helped. Did thermostat and that flange thank god I did when I pulled the flange off it disintegrated in my hands. Was only a matter of time. I bought a cheap housing sadly even though I always get parts from you guys. Had to swap out o rings because it was leaking. It made a horrible noise when started I think because it wasn’t purged fully. On my SEO d purge in a row now just to be safe.
Hi ,my n20 engine ,water pump keeps running after ive switched off vehicle and drains battery ,i did experience a leaking pipe few days before this i replaced pipe but now i have this problem of the pump continously running ,even if connect a new batter without starting up car the pump starts to run
I had to move the electric steering rack to get access to the 2 bottom water pump bolts. I fought and fought but couldn't get to it without moving. Same e12 as the water pump and a 17m nut above. Not hard and I wouldn't fight it, just nudge it out of the way.
Is there any possibility to check the pump functioning by applying 12V directly to the pins, without removing it? The bleed procedure is not working in my case but i'm not still sure it is failing.... any idea?
Hi just wondering what could possibly cause my car to have a water pump blockage code even after replacing the thermostat and water pump on my n20? Code 20A804
Sir, may I ask, I have just replaced the Bmw f30 320 i water pump, I tried blading it with the tutorial sir, the water pump therapy doesn't turn on, is there any other way, sir?
Technically it can but it would be difficult to know that the leak is actually coming from the leaky head gasget. If you had a coolant pressure tester and pressured the system you can pull the plugs and get a camera in the cylinders to see if any coolant got in the cylinders. Multiple ways to check a bad head gasget
Technically it can but it would be difficult to know that the leak is actually coming from the leaky head gasget. If you had a coolant pressure tester and pressured the system you can pull the plugs and get a camera in the cylinders to see if any coolant got in the cylinders. Multiple ways to check a bad head gasget
I've seen other people drain the coolant from the lower radiator hose as well as the water pump. Is that necessary, or is draining from the water pump all that's needed?
I have check the engine light on my 328i 2013, first when I've test with obd2 shows a lin bus error, CD8E10, CD8E12 I've replaced the accumulator regulator anything has been changed. then added CD9010 and 1D2404. A mechanic told me that the pump communication module blocks the signal puts the whole network in emergency and turns on the check engine for that the water pump should replace. He disconnected the water pump and the check engine light stayed off. Should I replace the water pump?
Sir, can I ask, my BMW is F30 320i, yesterday I replaced the thermostart after it was finished I was bleeding but the water pump didn't drain the liquid into the reservoir tube, I have followed the steps, are there any other problems on my BMW?
hello!! can i change the straight connector for square connector on the electric water pump? The pumps are the same as the N20 engine with different connectors. I've seen you do this with the high pump connectors.
Someone recommended breaking the rest of the plastic “Mickey mouse” piece to remove from the hose so you can slide the clamp off. No need to replace the hose.
Ordered a new water pump off FCP but the Only thing I’m struggling with is trying to get the back two bolts out. Not sure how you got them did you take out anything else to get to the two bolts?
Can you please help... My car BMW 2014 X3 F25 the Electric Water Pump Bleeding was working fine twice. Then, it stop after I used the Blue Devil Head Gasket Sealer. The Engine getting hot. So, I changed the Thermostat and clean out the Reservoir Tank. Same issue. Should I change the Water Pump? Is there fuse that I should check? I got 3 Codes: 1) CD9010 LIN, Message: Electric Coolant Pump: Missing. DTC Status: Current 2) 1A2004 Electric Fan, Actuating Wire: Line Disconnection DTC Status: Current 3) 1A2002 Electric Fan, Actuating Wire: Short Circuit to Ground DTC Status: Current Please help :) Thank you & God Bless
Hi Ray, it just helps in filling the system a bit easier, you can run the self-bleed procedure on the water pump a few times to reach the same goal without that tool!
I’m driving a 320xdrive bmw2015 and my dashboard shows a massage (engine overheating )but my temperature gage is not showing overheating And the engine lose power I don’t know if it is the water pump or thermostat. What has to do engine loosing power in relationships to water pump. Thanks
The car was filled with orange coolant when I drained it. This is a one family owner (mine) car and to my knowledge nobody has been in the cooling system. Very strange.
Great instructional, Gareth. Thanks! Camera work was awesome. That air filter box looked like a meat smoker! Mmmm, ribs.... ?: When should the coolant hoses be replaced, realistically? Age? Mileage?? Thanks.
