Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Your video was real helpful today THANKS SO MUCH FOR POSTING THIS AND I HOPE THE LIKE AND COMMENT HELPS YOU SOME❤❤❤❤❤❤❤
I have a 04 Yukon SLT and mines stuck in 4 high as well
Same issue as yours dealing with it right now
Replace the 4wd button control. I had the same problem on my 04 tahoe and it worked again.
I believe it’s the button it self the switch could be going bad I have the same issue I just got mine back in 2wd as I’m typing I turn it off then turn the car back on an it started to flash when I push the 2wd then it went in a few seconds later
Drive 10 mph on a straight way ,put in neutral and press 2 up button while maintaining slow speed . It should switch immediately.
ima try that
Did that work
What do you mean by 2 up
@@LEGEND-qj3ex think he means 2 wd high
That shouldn't work
Buy a new 4x4 shaft if that still don’t work buy a new transfer case I had to buy the new shaft and it worked
💯💯💯
Stupid fuckin buttons I love dodge for the manual lever transfer case
HAVING SAME ISSUE RIGHT NOW..DID U EVER FIGURE IT OUT???
My encoder went out!!!!!
@@DubbTV how did you figure the encoder went out how did you get that diagnosis?
Yes I did
@@DubbTV how did you figure the encoder went out though? How did u get the diagnosis?
@Dubb TV how did you figure the encoder went out though? How did u get the diagnosis?
I’m having the same issue
I had to disable traction for it to switch back
Remove your fuse it’s a 20 amp it will reset your 4x4 system or you can buy a 14$ switch on Amazon that’s what I did.
@@DubbTVwhere is the traction my Tahoe is stuck in 4HI
Try starting the engine
Start it then what?
@@DubbTV your video is shot with the engine off and the vehicle in park, it wont shift unless the engine is running.
Even with my engine running it won’t engage
Did you figure it out
Not yet bro
How about now?
@@NoLoveinHell still working on it
@@DubbTV how’s it going with that bro?
@@gerardoibarra6412 still don’t know bro
Your video was real helpful today THANKS SO MUCH FOR POSTING THIS AND I HOPE THE LIKE AND COMMENT HELPS YOU SOME❤❤❤❤❤❤❤
I have a 04 Yukon SLT and mines stuck in 4 high as well
Same issue as yours dealing with it right now
Replace the 4wd button control. I had the same problem on my 04 tahoe and it worked again.
I believe it’s the button it self the switch could be going bad I have the same issue I just got mine back in 2wd as I’m typing I turn it off then turn the car back on an it started to flash when I push the 2wd then it went in a few seconds later
Drive 10 mph on a straight way ,put in neutral and press 2 up button while maintaining slow speed . It should switch immediately.
ima try that
Did that work
What do you mean by 2 up
@@LEGEND-qj3ex think he means 2 wd high
That shouldn't work
Buy a new 4x4 shaft if that still don’t work buy a new transfer case I had to buy the new shaft and it worked
💯💯💯
Stupid fuckin buttons I love dodge for the manual lever transfer case
HAVING SAME ISSUE RIGHT NOW..DID U EVER FIGURE IT OUT???
My encoder went out!!!!!
@@DubbTV how did you figure the encoder went out how did you get that diagnosis?
Yes I did
@@DubbTV how did you figure the encoder went out though? How did u get the diagnosis?
@Dubb TV how did you figure the encoder went out though? How did u get the diagnosis?
I’m having the same issue
I had to disable traction for it to switch back
Remove your fuse it’s a 20 amp it will reset your 4x4 system or you can buy a 14$ switch on Amazon that’s what I did.
@@DubbTVwhere is the traction my Tahoe is stuck in 4HI
Try starting the engine
Start it then what?
@@DubbTV your video is shot with the engine off and the vehicle in park, it wont shift unless the engine is running.
Even with my engine running it won’t engage
Did you figure it out
Did you figure it out
Not yet bro
How about now?
@@NoLoveinHell still working on it
@@DubbTV how’s it going with that bro?
@@gerardoibarra6412 still don’t know bro