I cracked up at the guy left holding the window trim while Kyle was on the phone! This really has been a great series, I’ve enjoyed watching very much.
I checked the comments on this and previous videos, maybe I missed it. Can you tell us what the cost was for the materials to side the house was with the LP siding?
Geez!! These are the most artistically positioned, plum, even, and eye-pleasing widows and window frames I've ever seen installed. I'm still looking for finger & thumb prints on anything - especially the windows & frames. Beyond that, I don't know of anyone who'd admit to re-installing what you did because of a preliminary measurement error; not to mention the fact that THE HOUSE IS NOT SQUARE in the first place. Hats off to you guys.
This book is a comprehensive guide for anyone who wants to build a second unit on their property. ruclips.net/user/postUgkxzaRUJNcbypw-fRBDbqqz43ULIa-1EGP- It showcases various types of houses, such as garage apartments, with photos, videos, and floor plans. The book provides the square footage and the dimensions of each house, as well as the option to order the plans or customize them according to your preferences. You can choose from a range of styles, from ultra modern to cottages and A frame lake houses. The book also offers suggestions for sheds, pool houses, and office studio buildings. This book is an ideal resource for the aspiring home designer.
I just want to say how much I’ve enjoyed this house re-siding series. You can only watch so many videos about farm structures and metal siding before you get bored. This was a nice change.
The tool you used on the window metal flashing to make 3/8 channel with thanks from a vet. who's retired... showing me how to make my Bucket list come to life
There are as many ways to hide old and crooked as there are accomplished carpenters. The tricks you employed are all good. Your advice on the gauge blocks is not wrong, but it is still always a necessity to check and recheck. Just look at some old crooked house remodels where they didn't use their head or didn't care. The stop gauge is only as good as the user in the end. They're great for consistency and efficiency. They can't make it an automatic process. Great video. Thanks for sharing
The corner window trim journey was really cool. I've been down a siding video rabbit hole because of an upcoming project at my house. I am lucky though because it is a corner only that will be about a 10' length on the front with a 2' or 3' turn on the corner. I really like the pre-made corners with this LP product.
Did I miss laying out the studs with a stud finder? If you are shooting 2 1/4 inch siding nails into plywood it will go deep enough to hit wiring and plumbing. By using 1 3/4 inch nails and trying to hit studs you stand a better chance of missing. Also spray paint pipes and wire bundles on the tyvek.
You gotta be kidding me if you think this guy needs help 😂😂😂. How amateur do you have to be if you need a stud finder.. the nail pattern is exposed prior to house wrap install. Id probably say those marks were transferred at the bottom and/or the top. This guy from RR is the best there is at carpentry.
Your exactly right about hiding out of level in the field. Keep your protrusions looking “true”. People don’t walk around with levels. If it looks square, it is square.
Thank you Ryan for releasing a great product as this shedbuilder.work Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!
at the electric meter, having no idea if you did this or not, buy some 2inch U channel riser for protecting the service cable coming out of the meter to go into the house and enough to go up to the weather head on the wire where it hooks to the overhead lines. The wire going into the house looks like it has gotten a bit too much sun and is starting to degrade. ** PVC Ribbed Cable Guard PE-2UG8 U-Guard Riser ** googling that should get you going in the right direction, you can get it in various colors, white and black and most often found in grey. Looks good man, thanks for making videos for us, regular t.v. sucks now.
Interesting seeing someone doing it in another country. I dunno if its the difference in climates, but we'd never break the cladding system for the window trims as its just another moisture in a point behind the cladding. Also, we'd install the window after cladding generally so that we can seal it as part of the cladding system.
Fantastic installation on the LP SmartSiding. Buying it pre finished is the way to go. I'm glad to see you showing off that product instead of vinyl siding.
I imagine you would be great guys to work with. I do landscaping and I put a similar attention to detail as you do. Anyone can “slap” a project together. A real master takes his time and strives for perfection.
