You should have created an actual scenario with small garden, instead of animating water. It will be more effective if the system is able to switch on solenoid valve as soon as humidity level of soil comes down below certain value and switch off when desired value is reached. Any ways good work 👍
Hello Viral Science, I think this is an amazing project. I have choose this as my school project, but I have a lil problem with the code, please can you help me out?
Hey is there any software on which I can simulate my project which has both Arduino and NodeMCU esp8266 ?....... also can you tell me what software did you use for making the circuit diagram and is there a way to simulate it on that software ?
Nice Video Sir!, btw hows the arduino Sir? is it still working ? Iam confused whether i should choose arduino or plc for controlling air temperature in farm and turn on the spray or other stuffs if it is too hot
Hey, viral science !. I have got a college project... I feel that yours is quite good and since I don't have Nodemcu V1, can we use the V3 board for this project? Also, can you mention the software which you used for designing this cuircuit?
Good day amazing project... I tried making one simpler to user but with a 4 relay module and 4 moisture sensors. I used your code and altered for it to work with relays and sensor but i am having a probably with the relay when trying to use it my esp8266 module keep disconnecting and reconnect can u please help me that would be greatly appreciated
if I want to add multiple soil sensor with one node mcu so what can i change in code. and i want to do if soil moisture is low to then automatically pump on off and it just show the reading in app.
i have this issue, do you know what is the meaning of this? A fatal esptool.py error occurred: Failed to connect to ESP8266: Timed out waiting for packet header
Nice start but a little gadget... I'm working on a up to 16 plants unit, divided into 4 lines vith its own valve each. I have a bowl to mix water with 3 different liquid fertilizers. Eauch line has its own "nutrition program"... One advice: avoid resistive moisture sensor, their working principle (flowing current in water) makes tem rust quicly. Good luck & much fun 😀
@@fredykardian You should aim capacitive sensors rather. Note : I built a resistive one out of : - a soda stub plastic (female) screw - 2 metal screw - some wires - a variable resistor (variable for some kind of calibration) - some hot glue, solder , and so on Turned out to be pretty precise ! But it will prolly oxyde and then derive the measurements...
Simple but Excellent solution on plant monitoring. Can we use Power supply module on breadboard along with NODE MCU ESP 8266 inplace of external bettery? If yes, then how will be circuit diagram
Hi the Blynk is app has been upgraded to new version. In this new version there is no "select pin" option for button. only have INT V1,V2,V3,V4,DOUBLE V5,V6,V7,V8,V9,V20,STRING V11,V12,V13,V14.So which should I choose?
You are my savior. Now I don't have to worry about my plants. Thanks a ton.
You blown me by just showing Imaginary water. I understand your immense efforts for caring tiny details, hats off.
appreciable man you have put a lot of hard work in making this.
You should have created an actual scenario with small garden, instead of animating water. It will be more effective if the system is able to switch on solenoid valve as soon as humidity level of soil comes down below certain value and switch off when desired value is reached. Any ways good work 👍
hey bro i am in ATL (atal tinkering lab) and i have selected the problem based on irrigation and i found this as a solution..
thank u
Is this project working?
@@meherpragna7220 there is already a solution of this problem our teacher has rejected this project due to this. but ig it'll work
I wanted to do this project , at last i got a tutorial . Thanks a lot
Can I ask about the sensors? How much of an area can the sensor monitor? Asking because I need this for a project proposal. Hope you can help. Thanks!
Thank you this is very useful for my school project !!!
its fantasic IoT project great very use full for many people.
happy birthday from Thailand
Thankyou🤩😍
Bro thanks 😁In fucture im going to use this techanic in my farm
Very effective demo ,god bless you child ,it helps me alot
you have now shown the correct connection in the video
I lost my relay module and DHT 11 sensor
Kya hua Bhai connection galat ho gaye kya
What application to make the circuit diagrams in minute 2:44?
Terimakasih banyak untuk informasinya, sukses selalu semoga karya-karya bermanfaat.
Hello Viral Science, I think this is an amazing project. I have choose this as my school project, but I have a lil problem with the code, please can you help me out?
Bro compiling error occurs in coding how to solve it
Did you rectify the errors
Excellent project
Hey is there any software on which I can simulate my project which has both Arduino and NodeMCU esp8266 ?....... also can you tell me what software did you use for making the circuit diagram and is there a way to simulate it on that software ?
Nice Video Sir!, btw hows the arduino Sir? is it still working ? Iam confused whether i should choose arduino or plc for controlling air temperature in farm and turn on the spray or other stuffs if it is too hot
why i have this error " Error compiling for board NodeMCU 1.0 (ESP-12E Module).
?
Happy Birthday Viral Science 🥳🥳🥳🥳🥳🥳
Thankyou bro🤩🥰
A really great video, the component list was very useful. Thank you
Please give me your contact
This project in some error
Can we use 12 V DC pump inplace of solenoid water air valve...????
nice video. Which software you used for Circuit Diagrams drawing at frame 2:45 onwards.
usually people use tinkercad
Thanks for sharing knowledge.
Hii..Instead of Air water valve switch, can we use 12v dc water pump?
*_nice project_*
That's amazing! Loved it..
It's outstanding project ❤️
Congrats for this project, as it got section best project for 2020 by blynk.।।।।
@Rifat Uz Zaman nope
@@amirulaiman755 Really?
@@Aravindakshan64898jk i tried but not working
Loved It !!!!
Hello, the code is not working for the new Blynk IOT app
Can you please update?
Hey, viral science !. I have got a college project... I feel that yours is quite good and since I don't have Nodemcu V1, can we use the V3 board for this project? Also, can you mention the software which you used for designing this cuircuit?
