Hi Vučko, these are awesome videos that you're making. The best thing about your channel is your relaxed and friendly presentation, and the effort you put in to document your project. The production values are excellent (also thanks to the 4K quality) and it's clear you care about your viewers. A week ago, I bought a Peugeot 207 THP 150 Féline in Récife bleu colour, which has a Stage 1 chiptuning to 185 hp. I still have to pick it up however, because the car dealer will give it some maintenance first. Your videos have allowed me to learn a lot about the car in advance, and have inspired me to do some upgrades in the future. I'll keep following your channel!
Hi from downunder. I have a 2007 207 Gti that just popped up with a de-pollution code yesterday, so that's why i'm here. I've done a LOT of yours and other videos but i think i'll scan it for codes first and see what it shows. I haven't driven it for a month or more which just adds to the confusion.
Hello dear friend, could you tell me in more detail where you ran the hose through the hood into the passenger compartment, for a very long time I can’t find the hole for pulling the wires into the passenger compartment
Hey, when you installing BOV the sound was "woosh". Now during your installation of this gauge the sound of BOV is different, its "rattling". Did you changed the BOV valve?
My turbo was overboosting when i installed BOV and turbo gauge, when I put a new turbo and when boost was at correct 1.0 bar then BOV is 'rattling' and produces different sound
Sorry I should of asked you if you installed a manual boost controller on your gti first, I'm only asking because I want my 207 gt up to stage 2 and I am not sure how high I can set the boost controller at I don't to blow up the turbo also I've tuned my car to the same level as yours pretty much but the best mod that gave my gt the most amount of boost was the turbo smart bov kompact EM VR10 Plumb back it's super easy to install plug n play they perform and sound better than forge bov they aren't cheap though I paid $400AUD for mine the 2nd best option is the DV+ made by GFB they are a really good option to increase horsepower $150AUD btw love watching your videos!!
@@zensink-tattoostudiovolkov9858 I didn't install boost controller, my boost on full throttle is around 1bar (~15psi) which is stock turbo pressure. Dont plan to do stage 2 or increase the boost, I don't need big power I enjoy my 207 GTI in the corners so 215hp is enough but good luck with your setup. You definetly should not put over 1.3 bar of boost, maybe 1.2 bar should be enough
I'm 99% sure it will your DS4 THP, here is the link: www.ebay.com/itm/FORGE-N14-N18-Boost-Gauge-Adaptor-fits-PEUGEOT-207-GTi-208-GTi-FMBGMCS-/131219981741?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
I also installed an Oil Pressure Gauge!
Watch it here: ruclips.net/video/YHdUw3CvwQ8/видео.html
Hi Vučko, these are awesome videos that you're making. The best thing about your channel is your relaxed and friendly presentation, and the effort you put in to document your project. The production values are excellent (also thanks to the 4K quality) and it's clear you care about your viewers. A week ago, I bought a Peugeot 207 THP 150 Féline in Récife bleu colour, which has a Stage 1 chiptuning to 185 hp. I still have to pick it up however, because the car dealer will give it some maintenance first. Your videos have allowed me to learn a lot about the car in advance, and have inspired me to do some upgrades in the future. I'll keep following your channel!
Hi from downunder. I have a 2007 207 Gti that just popped up with a de-pollution code yesterday, so that's why i'm here. I've done a LOT of yours and other videos but i think i'll scan it for codes first and see what it shows. I haven't driven it for a month or more which just adds to the confusion.
Svaka cast! Zverski
You are awesome 😘
Hello dear friend, could you tell me in more detail where you ran the hose through the hood into the passenger compartment, for a very long time I can’t find the hole for pulling the wires into the passenger compartment
Pause the video at 4:09...cables are going right behind the metal body panel into the cabin
When are you going to install a new exhaust?
I scheduled 25th August to do exhaust (straightpipe with custom middle silencer). Stay tuned for that video!
Excellent! Great job!
Think I would’ve used a holesaw and cut the dashboard and push them into the holes. You could’ve put one either side of the console.
hye can use show where the hose going through on part 4.03min tq
is the 208gti same way to install ?
Hey, when you installing BOV the sound was "woosh". Now during your installation of this gauge the sound of BOV is different, its "rattling". Did you changed the BOV valve?
My turbo was overboosting when i installed BOV and turbo gauge, when I put a new turbo and when boost was at correct 1.0 bar then BOV is 'rattling' and produces different sound
@@VuckoHD thanks for explanation! Is there any chance to get "rattling" on original turbo with forge bov? Like chiptuning?
Sorry I should of asked you if you installed a manual boost controller on your gti first, I'm only asking because I want my 207 gt up to stage 2 and I am not sure how high I can set the boost controller at I don't to blow up the turbo also I've tuned my car to the same level as yours pretty much but the best mod that gave my gt the most amount of boost was the turbo smart bov kompact EM VR10 Plumb back it's super easy to install plug n play they perform and sound better than forge bov they aren't cheap though I paid $400AUD for mine the 2nd best option is the DV+ made by GFB they are a really good option to increase horsepower $150AUD btw love watching your videos!!
@@zensink-tattoostudiovolkov9858 I didn't install boost controller, my boost on full throttle is around 1bar (~15psi) which is stock turbo pressure. Dont plan to do stage 2 or increase the boost, I don't need big power I enjoy my 207 GTI in the corners so 215hp is enough but good luck with your setup. You definetly should not put over 1.3 bar of boost, maybe 1.2 bar should be enough
What blow of are you running?😄
Won’t the vacuum line crimp when the door closed
It does a little bit but there is enough of a gap, I'm still using it after 2 years without issues
What did u set your boost control too?? On your gti
@@zensink-tattoostudiovolkov9858 no just boost gauge
If you do install one can you say in your video how many pounds you set it too. Thanks
Nice mate! :-)
please link to the adapter, will it fit citroen ds4 thp 200?
I'm 99% sure it will your DS4 THP, here is the link: www.ebay.com/itm/FORGE-N14-N18-Boost-Gauge-Adaptor-fits-PEUGEOT-207-GTi-208-GTi-FMBGMCS-/131219981741?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
Nice, will this fit a Peugeot RCZ 156bhp Turbo?
👀