I’ve seen about 5 videos and I love what you do. Your relationship with Greg is top notch. It’s what a mentor/boss should be. Good work!!! You have another subscriber.
Wish we could get your quality craftsmanship around here in Indiana.Nothing but hackjobbers here,could do better myself,so tired of getting shabby work.Real pleasure watching your professionalism.
In this day and age things are different but it used to be that in addition to a tape, every man working on our job carried a 6' folding rule. We would do as you did and get your reference point (usually 1/2" below the mud sill) and then measure to the boxing at all corners. We would figure our exposure, subtract the freeze board and then divide that into our height. We would then do our layout up the inside of the corners all the way around. In the event of any variation between corners, we would use the rule, slipping it up 1/16" or 1/32" at the lowest corner to achieve an even layout. You usually only did your layout 4 times because you could transfer the layout around the corner with a square. It's handy also to keep two sets of mason's line blocks and a ball of mason's line to transfer the layout mid wall or over door opening trim. You won't see them any more and I doubt carpenters today would know what they are but a preacher comes in handy for marking siding too, (not the kind you see in church on Sunday morning).
Anytime I do Hardyboard or siding, I always start with the lowest side of the house and go up from there. Level. Never cheating 1/8th here or there. Just means that on the high sides, the board will hang lower than the sheathing to match the low sides.
And also I dont know how you do it in the states but a story rod would make life so much easier. Run a laser line and mark all your boards from that line.
Kyle, when I owned my millwork business, there was a job were the ornrt windows similar to this situation was off by 3/8". I to hide yhe difference, I suggested tomthe architect touse a 3/4" quarter round, which came out beautiful. The window casing was 5/4 stock. You did a nice job.
Awesome job guys. I have some leftover Zip system tape at my house too. Awesome stuff as long as somebody else pays. Forty dollars a roll and all. Best LP install vid ever.
I've been really enjoying this series..............till now. I just d ok nt know if I can watch 26 minutes of this tonight unless it starts getting better. But the siding looks awesome brother!!!
My retired boss always said when you're doing new siding on an old house you always measure from the soffit down to get your lines for your starting edge because then you're always going to be even with the soffit he's got A good eye that he can even pick out a quarter inch difference. And instead of using wood glue we used to color match quad adhesive. If you go excessive you just let it dry and then peel it off.
Hey Sir, I have a question. My house was built in 1986 with smart side on top of plywood sheeting (no tyvek or anything) the top of each board and the metal flashing were sealed with silicone. No leaks or mold or any water damage since the silicone is still holding strong. Now I have to replace a deck door for a window. Could I do the same (plywood, siding, silicone and metal flashing) or I have to wrap my house up on plastic and tape? Thanks
I have always learned to tape the bottom of the jam and work up, to keep water from the sill, not the bottom of the window after it is installed. That way water still runs away from the window.
Use the same stuff as your trim but 6 inch center a hole then cut in have use that for wires and hose bibs coming out of the house also for light blocks looks clean
Why did you install the flashing above the house wrap? Can't water get behind it? Curious about the best practices here. Either way, love the remodel series and all of your work!
One thing I love about this, is seeing someone put so much effort in what they do. And you seem to love what you do, which makes it even better to watch. Amazing work sir. I can truly appreciate your craft.
It looks good, however, I see an exposed nail at 5:35 right under where you face nailed the board above it 😜 also I would use a 16 gauge nailer for face nailing as it's much more hidden. Great work though
Should all horizontal runs of sidings be caulked ( where each siding meets the one below)? I know the 1st row/BOTTOM row should never be caulked as its where water drains out, but what about the rest? Thanks
You don't need to caulk the horizontal only around the bottom of the window not where the z flashing is and make sure to tuck your z flashing behind the house wraped then tape the z flashing
Hi, I love your videos and at 3:40 you have small orange tool : "simple cider tools", where did you buy it because i did not find somewhere have it, thanks and you do a good jobs :)
Lp smart side install video doesnt show a metal sheet inbetween joints. They caulk/seal them. I followed the install video but wish i had done it like these guys.