Hi I had the code P0597 come up and I just purchased the thermostat off of FCP and starting to gather everything to replace it but I noticed my lower radiator hose is collapsed, is this associated with this code or should I be worried about the radiator?
@@parthdinubhai I would definitely try replacing your thermostat as soon as you can and don’t drive your vehicle or start it and if you attempt doing it yourself make sure your battery is in good health because you will need it for the bleeding process
Gareth, Did you pre-mix the coolant concentrate ( 50/50 ratio ) with demineralised water as per offical BMW factory recommendation? As always, an impressive tutorial!
Awesome video even though cameraman blows. "We will take off this bolt and this bolt." Cameraman stays on your face. "As you can see, the hoses start to collspse" Cameraman stays on your face; quick glace at out-of-focus hose, then back to your face.
Right? Lmfao horrible video. Doesn’t mention how much coolant to add, and said the coolant was 50/50 coolant and anti freeze, did he mean coolant and water??
Can a bad water pump cause mixture codes on e90 n52? I can't get rid of three codes. 2e85, 29e0, and 29e1 mixture control rich condition. Pumps seems to work fine but definitely is rich i can I can smell it sometimes. If The water pump is bad Our place it no problem I just don't wanna buy a pump that I don't need so Any opinions would be fantastic and appreciated, thanks
When I replace the water pump, I also do the thermostat. For a few more dollars you can replace all the hoses which have the plastic connectors that get brittle with high mileage. If you are replacing the hoses, the lowest one drill a 1/4” hole and drain cleanly. As it drains take higher connections apart to vent and drain completely.
Few more hundred dollars lol
Excellent explanation you are some kind of professor for tech school peace
Did this today on a non-xdrive and the 2 lower water pump bolts and hidden above the steering motor. The secert is a 10m splines ratcheting wrench and address from behind the subframe. The longer the wrench the better. I used a mountain 10m offset wrench. Thats to abother video for the wrench tip.
Great tip, thank you for commenting!
How can I access the 2 bolts at the bottom?? I have a rwd the subframe covers the bottom of the pump
More F30 videos please!
Also, consider doing the accessory belt and tensioner. Everything is out of the way when doing the water pump. The air box is much harder to align than what I think is necessary.
If not using a vacuum, do I keep the bleeder screws closed during the self bleeding process? Where does that air go?? Thanks 😊
BIG FREAKIN JOB, HOLY CRAP !!!
Great video. Unfortunately, my BMW 428 was a pain in the a** due to the steering rack making it difficult to insert my E12 socket. The work around was using a 3/8 ratchet wrench. I was hoping it would be as easy as you showed hahaha.
I'm in the same situation with my 328i F30.... the 2 bottom bolts are pretty unaccessible due to the steering rack!!! I find a very uncomfortable orientation for my ratchet wrench to remove them, but i'm very worry to see if then I'll be able to put them again.....
I installed the top bolt first, and then I used a small 1/4 ratchet with a 1/4-3/8 adapter and a small E12. Take your time, and they go right in
Great video really helped. Did thermostat and that flange thank god I did when I pulled the flange off it disintegrated in my hands. Was only a matter of time. I bought a cheap housing sadly even though I always get parts from you guys. Had to swap out o rings because it was leaking. It made a horrible noise when started I think because it wasn’t purged fully. On my SEO d purge in a row now just to be safe.
Did you have to remove the sub frame to get the bottom two bolts out
When you pull the hose how much coolant actually comes out? A gallon, more or less?
Hi ,my n20 engine ,water pump keeps running after ive switched off vehicle and drains battery ,i did experience a leaking pipe few days before this i replaced pipe but now i have this problem of the pump continously running ,even if connect a new batter without starting up car the pump starts to run
Hi, i have the same problem on my F30 320i 2015. What could be the problem?
The pump or sensor?
have any of you fixed this? please let me know as this shit is happening to me too @farrelchinnappa9484 @thabonkuna8588
Hi,i also have the same problem..what is the problem?..
could you guys do a video of this on the f30 335i n55 engine?
I had to move the electric steering rack to get access to the 2 bottom water pump bolts. I fought and fought but couldn't get to it without moving. Same e12 as the water pump and a 17m nut above. Not hard and I wouldn't fight it, just nudge it out of the way.
Can you please do the same how to for an F30?335i xDrive too? Thank you
He has. It's in their library.
