Everything You Need To Know About your Apollo LCD Settings (Tutorial)
HTML-код
- Опубликовано: 24 сен 2024
- Tyler walks you through an easy to follow guide on how to use your Apollo Scooter LCD screen and settings.
If there is anything we forgot to cover, leave a comment below.
P1: lcd brightness
P2: miles/kilometers
P3: voltage (depends on scooter)
P4: hibernation timer
P5:
P6: wheel diameter
P7: number of magnets on the motor (don’t change)
P8: limitation on power
P9: kick or zero start
P10:
P11: electronic breaking 1-5
P12: soft or high acceleration 1-5
P13:
P14:
P15: cut of voltage (don’t change)
P16: zeroing the km counter
P17: cruise control (on=001)
P18:
P19:
P20:
As always, if you have any questions or concerns, get in touch with us via email or phone.
E. contactus@revrides.com
P. 360-888-7433
Stay in the loop:
Instagram: REVrides_official
Facebook: www.Facebook.com/REVrides
My man! This is exactly what I was searching for. Clearly explained and easy to follow. Just set mine up as u recommended. Legend! Cheers!
Zero 10x LCD settings
P1: lcd brightness
P2: miles/kilometers
P3: voltage (depends on scooter)
P4: hibernation timer
P5:
P6: wheel diameter
P7: number of magnets on the motor (don’t change)
P8: limitation on power
P9: kick or zero start
P10:
P11: electronic breaking 1-5
P12: soft or high acceleration 1-5
P13:
P14:
P15: cut of voltage (don’t change)
P16: zeroing the km counter
P17: cruise control (on=001)
P18:
P19:
P20:
Thanks a LOT for the information. It helped me a LOT💯💯💯
Thanks for the info 😊
I can't get the accelerator to go, what settings do I use
Hi, difference from A and d if you press red button for 2 sec?then p15 voltage setting of mine is 39!it s ok?zero 8 41v 10Ah, thank you!!
Is the settings same on 8x?
Finally I found a video explaining this. I probably have everything screwed up right now
Just bought a Zero 9 and Im glad I saw this video. This wasn’t included in the instructions manual.
Thanks, man!........I really needed that video......I just bought a Zero 10 and was already trying to figure out all the panel control settings
Thank you for the outstanding job you did in this tutorial.
what if my settings won't save?
You’d think that a scoot would come with instructions. Dude you are awesome!
Just bought an M4 , great help man thank you , really needed that 👍
how fast
I was hoping I’d find this tutorial, cheers man 👍🛴
Hi i would like to set
P11 and P12 to 5 (electronic breaking and acceleration ) is it can harm the z10 motor or the battery?
Hi Boris, You can definitely up you braking and acceleration! Ride Safe!
Champion - thank you - i nearly had the scooter run away from me today and wanted kick to start on - you gave me the info that the manual didnt.
Excellent tutorial and explanation. Just been trying to figure out settings and the tiny manual that comes with the unit is useless. This is precisely what I needed. Cheers!
Hey! Thank You for the information!
But unfortunately I didn’t find what I need, my LCD display doesn’t show my battery right, just full or empty, any configuration for this?
Cheers
Good evening, how to remove security please because I have to go with it to work thank you for responding quickly.
Thanks, I have the Plug City scooter with same menu. Must be same unit under different name. Great details !
When i set P9 to push to start mode, it is ok until i turn unit off then back on it reverts to 0 which means when you touch the throttle it wants to move, any ideas, Thanks.
Try doing this again and after changing the setting, back out of the settings by holding power and mode. Then the setting should save. If this does not work contact us at service@revrides.com . Safe riding!
Thank you REV Rides, solved my problem, 😎👍
That’s what I wanted too, really appreciate that detailed information, explained very nicely !
Bro love u u made my scooter work I did the kick start to 1 it wasn’t working and I got scared love u😭😭🥰🥰😘😘😘😘😘
Thank you so much, can’t wait to get one 👍
i bought now new one..but why not working the accelerator but the power is on .iys not running .can u help me whats the set up to accelerate again
It is possibly on kick start. If so, you will need to kick off i order for throttle to work. If you want to change that setting, P9 will let you enable/disable it.
Thanks, Bruh! I love my scooter! And you just made it a lot funner!
best tutorial so far ...Thank you☻
Great tutorial bro. How do I turn the flashing side leds off please?
