Toyota Tacoma Headlight Tab Repair Using Tab Magic Molding Putty
HTML-код
- Опубликовано: 4 сен 2024
- Many front-end collisions result in broken headlight tabs like this. Today’s headlights often feature LED bulbs, moveable elements, and sensors which greatly increase the complexity and cost of the headlight. This instructional video shows how to repair this complex Toyota Tacoma headlight tab using Polyvance’s 6225 Tab Magic Molding Putty.
Featured Product:
6225 Tab Magic Molding Putty - www.polyvance....
View this video on our website for products used and more information:
www.polyvance....
⚠️ Important ⚠️
- Always wear proper safety gear while working!
- The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes.
✅ SUBSCRIBE to our channel for updates on our products and tutorials!
🌐 VISIT us at www.polyvance.com
📧 EMAIL us at info@polyvance.com
📞 CALL us at 1-800-633-3047
✉️ SIGN UP for our email newsletter at omniform1.com/...
👍 Follow us on social media:
- Facebook: / polyvance
- Instagram: / polyvanceofficial
- TikTok: / polyvance
- LinkedIn: / polyvance
Browse our products:
- Best sellers: www.polyvance....
- Newest products: www.polyvance....
Check out Polyvance's plastic welders and welding rod:
- Nitrogen welders: www.polyvance....
- Hot air welders: www.polyvance....
- Airless welders: www.polyvance....
-Plastic welding rod: www.polyvance....
🎵 Music Credits:
"Sage" by Slenderbeats
From the RUclips Audio Library
Am I the only one that likes 👍 these videos before you watch them? Ha. I just know it’s gonna be good. I love them.
Thank you!
this is awesome. Can you get the job done with an iron or an air gun with a narrow barrel attachment?
How tell how you removed the whole light fixture first 😅
It is very important
I understand the level of perfection but our client won't pay for that labor and materials on one Tab .
More complex parts are being added to headlights lately (LEDs, moveable elements, etc.) and the cost is more expensive. Being able to repair a tab could save a lot of money.
This article talks about win-win scenarios for both the shop and the bill payer (check out the plastic repair section): www.autobodynews.com/index.php/component/k2/item/15517-the-best-body-shops-tips-repair-vs-replace-what-a-body-shop-should-consider.html?showall=1
If we spread the word about what can and cannot be repaired, more people will realize that they are missing out on opportunities.
First!
Why does they put talk in heater core housing behind dash where the air distribution flaps are, it writes on housing >PP-T30
I believe the talc is there to reduce cost, reduce the likelihood the part will warp when heated and cooled repeatedly and possibly to increase strength; although I'm not 100% sure on the strength.
That is way WAY to much work for a tab haha
Would you say that if it made you $$$$$? It easily can make the shop hundreds of dollars.
@@scottb7600 ....and make very pissed off customers.
@@lizardking8388 Why would they be pissed off?
Many times there is a win-win scenario for both the shop and the bill payers. Check out the plastic repair section of this article: www.autobodynews.com/index.php/component/k2/item/15517-the-best-body-shops-tips-repair-vs-replace-what-a-body-shop-should-consider.html?showall=1
@@scottb7600 For the time you put into that job, you would have to charge a lot to make a decent profit. The customer will get a couple of estimates and go with the shop that would charge probably less than half to do a job just as strong but perhaps less aesthetic in appearance.
Making the repair look perfect under the hood has its merits for the most nitpicking customer, but I think most people would be less willing to pay more for something that's not going to show when the hood is down.
You come at the customer with a hefty price, he's not going to want to hear that you'll do a better job than a typical shop; he'll just write you off as a ripoff.
Вы слишком усложняете процесс ремонта. Он становится дорогим для конечного пользователь! Все это делается намного проще!!!
Overkill.