Your explanation is good can understand easily will help me to change my water pump in future. Thank you 👍
On the 320i do I need to drop the power steering to have better access to the bottom bolts?
Is there any possibility to check the pump functioning by applying 12V directly to the pins, without removing it? The bleed procedure is not working in my case but i'm not still sure it is failing.... any idea?
16:27 reinstalling thermostat
Can we get some B46/48 engine (F48) repairs and maintenance videos - like transmission fluid change, diff fluid change.
Which water pump brand is the best? On f30 320i
Hi just wondering what could possibly cause my car to have a water pump blockage code even after replacing the thermostat and water pump on my n20? Code 20A804
Can a bad pump cause a missing lin code
What about a 2012 X3 35i?
Sir, may I ask, I have just replaced the Bmw f30 320 i water pump, I tried blading it with the tutorial sir, the water pump therapy doesn't turn on, is there any other way, sir?
question please: Could the vacuum leak test detect a (coolant) head gasket leak if there was one present?
Technically it can but it would be difficult to know that the leak is actually coming from the leaky head gasget.
If you had a coolant pressure tester and pressured the system you can pull the plugs and get a camera in the cylinders to see if any coolant got in the cylinders.
Multiple ways to check a bad head gasget
Technically it can but it would be difficult to know that the leak is actually coming from the leaky head gasget.
If you had a coolant pressure tester and pressured the system you can pull the plugs and get a camera in the cylinders to see if any coolant got in the cylinders.
Multiple ways to check a bad head gasget
would this be the same for F34? Thanks
I've seen other people drain the coolant from the lower radiator hose as well as the water pump. Is that necessary, or is draining from the water pump all that's needed?
I have check the engine light on my 328i 2013, first when I've test with obd2 shows a lin bus error, CD8E10, CD8E12 I've replaced the accumulator regulator anything has been changed. then added CD9010 and 1D2404. A mechanic told me that the pump communication module blocks the signal puts the whole network in emergency and turns on the check engine for that the water pump should replace. He disconnected the water pump and the check engine light stayed off. Should I replace the water pump?
Sir, can I ask, my BMW is F30 320i, yesterday I replaced the thermostart after it was finished I was bleeding but the water pump didn't drain the liquid into the reservoir tube, I have followed the steps, are there any other problems on my BMW?
Do you have to remove the subframe
No you do not need to remove the subframe
If you guys happened to do this how’d you get the bottom two bolts out? Seems super tight
@@brandoncarter707
?
@@Stxxology Any update on those two bolts? Going to be tackling this job tomorrow…yay
@@Man-Up-G hi bro i think our cars are rhd did u figure it out?
At what mileage does this part tend to fail on the f30 n20
I’ve seen anywhere from 30k miles all the way to people with 120k stating they are on the original one. My N55 is at 91k miles and still going strong.
Mine just failed at 102k
mine 115k miles still going strong
Mine just failed at 125k. Just past the extended warranty
@@jnorriectOof, how typical though.
hello!! can i change the straight connector for square connector on the electric water pump? The pumps are the same as the N20 engine with different connectors. I've seen you do this with the high pump connectors.
How to program a new water pump to a BMW 328 xi
The assumption is the hoses are replaced as well during this service interval?
Correct!
Someone recommended breaking the rest of the plastic “Mickey mouse” piece to remove from the hose so you can slide the clamp off. No need to replace the hose.
I appreciate you Mr Foley
Hey FCP euro. I recently just picked up a 1995 Audi UrS6, and I want to do the timing belt change. Can you make a DIY video on it plz? Thank you.
Do you need to take of the belt?
Ordered a new water pump off FCP but the Only thing I’m struggling with is trying to get the back two bolts out. Not sure how you got them did you take out anything else to get to the two bolts?
Can you please help... My car BMW 2014 X3 F25 the Electric Water Pump Bleeding was working fine twice. Then, it stop after I used the Blue Devil Head Gasket Sealer. The Engine getting hot. So, I changed the Thermostat and clean out the Reservoir Tank. Same issue. Should I change the Water Pump? Is there fuse that I should check?
I got 3 Codes:
1) CD9010
LIN, Message: Electric Coolant Pump: Missing.