I'd like to know how to turn them off and on
Hold the mode button for 3-5sec
Hello, from Colombia.
Is this screen and the entire scooter waterproof?
Does the scooter resist use in the rain? Here in the tropical zone, it rains a lot. And we want to know if they have damage when driving in the rain
Gonzalo Gabriel Gonzalez Cano I have an 8 and it says do not use in wet conditions,
but I saw a video of someone attempting to make theirs waterproof with some silicone or something
I want to try it out
Would be really nice if it was water proof out of the box
Yo también soy de Colombia, que tipo de scooter tiene? En general es mejor que ninguna las meta al agua ni siquiera en lluvia o charcos, siempre se terminan dañando aunque digan que son IP54 de resistencia al agua y polvo
Thanks you guys for your helpful information about sitting it’s helpful 👍
hi, im running two motors and another controller weith this, but I cant work out how to get the speed signal over to the 2nd hub, usually I'd take the signal from a 5v throttle, can this be done
They should read together
My battery on mine always says it’s fully charged any suggestions?
Make sure your P3 is correct for the voltage of your scooter. 48, 52 or 60
Hi, i have a question, when i enter the P settings and long push the on/off button, the letter ''A'' on the bottom left changes to the letter ''d'' And I wondered what it does... so if you know please tell me :)
any informations now?
i dont think there is any change with a or d
Ii have an Evercross H2 and ordered a compatible size and voltage as my old one. When I replaced the Battery and charged it up, It did not run as fast as before, Like 1/3 power was gone. Then I thought I would re install the old battery to see what the difference actually was and now It did the same thing when i reconnected it. I have two of these scooters so I compared the settings between both P settings and they are still the same. There must be another setting that was lost when the power was removed. Do you have any Idea?
my man, this was exactly what I was looking for but in my scooter I have a bluetooth icon and I have no idea how to enable it the scooter's model is the winner sky k5 explorer 3k watt
Is this the same on kugoo m4
what would make my ebike take off as soon as i power on the ebike without the throttle being engaged and the throttle dont work when i do engage it
How i can save the setting’s,mine allways from the start beginning?
need to know evercross h5 electric scooter any tips on changing speed..Great tutorial
Thanks for reaching out to REV Rides! Feel free to reach out to Service@REVRides.com for further assistance.
What does e 07 mean? If it’s flashing on the screen
Hey Adam, Error 07 is a motor fault code. I would suggest checking the wiring where is enters the motor at the axle. A fault in the wiring harness is more likely than an issue with the motor internally.
hi tnx for the guide. when i in the settings menu (p-settings) , and i long press the power button, the "A" in the bottom line changes to "D". do you know what is the purpose of this mode A/D ?
Can you please explain what p8 actually does? Limitation of power how and why if there’s another parameter for 1-5 setting for acceleration?
We are happy to help you with understanding the settings of the scooter. Please call customer service at 360-888-7433 for assistance
Hey mate solid video, my speedo isn’t accurate and I’ve done the wheel size to 10 and that’s all good but I’m going 30mph and it says I’m going 3mph just really confused done all the research but I can’t find anything. Thanks
May someone helpe you
Thanks for this information. May I ask if you can show how to properly lock the Evercrosss scooter H5. If you chose to not attach the seat. Also do the wheels need to be filled with air? Or are they solid plastic?
Thanks for reaching out to REV Rides! Feel free to send us an email at Service@REVRides.com for further assistance. Cheers!
is there a setting for battery percentage? I have a scooter with the same Indicator panel, I run about 25km still the battery indicator is still full charge, but then suddenly it wont start and i quess its low bat. is there a way to calibrate the battery bar or percentage?
Thanks for this video. For the Zero 9, is it possible to turn off the blue LED lights when turning on the regular lights?
At this time there is no option to disable the blue LEDs while the headlights are on.
Hi there , how long before an app like the xaiomi 365 has ? It tells so much useful info even individual parallel cell voltage . a xaiomi bms could be piggybacked and then many of the app functions will work.
Thank you so much for the video my problem is that despite changing it every time. WhebI turn off my scooter it just keeps resetting to its original settings how do I make it permanent?