What do you think about running vertical strips across the house and attaching LP to it? it creates a air gap behind the LP allowing it to dry from water and moisture .
Kyle, when you trimmed out the double window at 5:27 would you ever have an instance that you’d put flashing with a kick (like you did at the top of the window) to channel water away from getting behind the siding because of the gap you need to leave in the trim board you notched around the window?
Why didn't you take the tape off the bottom of the windows? You're doing a beautiful job, and I'm so impressed by the rapport with have with your workers!
So this siding won't curl out at the bottom where it's not nailed? And what will you do to hide the nails heads that show, paint? Caulk? It's looking good, hope it weathers the test of time.
First off, love this series! One real question and not trying to be a troll, which is hard to say when I'm in the RUclips comments. The two corner windows not being on exactly the same plan going around the corner, since you installed new windows, would not have been possible to plane down a board to make them exactly the same before installing the window? Big picture it's not like you can notice a 1/4" anyway. And again, love this series and your home remodeling series too.
RR Buildings well, if you hadn't have said it in the video noone would ever have known.. which says a lot about you guys for showing the mistake so others can learn from it. That deserves some Casey's donuts!
Great stuff, very informational. I love watching your videos, but I can't seem to find exact details on that very last course on installing below sofit. It looks like a lot of people use a 1×3 trim board does that go over the last course or does that go on 1st and the lap siding butts up to it? and do you caulk anywhere? Along sofit? Thanks.
1/8" over 30' would be acceptable in my book for siding and a lot of other things in carpentry. Yeah it's nice to have things perfect but sometimes you have to adjust a little, guarentee no home owner would even notice
Thanks for this one. It shows me how incorrectly mine was installed. The windows still aren't trimmed. I now have to figure out how to close all the gaps around the windows now that its up. Will I crack the concrete by nailing over since it's already on there?
@@thegreatga yeah and come on, I think Greg is like in his mid-20's. Very very very few 20-something year olds I know own a home, let alone even moved out of their parents house.
@@kylepac Pretty sure Kyle said previously he doesn't charge Greg any rent. Also renting isn't a bad thing, home ownership isn't the ideal everyone makes it out to be from a financial viewpoint. Greg gets his house upgraded....zero cost to him, all costs to the homeowner (Kyle). Windows need replacing, who pays? Boiler (furnace I think American's call it) who pays? The homeowner, building insurance, who pays? Interest on a mortgage, nope not if you rent. Purchase fees and taxes, nope not if you rent. There is a lot to be said for renting, in many countries such as Germany renting is the norm and home ownership is in the minority.
Kyle, When you use pre-painted SmartSide or Hardi, what kind of caulk do you use at the ends? I'm concerned that the caulk will age much faster than the trim and siding and look pretty rough in a few years.
LP recommends OSI Quad Max or similar exterior caulk that meets ASTM 920, minimum class 25 (whatever that means 😂). I just went with Quad Max b/c they show it in there video. Not sure about Hardi…
Thanks for checking out the remodel video series. Please like and subscribe or share with your friends. Thanks
RR Buildings another awesome video!! Keep it up😁
@@zacharykmiecik1407thanks brother
I cracked up at the guy left holding the window trim while Kyle was on the phone! This really has been a great series, I’ve enjoyed watching very much.
I checked the comments on this and previous videos, maybe I missed it. Can you tell us what the cost was for the materials to side the house was with the LP siding?
292,000 friends...
Geez!! These are the most artistically positioned, plum, even, and eye-pleasing widows and window frames I've ever seen installed. I'm still looking for finger & thumb prints on anything - especially the windows & frames. Beyond that, I don't know of anyone who'd admit to re-installing what you did because of a preliminary measurement error; not to mention the fact that THE HOUSE IS NOT SQUARE in the first place. Hats off to you guys.
