Installing WILWOOD Disc Brakes!

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии •

  • @davidwesselsr7316
    @davidwesselsr7316 4 месяца назад

    Looking Great

  • @malcolmhammond2135
    @malcolmhammond2135 8 месяцев назад

    It’s looking great Cody. I’m assuming you cleaned any residue off the rotors with brake clean or acetone.

    • @CodyBuilds
      @CodyBuilds  8 месяцев назад +1

      No I didn’t but it was intentional and for a very specific reason. I’m anticipating at least another several months before I can actually drive this truck. The chassis is going into storage until the body work is done and I didn’t want the rotors rusting on me. When I plumb the brakes I’ll clean everything up.

    • @malcolmhammond2135
      @malcolmhammond2135 8 месяцев назад

      Makes sense.

  • @sanchezcar42
    @sanchezcar42 7 месяцев назад

    Did the qa1 kit come with the castle nut for the spindle hub or did the willwood break kit

    • @CodyBuilds
      @CodyBuilds  7 месяцев назад

      Neither! I had to pick the castle nuts up separately from both kits. They definitely didn’t come with the Wilwood kit. If they came with the QA1 kit I lost them during assembly but I really don’t think I did. I organized all the hardware before installation. They are 3/4-20 inch thread spindle nuts. Should be pretty widely available at your local parts store.

  • @corydriver7634
    @corydriver7634 7 месяцев назад

    🥴Snapping that bit right off the get go I’d of said a few bad words.

    • @CodyBuilds
      @CodyBuilds  7 месяцев назад

      I edited those out! Have to keep it clean for the kids 😂

  • @CarolynPike-j6l
    @CarolynPike-j6l 8 месяцев назад

    nooooooo screw willeood brakes
    GET THEMHOTBOY BRAKES FROM
    STRANGE BRAKES AND REAR ENDS.
    USE THE hot boy BRAKES and calipers smarting up.
    omg garage hsvidoes scca
    STRANGwmmmmmmmF YOU WANT TO STOP AND YOU WAIT