Mines different. I don't have a p8 it just goes from 7 to 9 and I don't have a few others. It jumps to 99. Im confused
You may have a different LCD
Hello, my scooter only moves when I push it, can you help me
Hello please contact service@revrides for assistance!
Unfortunately I crashed and now its playing up. Just wondering if there is any way of reseting the controller.
How do you change it to see the speed in mph? Mine shows KM
I don't have P8 power level. But the P15 is 100. By any chance the power level is P15? Then again i don't have Cut off voltage. Kindly advise.
Hello. When I am not accelerating I slow down pretty fast. Is their a way to turn that off so I can cost with out using up power?
P17 set to 1 should set cruise control!
Thanks very much if you wanted to change the speed setting what would it be for 25km/hr or 15.5mph
Its tha same to X10 too ?
Yes but the setting will vary per scooter. Be sure to look at your guide for exact specifications.
Great info.....does this go for the blue jx-168 model
hey my zero 8 only charges max up to 4 out of 5 bars and =50.2V. I'm talking when the green light on the charging brick turns green. So is it blocked to max 80% charge to preserve the battery life?
Make sure and check your p-settings are correct
Number 8 Power Settings on my 11X only go down to 45.
It's still too fast on take off.
You have to go to P12 in settings and set it to 1,2 or 3. 5 is the fast take off.
Tried. these setting on a iENYRID M4PRO S+ and it does not work on every setting. Unless I did something wrong. Thanks
please the PAS is not working with this controller ? what is the reason , i used 3 different pas and not working , thank you
Cheers been wondering how to turn cruise control off it gets a bit sketchy at higher speeds
Hello thanks from your information I followed you but happen something zero 10x when I riding it go automatic pleas tell me how can settle that thanks a lot
Feel free to go to the website and click contact us and send us details
Hello, I got the same scooter-same screen, anyways I have a problem in which the underlights when turning on the lights get purple, green and blue. Any idea how to fix it?
Hey! Sounds like there's an issue with the backlight on your display. Usually the throttle ends up needing to be replaced, as the backlight is not repairable.
Thank you guys, very useful info in this video 👍
Does this video only pertain to yoo or ur brand of scooter?? Just bought an EVERCROSS H5. And only have like maybe 6 P-settings
I have a 60 volt scooter. It came set at 31.5. Do I wanna set it at 60?
It depends on what model and lcd you have
@@RevRides360 I see. Never mind. It’s Under voltage cut off to protect your motors from under voltage. If you let it rip while your 60v scooter is under 48 volts bad stuff can happen. 31.5 is a example the users manual gives. And I’m seeing riders setting theirs to 31.5. Their scooter won’t last long lol
@@RevRides360 I’ve had a lot of scooters, the Fieabor Q08p is the probably the best thing that happened to the scooter community, for $1300 the force behind this thing is INSANE
THe voltage setting.
I bought a used 10x that has the voltage set to 48. Does that make a difference? What is the diff between 48-52
My Zero 9 comes Friday. Do you set the LCD up to your recommendations before you ship it to me?
Yes, of course. We set the LCD settings for all of our customers. This video is to help you with some of the settings you may want to change based on personal preference.
Hello Tyler, thanks for the information. I have a Dualtron scooter with MR-100 throttle body. For some reason it just stopped working. Like a fuse was blown. Do these controllers have a replacable fuse? Or do I need to replace the MR-100. Thank you for your help.
would need to replace.
Hi Tyler, I changed my front tube on my Zero10x and refitted as per your video. Now the hydraulic front brakes are not working. I get a read warning sign top right on the LCD next to the gears. Any ideas how to fix this?
Hello i have my techlife x7s scooter and batery when was new i was going around 50 km.. Now i see how is drain faster now i can go only 40 km... I done on it 3700km..... So my battery gonna be more bad till it die or i will gona have only 10 km range at end?
How to reset all settings
Thanks for the tutorial. Very clear 👍
I would like to limit my Zero 10 speeds from gears 1=28kmh 2=45kmh 3=50kmh to 1=28kmh 2=35kmh 3=45kmh. Is that possible?
So how do i set a complete Max speed on my Zero 10X to a complete Max of 30 kmph no matter what gear I’m in?! I’m tired of having to manually keep the speed down with police around
Hello Rev Riders, hope everyones very well, just wanna ask maybe you happened to know about the default settings for Zero 10X, 52V, 23AH (P07 Number of magnets on the motor?) & (P15 what is the Cutoff Voltage? please let me know, thank you very much!