DTC Status: Current
2) 1A2004
Electric Fan, Actuating Wire: Line Disconnection
DTC Status: Current
3) 1A2002
Electric Fan, Actuating Wire: Short Circuit to Ground
DTC Status: Current
Please help :) Thank you & God Bless
Why is my steering rack in the way. I can’t get to those bottom bolts on the pump
Well I had to unbolt the rack and move it a bit out of the way to get to the bolts. It’s the only way…in case anyone runs into a similar rack
Thanks Gareth!
i changed both water pump and thermostat and the radiator fan is still full blast
Have you checked the temp sensor connected to the fan?
@@fcpeuro actually....it is working now...looks like computer needed to relearn
@@fcpeuro location of the temp sensor, please
8:58 thermostat removal
Hose damage on deep vacuum ?
Nope. It's actually the preferred method these days.
Where is the fuse for this??!
Hello, Is the vacuum procedure absolutely necessary?
Hi Ray, it just helps in filling the system a bit easier, you can run the self-bleed procedure on the water pump a few times to reach the same goal without that tool!
@@fcpeuro Thank you!!
Gareth,
Which is easier? Doing this job on the N55 or these N26/20's?
Imo the N55 looks easier even though you really need to be under the vehicle.
I would say the N20 looks easier given the N55 is so tightly packaged.
I'm having a heck of a time getting bottom bolts out..have steering in way. He must be showing on xdrive
Coolant used to taste sweet. The bittering agents have been added over the years to discourage pets from drinking it and dying.
I’m driving a 320xdrive bmw2015 and my dashboard shows a massage (engine overheating )but my temperature gage is not showing overheating
And the engine lose power I don’t know if it is the water pump or thermostat. What has to do engine loosing power in relationships to water pump. Thanks
Did you resolve this mines doing the same I think it’s my water pump at this point
@@nosurrinda420 yes.
I had to replace water pump.
Where did you purchase your water pump I got mine at rock auto coming in on Sunday
And the water pump resolve your issue
@@nosurrinda420 yes water pump Solve the issue I purchased @ dealer bmw
Don’t buy refurbished
The car was filled with orange coolant when I drained it. This is a one family owner (mine) car and to my knowledge nobody has been in the cooling system. Very strange.
Excellent 👌
if you plan to do this on an f34, be prepared, the water pump alignment is a huge pain
is there a similar video for n55?
Corrently we have one for the coolant inlet flange, but I'll pass along the idea to get it in the que!
Great instructional, Gareth. Thanks!
Camera work was awesome.
That air filter box looked like a meat smoker! Mmmm, ribs....
?: When should the coolant hoses be replaced, realistically? Age? Mileage?? Thanks.
Hi I had the code P0597 come up and I just purchased the thermostat off of FCP and starting to gather everything to replace it but I noticed my lower radiator hose is collapsed, is this associated with this code or should I be worried about the radiator?
I have the same code with no hose collapse
@@parthdinubhai I would definitely try replacing your thermostat as soon as you can and don’t drive your vehicle or start it and if you attempt doing it yourself make sure your battery is in good health because you will need it for the bleeding process
Excellent video, thank you so much. It is extremely helpful.
good lord...cameraman....steady on.
👀
I was there while you where filming :D
I guess it was during summer because he feels so hot
actually was last week
Gareth, Did you pre-mix the coolant concentrate ( 50/50 ratio ) with demineralised water as per offical BMW factory recommendation?
As always, an impressive tutorial!
The BMW service center is quoting 18 hours of labor for this on a 2015 X1 …
You can do it!
Nice video
Awesome video even though cameraman blows. "We will take off this bolt and this bolt." Cameraman stays on your face. "As you can see, the hoses start to collspse" Cameraman stays on your face; quick glace at out-of-focus hose, then back to your face.
Right? Lmfao horrible video. Doesn’t mention how much coolant to add, and said the coolant was 50/50 coolant and anti freeze, did he mean coolant and water??
Can a bad water pump cause mixture codes on e90 n52? I can't get rid of three codes. 2e85, 29e0, and 29e1 mixture control rich condition. Pumps seems to work fine but definitely is rich i can I can smell it sometimes. If The water pump is bad Our place it no problem I just don't wanna buy a pump that I don't need so Any opinions would be fantastic and appreciated, thanks
Drivetrain warning and/or engine fan constantly running are signs of a failing water pump. They tend to fail slowly.
Don't worry about sweating I sweat profusely all the time I don't know if it's because I drink or have a high metabolism
Garett why you so outa breath man? Are you okay??
He's bulking up.
👍👍
I can't jack up the car DIY.
While this task is doable at home, I do think the mechanicals at the garage does deserve at least 500$ for the labor here(excluding parts).