Thanks
This book is a comprehensive guide for anyone who wants to build a second unit on their property. ruclips.net/user/postUgkxzaRUJNcbypw-fRBDbqqz43ULIa-1EGP- It showcases various types of houses, such as garage apartments, with photos, videos, and floor plans. The book provides the square footage and the dimensions of each house, as well as the option to order the plans or customize them according to your preferences. You can choose from a range of styles, from ultra modern to cottages and A frame lake houses. The book also offers suggestions for sheds, pool houses, and office studio buildings. This book is an ideal resource for the aspiring home designer.
I just want to say how much I’ve enjoyed this house re-siding series. You can only watch so many videos about farm structures and metal siding before you get bored. This was a nice change.
Reid Earls agreed 👍
Great job, finally good to see a landlord who actually cares for his property, by doing the job the right way and not just as quickly as he can.
The tool you used on the window metal flashing to make 3/8 channel with thanks from a vet. who's retired... showing me how to make my Bucket list come to life
Your enthusiasm and drive is nice to watch. 👍
There are as many ways to hide old and crooked as there are accomplished carpenters. The tricks you employed are all good. Your advice on the gauge blocks is not wrong, but it is still always a necessity to check and recheck. Just look at some old crooked house remodels where they didn't use their head or didn't care. The stop gauge is only as good as the user in the end. They're great for consistency and efficiency. They can't make it an automatic process. Great video. Thanks for sharing
Kyle - that window corner looks sweeeet from here.Greg is going to have a outstanding looking house. What a nice landlord.
The corner window trim journey was really cool. I've been down a siding video rabbit hole because of an upcoming project at my house. I am lucky though because it is a corner only that will be about a 10' length on the front with a 2' or 3' turn on the corner. I really like the pre-made corners with this LP product.
Good stuff for sure but you can make your own very easily as well
Did I miss laying out the studs with a stud finder? If you are shooting 2 1/4 inch siding nails into plywood it will go deep enough to hit wiring and plumbing. By using 1 3/4 inch nails and trying to hit studs you stand a better chance of missing. Also spray paint pipes and wire bundles on the tyvek.
You gotta be kidding me if you think this guy needs help 😂😂😂. How amateur do you have to be if you need a stud finder.. the nail pattern is exposed prior to house wrap install. Id probably say those marks were transferred at the bottom and/or the top. This guy from RR is the best there is at carpentry.
Love the flare up on the above window flashing edges. Will have to use that on future jobs!
i like that idea for the flashing, totally stealing that.
Your exactly right about hiding out of level in the field. Keep your protrusions looking “true”. People don’t walk around with levels. If it looks square, it is square.
Love the pride you all take in craftsmanship
I have seen that Craig's jig infomercial a bunch of times but you're the first contractor that I have ever seen use one.
Thank you Ryan for releasing a great product as this shedbuilder.work Most of the plans I have imagined in my mind are put down on your woodworking plans. This is more like a genius job. I love it!
at the electric meter, having no idea if you did this or not, buy some 2inch U channel riser for protecting the service cable coming out of the meter to go into the house and enough to go up to the weather head on the wire where it hooks to the overhead lines. The wire going into the house looks like it has gotten a bit too much sun and is starting to degrade. ** PVC Ribbed Cable Guard PE-2UG8 U-Guard Riser ** googling that should get you going in the right direction, you can get it in various colors, white and black and most often found in grey.
Looks good man, thanks for making videos for us, regular t.v. sucks now.
the window trim looks incredible as well as everything els
Kyle you should do a quick vid on your 5th wheel
that thing looks sweet
btw , great work as always
Thank you for your extensive attention to detail.
Your videos are relaxing too.
Wow the drip cap idea is nice, have to be money with the window kits. Nice job! Good video
very professional. Glad I watched this. This will help me out a lot in my general contractor business
You seem like a really good guy to work with and for!