P07 = 28 magnets. P15 = 42V (some say 41V, depends on who you ask).
Thank you very much REV youre Awesome! more power to you guys👌👍👍
Thanks for the presentation. Is the electronic brake charging the battery?
Also do you know where to get replacement brakes. (Handle is soft)_
braking does not REgen charges
Thanx for the video brother..I replaced the battery for my scooter and the display is not reading that the battery is full....tested battery output..tested output from bms with different meters and it shows 58V but my display only shows 56V and capacity only shows 50%..Thank You
Thanks for checking out the video! for any service inquiries please send an email to service @revrides.com!
Mine does not have most of them it’s only a few of them numbers
the display for battery is only showing 2 bars but battery is fully charged can you help please any ideas thanks ?
Thanks man very helpful. Unlike the instructions
What is the 48v 500w rear motor electric scooter P15 voltage setting, please I changed it by mistake and now I don't remember.
39 Volts!
hello .. I have the FH100 model which is practically the same, maybe yours has some more functions. Have you tried to hold down only the MODE button? A blue spotlight appears on mine, do you know what it is for? thanks bye
Is lh-100 same as this what u showing?
What does it mean when u get an E 10 error on your screen? I have a brand new scooter, got not even a quarter of a km, and then got the e 10 error, the company is sending me a new throttle, they say this should resolve he problem, i hope so. I paid almost $3000 for a 1/4 km, that's pretty steep!! lol. I feel as though I already waited so long, now this!
Hey Todd. Please update me if you get this fixed. I have the same issue and it is proving difficult to get fixed.
Hi I try P16 to reset the KM nothing happen same KM show me it’s not 0 and now ?
Why my battery meter shows empty even when my battery is full
Help please
@@carlamor323 Hey Carl, I would check that P3 is set properly for your scooter. This is the nominal battery voltage (ZERO 9 = 048)
I just buy x1 pro v2 scooter but don’t know why can’t turn it on 🥺
The motor is not working on mine and I’m getting an E9 flashing with a caution sign on the controls. Any suggestions?
controller fault needs a controller or bad connection
What happens if you change the amount of 🧲 magnets setting??!!
Earth's Poles Will Flip.
IIISentorIII 😂😂😂
How can I make it auto gear 3 when i turn it on
when i turn it on it is always on 1¨
Unfortunately they are always set to 1
Ok:)
What is setting 20? Where can i find list of numbers and their meanings?
Thank god for this video🙌🏼
My scooter goes uncommanded when u turn it on and turbo mode and rake lights don't work
Wait, so does P08 allow to save battery and increase range (sacrificing aceleration, of course) by limiting how much power can be drawn or is it something else?
Is there actually any benefit of having kick start on or off? does it really make that much of a difference on battery life?
No but it will be sure the scooter doesn’t run away at a stop!
Hey Tyler, I just bought a Evercross H5 Scooter, I am a fairly large man, 250lbs. I can only get this thing up to 12 MPH. Is there anything I can do to increase the speed. I have heard nothing but good things about this scooter but so fair I am disappointed. Thanks for anything you could recommend!
Hi, I’m trying to decide which scooter to buy. I like the Fiebor QO6. But it’s a kick to start. That’s a deal breaker. Do you know if I’ll be able to change that in P settings? Ty
Can you teach me how to install ignition key with volt meter please.
Hey
ive tried to change the settings
but the mode button seems not to be working on setting mode.
i cant change anything, only scroll threw the menu
What is the letters and numbers on the front of your LCD screen. Should be QS-S4 or TF-100.
Please hero x8 setting p15 voltage 40.41.42 ??? Someone has sabotaged the settings
Scooter 52v23a
Controller 52v cut voltage 40v
My scooter has a code that allows you access the P settings. Simply pressing the 2 buttons doesn't do it. I got the code , but once I enter the digits it doesn't automatically go to P...not sure what I am supposed to press next
Feel free to reach out to us at Service@REVRides.com for further assistance!
I was going to my friends house and when I was going to my friends house, my scooter died right in the middle of the street and I was walking at home. And I cannot even find the battery level because when I turn on my scooter, it’s always fully charged, but it never decrease,