In moment calculations due to 13 mm deflection, the EI is also different in different members, so moments calculated by you without considering correct EI value, results in drastic moment difference, for ex, final Moment AB = 235.221 Kn.m, other than that very nice explanation. It is indeed a complex problem to solve. Good job, Keep it up. Small suggestion, in compare to Given loading conditions, the moment produces by support sink is huge, so either the loading should be more heavy, or deflection should be less.
Sir aapka BMD in higly inaccurate the BM is 6 and calculated support moment are 105KN and you are showing then lower than 6KN in BMD diagram it should come above i mean BMD is not upto Scale
Brother small mistake in fixed end moments Moment BC and CB calculation was correct but u mentioned length as a 4 meter instead of 3 meter please check
Final moment diagram galat ha. As one end of AB is having negative bending moment and another BA is also negative bending moment So it is to be shown downward but you show both upward. Which is done when both AB and BA are of opposite sign
In moment calculations due to 13 mm deflection, the EI is also different in different members, so moments calculated by you without considering correct EI value, results in drastic moment difference, for ex, final Moment AB = 235.221 Kn.m, other than that very nice explanation. It is indeed a complex problem to solve. Good job, Keep it up. Small suggestion, in compare to Given loading conditions, the moment produces by support sink is huge, so either the loading should be more heavy, or deflection should be less.
Sir ,should the value of I i.e. moment of inertia in the term 6EI∆/l^2 not be changed for each span...as varying rigidly in goven beam?
You are always helpful... Thankyou.
I think the FEM for span AB= -Wab^2/l^2 while BA=+Wa^2b/l^2 but your FEM for BA is the same as that for AB?
Good job
Plz make videos on Analysis of sway and non sway frame by moment distribution method
Ok. Sure.
Please make video of water tank design
Sir aapka BMD in higly inaccurate the BM is 6 and calculated support moment are 105KN and you are showing then lower than 6KN in BMD diagram it should come above i mean
BMD is not upto Scale
Brother small mistake in fixed end moments
Moment BC and CB calculation was correct but u mentioned length as a 4 meter instead of 3 meter please check
Yes. Thanks for addressing it. The length should be taken as 3m while calculating fixed end moment of span BC and CB.
KN -m^2
Good
Final moment diagram galat ha. As one end of AB is having negative bending moment and another BA is also negative bending moment So it is to be shown downward but you show both upward. Which is done when both AB and BA are of opposite sign
❤❤😂🎉😅😊
Take care of units please
BM units is kn-m whereas you are showing as kn/m
Ok
Angrezi bolni nahi aati to Q bolta hai
Give respect