Interesting seeing someone doing it in another country. I dunno if its the difference in climates, but we'd never break the cladding system for the window trims as its just another moisture in a point behind the cladding. Also, we'd install the window after cladding generally so that we can seal it as part of the cladding system.
BOOM. Looking like a bag of money!💰 love this channel. It inspires me to push myself every day. Thank you.
Really like that siding. So easy to install.
I love the attention to detail @RRBuildings
Very inspirational and great videos
Never gets old watching Kyle do trim
Fantastic installation on the LP SmartSiding. Buying it pre finished is the way to go. I'm glad to see you showing off that product instead of vinyl siding.
I imagine you would be great guys to work with. I do landscaping and I put a similar attention to detail as you do. Anyone can “slap” a project together. A real master takes his time and strives for perfection.
This is art, I have nothing more to say.
You a doing a meticulous job and it looks great. The pure white color would not work well where I live, but you can paint it any color down the line.
I’ve seen about 5 videos and I love what you do. Your relationship with Greg is top notch. It’s what a mentor/boss should be. Good work!!! You have another subscriber.
Wish we could get your quality craftsmanship around here in Indiana.Nothing but hackjobbers here,could do better myself,so tired of getting shabby work.Real pleasure watching your professionalism.
Man The head Flashing is golden This required in Canada end dams higher
The siding is to have an air space to allow water to drain out.
In this day and age things are different but it used to be that in addition to a tape, every man working on our job carried a 6' folding rule. We would do as you did and get your reference point (usually 1/2" below the mud sill) and then measure to the boxing at all corners. We would figure our exposure, subtract the freeze board and then divide that into our height. We would then do our layout up the inside of the corners all the way around. In the event of any variation between corners, we would use the rule, slipping it up 1/16" or 1/32" at the lowest corner to achieve an even layout. You usually only did your layout 4 times because you could transfer the layout around the corner with a square. It's handy also to keep two sets of mason's line blocks and a ball of mason's line to transfer the layout mid wall or over door opening trim. You won't see them any more and I doubt carpenters today would know what they are but a preacher comes in handy for marking siding too, (not the kind you see in church on Sunday morning).
DUDE! That kick out is Gold!
Anytime I do Hardyboard or siding, I always start with the lowest side of the house and go up from there. Level. Never cheating 1/8th here or there. Just means that on the high sides, the board will hang lower than the sheathing to match the low sides.
the definitely made a bit more work for themselves by not doing it this way. however it still looks great.
And also I dont know how you do it in the states but a story rod would make life so much easier. Run a laser line and mark all your boards from that line.
could you show how to cut the siding around the windows and a short video on the window trim assembly? Measuring cutting and assembly
Great detail on the flashing. The 3/8" tab is genius.
Basically, a very good series. Can't wait for the next video. Enjoy the day. Ray L
thanks
Kyle, when I owned my millwork business, there was a job were the ornrt windows similar to this situation was off by 3/8". I to hide yhe difference, I suggested tomthe architect touse a 3/4" quarter round, which came out beautiful. The window casing was 5/4 stock. You did a nice job.
Awesome job guys. I have some leftover Zip system tape at my house too. Awesome stuff as long as somebody else pays. Forty dollars a roll and all. Best LP install vid ever.
I've been really enjoying this series..............till now. I just d ok nt know if I can watch 26 minutes of this tonight unless it starts getting better. But the siding looks awesome brother!!!
G'day guys, nice job. Greetings from Tasmania. Under down under.
My retired boss always said when you're doing new siding on an old house you always measure from the soffit down to get your lines for your starting edge because then you're always going to be even with the soffit he's got A good eye that he can even pick out a quarter inch difference. And instead of using wood glue we used to color match quad adhesive. If you go excessive you just let it dry and then peel it off.