Yes
@@ViralScience brother wifi module code getting error
Plz give ur Gmail and send the correct code
@@mmanoj3037 did you get the code?
@@ViralScience THIS OCCURING ERROR IN LATEST AURDINO PLEASE GUIDE ME ITS REALLY URGENT
ARDUINO SOFTWARE
Good day amazing project... I tried making one simpler to user but with a 4 relay module and 4 moisture sensors. I used your code and altered for it to work with relays and sensor but i am having a probably with the relay when trying to use it my esp8266 module keep disconnecting and reconnect can u please help me that would be greatly appreciated
Can you please tell me the current capacity of 12v battery
Great work and resources!!
Great Job!
Happy Birthday Viral Science 🎈🎈🎈🎊🎊🎊🎂🎂🎂
Thankyou🤩🥰
if I want to add multiple soil sensor with one node mcu so what can i change in code. and i want to do if soil moisture is low to then automatically pump on off and it just show the reading in app.
Soil moisture sensor value is showing 1024 and it is not changing in any of the condition.
Please give me the solution
This is so economically feasible!!!
Bro can we add different type of plants and can customise the moisture lvl according to the plants is that possible pls tell bro
Sir , this project is good for electrical engineering final year project
Hi, the nodemcu u using is v2 right since it can fit onto breadboard, while my v3 cant fit on breadboard
Love it great work
May I ask, after you create that application, is it possible to get its source code?
Nice. So the wifi is used to connect the node mcu to internet. But how the mobile blynk app is connecting to the mode mcu?
Can I use a capacitive soil moisture sensor instead of resistive moisture sensor.
Excellent work!!! Keep it up
Super project....!
Nice Project 👍
Great job
3rd very very nice video keep it up
Nice project sir!....How much will it cost to do this project.
How can we change the moisture level to get notified
Which application are you use for circuit design?
should be fritzing
Excellent 👌
I Subscribed 👍
great...Thank you
Having compilation problems ,please upload a doubt solving videos on this topic
Happy Birthday Bot🎉😂
Thankyou bro🤩🥰
code is not working only dht sensor working what i sholud do tell me anyone and monday i have a compettetion.
Hello Friend..
Nice video..
What software you used to draw the circuit diagram.
Can share the type of software used?
Thank you.
Can I buy whole set that have assembly already from You?
How much?
i have this issue, do you know what is the meaning of this?
A fatal esptool.py error occurred: Failed to connect to ESP8266: Timed out waiting for packet header
Nice start but a little gadget...
I'm working on a up to 16 plants unit, divided into 4 lines vith its own valve each.
I have a bowl to mix water with 3 different liquid fertilizers.
Eauch line has its own "nutrition program"...
One advice: avoid resistive moisture sensor, their working principle (flowing current in water) makes tem rust quicly.
Good luck & much fun 😀
what is your suggestion for non resistive sensor ?
@@fredykardian You should aim capacitive sensors rather. Note : I built a resistive one out of :
- a soda stub plastic (female) screw
- 2 metal screw
- some wires
- a variable resistor (variable for some kind of calibration)
- some hot glue, solder , and so on
Turned out to be pretty precise ! But it will prolly oxyde and then derive the measurements...
@@fredykardian Here is "my" capacitive sensor... It's an open source HW I "rebranded"...
@@skuizhopatt5318 superb man, ... do you have video on how to make it ?
@@fredykardian Are you american ?
Hye bro , can it be use with larger motor pump let say 2 horsepower water pump?
Thanks for sharing this project where can i get the app's code please ?
Dude what application simulation you use that make a schematic please answer 🙏
Nice video bro...
Where can I learn this technology from scratch and integrate it into a greenhouse farming making it fully automated?
I am thinking the same thing
Love it ❤️❤️
Super Bro 💖
Simple but Excellent solution on plant monitoring. Can we use Power supply module on breadboard along with NODE MCU ESP 8266 inplace of external bettery? If yes, then how will be circuit diagram
This is major project bro
Hi the Blynk is app has been upgraded to new version. In this new version there is no "select pin" option for button. only have INT V1,V2,V3,V4,DOUBLE V5,V6,V7,V8,V9,V20,STRING V11,V12,V13,V14.So which should I choose?
Where did u make the circuit? i mean on which software Did u connect the components
@@MohamedYasser-in5dn replying after 5 months lol 😂🥱🥱
No need now
This is a nice project. When I am making the project I have a error in the compiling of the nodemcu board.what can I do?
What are the applications of this project and which places this project uses
good project
Bro wich software you use for design circuits please please tell me
NICE
hi can i ask what simulatiom software did you use??? thank you!
Please what's the maximum distancefrom the site to the mobile application in the phone. Does it passes through internet?
Bro your code has been giving many errors. Also it is not working
Not working this program why compilation error pls tell me
Can I use a normal pump for it?
I have done according to u but in blynk the soil moisture and humidity is not showing
Hey,please help,ye jis tarah se Blynk app kaam krna chaiye tha,waise nhi krrha h,isme new changes aaye h,please bataye ab kaise kiya jaaye
Can anyone share the code
Happy ßirthday ẞro 🎂🎂❤️
Thankyou🥰🤩
Great ♥♥♥
Great
Nice
where did you create your diagram sir?
please.. what is the name of the program you use to draw your circuit diagram and connections??
2:42 What software did you use to draw the schematic?
I think it is Fritzing
which software you are creating the circuit diagram bro
Bro to which WiFi connection we have to connect from home WiFi or WiFi released by node board
Error compiling for board Node MCU 1.0 (ESP-12E Module ) why like this ? Pls help
Download simpletimer library from GitHub and add zip file in Arduino Library manager.
Can we use water pump instead of solenoid water valve?
What are the uses of thermal and humidity sensors.?
nice