I think you are underestimating your followers interest. I for one would enjoy seeing how you'd fabricate vent covers on the goose, carpeting it etc. After following you for years, I think we are all more interested than you realize. Also, would love to see more Dyno runs, 1/4 miles and 'filmed on a private road' power runs!
I made something similar for my fox, Only difference I made like a open C on the driverside so I can get under there with a creeper. I did by using 1inch angel across driverside pinch weld then ran gussets from the angle down to the wheel posts.
My only question is are you going to put lights on the Bibster front? I love the looks of the car design but if you were to go to a cars and coffee, or a car show. I think lights would look cool!
Those casters hold more than 300lb lol. I bolted a few to the front frame rails on my 37 Plymouth 2dr sedan to roll around my shop lol I used to use home depot orange flat carts to move bodys. I built some stout 1.5x1.5 C channel dollys with those 3" steel casters from home depot. No issues rolling 4klb cars around. The harbor freight ones lose bearings if u hit a pebble...
Thanks for the updates on everything and Happy New Year to you and your family. The front suspension on the Bibster is definitely different, how did it work out driving it.
This probably isn't your vision for the bibster doors, but I feel like with everything else you've done with the car less is more for the doors, so just make them fit on the outside and maybe do some bead rolled sheetmetal door cards that mimic the stock look but from metal
Do you have a CS degree? I know you do something in IT. I’m going back to school to finish getting my cs degree, I have been learning python. I’m just curious the route you took or if you have the degree.
I think you are underestimating your followers interest. I for one would enjoy seeing how you'd fabricate vent covers on the goose, carpeting it etc. After following you for years, I think we are all more interested than you realize. Also, would love to see more Dyno runs, 1/4 miles and 'filmed on a private road' power runs!
You are probably right
Grandma would be proud of her C10 , nice job on the dolly also 😍
I hope so! Thanks
Man I’ve been watching since the black pearl, I like the different projects and will watch what ever you post
Sure do miss the Friday tool reviews. Sweet car dollie .
Me too....dont have any new "good" tool to review
What we really need are driving vids, launch vids, highway roll on vids, burnout vids. The payoff vids for all the vehicles really. :)
Noted
Second this
Awesome as always. Listened while I did work. Thanks for sharing!
Love your Videos, learn some great Idea's 👍
Glad to hear....thanks for watching
Hey mate with a shop that big it only makes sense and easier on your body to work under a car hoist/lift.. good job on the videos.
Yeah, you are probably correct. I just hate having space dedicated
Fairly new subscriber but really like the channel. Nothing wrong with jumping around on projects. 👍🏼
Welcome aboard!
Thanks for what you do....
Quick build brother nice work
I made something similar for my fox, Only difference I made like a open C on the driverside so I can get under there with a creeper. I did by using 1inch angel across driverside pinch weld then ran gussets from the angle down to the wheel posts.
yeah some under car access would be nice
Sweet. Great job as always
thanks
Great job. Looking good 👍👍
Thanks 👍
“Not video worthy”
You’ve underestimated my desire to learn everything
lol
My only question is are you going to put lights on the Bibster front? I love the looks of the car design but if you were to go to a cars and coffee, or a car show. I think lights would look cool!
yeah. I actually have some old school hot rod lights for it, just not sure I like the look
Very cool, I want to fab this for a 84 vert I'm doing. You think those wheels would support with rear and trans in but engine out?
They should
Those casters hold more than 300lb lol.
I bolted a few to the front frame rails on my 37 Plymouth 2dr sedan to roll around my shop lol
I used to use home depot orange flat carts to move bodys.
I built some stout 1.5x1.5 C channel dollys with those 3" steel casters from home depot. No issues rolling 4klb cars around.
The harbor freight ones lose bearings if u hit a pebble...
yeah I remember when I purchased them to made sure they could hold a lot but couldn't remember what it was when making the video
Have you thought about making your own hood saver, brace under the hood so it doesn't get bent when you shut it? On your C10 of course.
I have
Thanks for the updates on everything and Happy New Year to you and your family. The front suspension on the Bibster is definitely different, how did it work out driving it.
It did awesome
If you have scales, could you weigh the coupe the way it is?
I don't have any scales....let me see if I can find some
what brand are the shop roll up doors?
not sure
This probably isn't your vision for the bibster doors, but I feel like with everything else you've done with the car less is more for the doors, so just make them fit on the outside and maybe do some bead rolled sheetmetal door cards that mimic the stock look but from metal
why did i hear welcome to the Fap Forums?
also nice vid
Let's see some videos driving the cars in the spring, really gives the payoff on the project.
I will work on that
Do you have a CS degree? I know you do something in IT. I’m going back to school to finish getting my cs degree, I have been learning python. I’m just curious the route you took or if you have the degree.
I dont
You should do some suicide doors on the Bibster
Can you build a Urbana 500 from transformers prime please please build it
It's a Friday video and no Friday fool lol gonna fix that chunk missing from the roof of bibster
yeah I need to fix those parts
Did you mean EX brother in law???
Man you need new gloves 😳
Yeah I wear them out....I actually keep several pairs in stock
WEARING YOUR CAPS BACKWARD DONT HELP YOUR EQUEPMENT SUPORT YOUR CHANNEL. 😠