Hey Sir, I have a question. My house was built in 1986 with smart side on top of plywood sheeting (no tyvek or anything) the top of each board and the metal flashing were sealed with silicone. No leaks or mold or any water damage since the silicone is still holding strong. Now I have to replace a deck door for a window. Could I do the same (plywood, siding, silicone and metal flashing) or I have to wrap my house up on plastic and tape? Thanks
RR Buildings for the win every time
I have always learned to tape the bottom of the jam and work up, to keep water from the sill, not the bottom of the window after it is installed. That way water still runs away from the window.
Use the same stuff as your trim but 6 inch center a hole then cut in have use that for wires and hose bibs coming out of the house also for light blocks looks clean
Your awesome man. Thanks for doing the videos. Thanks for all the explanations.
You are welcome...glad you like them
Great job on that window trim!
Fantastic Job as always! your skills shine, with new work or renovation
Great job , my last siding job I did last month made my guys pop lines for stud location. Just a thought
I SUPER appreciate the footage from 13:00 onwards showing the **real** life frustrations, process, and teamwork of the project.
Awesome work! Be sure to do a Before and After when your done. Major nice!
I like the r and r logo on the house wrap.
Thanks
Does Greg know he's getting the boot when the house siding is completed? JUST KIDDING GREG! Looks fantastic. 👍
Raise the Rent!! Ha Ha
Yay...so excited to see part 6!
Great job on those huge windows! So professional!!
Kyle, what about a 3/16 deep x width of the flange rabbit so the trim lays flat on the wall......
love this format. keep up the work.
Never bored with your videos always a learning experience. House looks fantastic sorry Greg is it for sale?
Why did you install the flashing above the house wrap? Can't water get behind it? Curious about the best practices here. Either way, love the remodel series and all of your work!
typically you would want it under...however up under the soffit and gutter with no where for water to go to...I wasn't worried...good question
Looking great, learning lots! Thanks!
Im a new subscriber and all I can say this is amazing and i love it
Thanks
One thing I love about this, is seeing someone put so much effort in what they do. And you seem to love what you do, which makes it even better to watch. Amazing work sir. I can truly appreciate your craft.
It looks good, however, I see an exposed nail at 5:35 right under where you face nailed the board above it 😜 also I would use a 16 gauge nailer for face nailing as it's much more hidden. Great work though
Should all horizontal runs of sidings be caulked ( where each siding meets the one below)?
I know the 1st row/BOTTOM row should never be caulked as its where water drains out, but what about the rest? Thanks
You don't need to caulk the horizontal only around the bottom of the window not where the z flashing is and make sure to tuck your z flashing behind the house wraped then tape the z flashing
Greg reppin that durtymax jack shirt!! I see you Greg!!
Yeah man!!
Why no top metal flashing on the 2 larger windows??
Hi, I love your videos and at 3:40 you have small orange tool : "simple cider tools", where did you buy it because i did not find somewhere have it, thanks and you do a good jobs :)
If you put flashing at the gaps between boards on a long run, why wouldn't you also put it at the end next to the corner boards?
Because they caulk the outside corners. They don't caulk the middle joints.
Lp smart side install video doesnt show a metal sheet inbetween joints. They caulk/seal them. I followed the install video but wish i had done it like these guys.
What length siding nails are you using and are you trying to hit studs
Killing it! Looking good boys!
What do you think about running vertical strips across the house and attaching LP to it? it creates a air gap behind the LP allowing it to dry from water and moisture .
Rain screen
Kyle, when you trimmed out the double window at 5:27 would you ever have an instance that you’d put flashing with a kick (like you did at the top of the window) to channel water away from getting behind the siding because of the gap you need to leave in the trim board you notched around the window?
Why didn't you take the tape off the bottom of the windows? You're doing a beautiful job, and I'm so impressed by the rapport with have with your workers!
