I appreciate this video thanks you saved me a ongoing headache the only thing I did differently was instead of cutting the end of the connector I wired in a pigtail so that way in the future I can replace the light without cutting it again
the ballast does not fail because of water splashing up. it fails because of condensation inside of the headlight housing which then falls down into the ballast connector. the ballast is sealed from the bottom but not the top. you can see at the end of your video that you have condensation inside of your headlight housing which caused your ballast to fail.
@@rcaldwell56 I removed all the condensation and lightly injected air to find the source of the leak, and then sealed it with the proper sealant… And then regained use of my HID system, instead of putting LEDs in there and cutting up and splicing factory wire harness with Chinese LEDs
It’s not going to overheat or burn my led ? Thinking of doing it rn Bcs someone wired one of the headlights to be halogen before I bought the car but one side still has hid .
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I appreciate this video thanks you saved me a ongoing headache the only thing I did differently was instead of cutting the end of the connector I wired in a pigtail so that way in the future I can replace the light without cutting it again
I'LL UNSCREW THE CONNECTORS, THEN WIRES RECONNECT THE WIRES, THEN RE-SCREW THE CONNECTORS, "DONE"!😉😎
Bro.. I appreciate your time in this video and the FREE information.🤙🏾
🤙👍
Thnx for the example. I understand it better now
My savior for my dilemma today. THANK YOU!
🤭😉👍 Since I aired this video, I never looked back! NO PROBLEMS ONCE SO EVER!
Can you do this with a 2007 cadillac dts?
Thank You! May all the good Graces shine upon You.
the ballast does not fail because of water splashing up. it fails because of condensation inside of the headlight housing which then falls down into the ballast connector. the ballast is sealed from the bottom but not the top. you can see at the end of your video that you have condensation inside of your headlight housing which caused your ballast to fail.
YEAH, BUT DID YOU CHANGE YOUR ORIGINAL HEADLIGHTS OVER TO L.E.D"S. AFTER UNPLUGGING, AND SHAKING THE WATER OUT OF THE BALLAST?
@@rcaldwell56 I removed all the condensation and lightly injected air to find the source of the leak, and then sealed it with the proper sealant… And then regained use of my HID system, instead of putting LEDs in there and cutting up and splicing factory wire harness with Chinese LEDs
@@thishandleisalreadytakenwhich sealant did you use?
I cannot find a set of these bulbs that have wiring . they all have a plug. I thought this would be easy to do but I have nothing to wire it to.
Do the high beams work normal after the install?
Do anybody no where I can find ballast mine didn’t come with it
It works exactly as stated! Thanks so much.
YOU'RE QUITE WELCOME!😉😎👊👍
bro you are the best !!!
How do they compare to the original HID bulbs for night driving?
THEY'RE A LITTLE BRIGHTER, BUT NOT BY MUCH IN MY OPINION.
Fantastic thank you for sharing 🥰
👍👌
@@rcaldwell56 🎊👊
Dam good video. Thanks?
What about the light over top of that light I want all my lights to work do I have to do the same thing with those lights too
I'VE NOT HAD TO CHANGE THE UPPERS YET. STILL LICKING, AND TICKING!
Thanks buddy I needed that I just want and Brot new light
JUST TRYING TO KEEP FOLKS OUT OF OUR POCKETS!😉
I have too much trouble with those lights.
Bad idea how are you going to have high beams?????? For dark roads????
Good info thanks
Just trying to help.
It’s not going to overheat or burn my led ? Thinking of doing it rn Bcs someone wired one of the headlights to be halogen before I bought the car but one side still has hid .
FOLLOW THE VIDEO INSTRUCTIONS, YOU'LL BE FINE!
Audio is very low. I can barely hear you.
Now you don't have high beams u should've bought the right bulbs
Why are we using house connectors on cars? Those blue twist connectors are for houses not cars, they make heat shrink connectors for cars..
I HAVEN'T HAD ONE PROBLEM SINCE I AIRED THIS VIDEO, RAIN, SLEET, NOR SNOW. WORK SMART NOT TAKE ALL DAY DOING THINGS!🤓👍
Bravo
Why are talking so low Bro.
【ｐｒｏｍｏｓｍ】 ✨