So this siding won't curl out at the bottom where it's not nailed? And what will you do to hide the nails heads that show, paint? Caulk? It's looking good, hope it weathers the test of time.
yes no need for face nailing and you just touch up paint the nail heads
First off, love this series! One real question and not trying to be a troll, which is hard to say when I'm in the RUclips comments. The two corner windows not being on exactly the same plan going around the corner, since you installed new windows, would not have been possible to plane down a board to make them exactly the same before installing the window? Big picture it's not like you can notice a 1/4" anyway. And again, love this series and your home remodeling series too.
Totally could have done something at the time... it slipped past us
RR Buildings well, if you hadn't have said it in the video noone would ever have known.. which says a lot about you guys for showing the mistake so others can learn from it. That deserves some Casey's donuts!
Great stuff, very informational. I love watching your videos, but I can't seem to find exact details on that very last course on installing below sofit. It looks like a lot of people use a 1×3 trim board does that go over the last course or does that go on 1st and the lap siding butts up to it? and do you caulk anywhere? Along sofit? Thanks.
I love these rebuilding house videos more places
YOU’RE WEARING BOOTS!
Mom: how was work?
Me: 23:52 🤷♂️
is the metal flashing not required around the windows/doors? I'm assuming the tape takes care of that?
They put it on under the siding.
Any chance we'll get to see the "final" on the hunting lodge? After interior done and fully furnished. It's a great project. Thanks.
I've still got videos coming
The trick to making a crooked house look straight it to hire a house leveling company to make it straight LOL
I would sell my soul to have this guy completely re-side my house in WA
I've been trying to get him down to TX for EVER..... it just ain't gonna happen man. lol
@@genemounce8302 a boy can dream lol
@@genemounce8302 never say never...just not right now with my family and all
Place looks beautiful, thumbs up.
1/8" over 30' would be acceptable in my book for siding and a lot of other things in carpentry. Yeah it's nice to have things perfect but sometimes you have to adjust a little, guarentee no home owner would even notice
Doing great zack!
Magnifique 👍👍 good job dommage qu on voit les clous continue comme ça j adore tes chantiers 🏗
When u say u shoulda used trim nailer. Would that hold the whole window trip up?
Thanks for this one. It shows me how incorrectly mine was installed. The windows still aren't trimmed. I now have to figure out how to close all the gaps around the windows now that its up. Will I crack the concrete by nailing over since it's already on there?
Don't You think those exposed to rain nails will corode/get rust and "bleed", and this white siding won't look so good?
1/8" in 30 foot you won't see that from my house, but from Greg's house he might!
greg doesn't own a house bc kyle doesn't pay him enough money and he is to stupid to join the union so he has to rent from kyle
@@kylepac Funny, not funny. Join a union, then instead of paying rent, he pays union dues, just to work.
Pension, insurance?
@@thegreatga yeah and come on, I think Greg is like in his mid-20's. Very very very few 20-something year olds I know own a home, let alone even moved out of their parents house.
@@kylepac Pretty sure Kyle said previously he doesn't charge Greg any rent. Also renting isn't a bad thing, home ownership isn't the ideal everyone makes it out to be from a financial viewpoint. Greg gets his house upgraded....zero cost to him, all costs to the homeowner (Kyle). Windows need replacing, who pays? Boiler (furnace I think American's call it) who pays? The homeowner, building insurance, who pays? Interest on a mortgage, nope not if you rent. Purchase fees and taxes, nope not if you rent. There is a lot to be said for renting, in many countries such as Germany renting is the norm and home ownership is in the minority.
Kyle, When you use pre-painted SmartSide or Hardi, what kind of caulk do you use at the ends? I'm concerned that the caulk will age much faster than the trim and siding and look pretty rough in a few years.
LP recommends OSI Quad Max or similar exterior caulk that meets ASTM 920, minimum class 25 (whatever that means 😂). I just went with Quad Max b/c they show it in there video. Not sure about Hardi…
The house is looking good
Great tip at 20:10 !!!
I've been using it for years a router to break the edge helps an lots of caulk an paint