Indirect Bonding: Tray Fabrication for Resin Models
HTML-код
- Опубликовано: 11 дек 2021
- This is a fast and simple 2 tray indirect bonding method using a resin 3D printed model.
Materials needed:
-Resin models
-Any bracket system
-Blockout resin
-Bonding instrumentation
-Buffalo knife
-Ministar vacuform matrix machine
-1mm mouthguard material
-030 Essix material
-Cooking oil spray
-Microetcher and 90 micron aluminum oxide
-Lab hand-piece
-#9 dental instrument
-crown and bridge scissors
-sharpie marker
That's a good idea👍
Great video. What do you use for model separator prior to bracket placement?
Thanks! With resin models you will have no need for a separation medium.
So David,there is no seperating medium between model and bracket? also,what resolution do you print at?As this will help with the brackets removing from the model.
Separation medium is needed when using stone models so the composite doesn’t break the cast, fortunately this problem doesn’t exist with printed models and you don’t need it.
I print at 0.08mm, but I know other who will print as thick at 0.17 and have perfectly acceptable results.
Can you write for me everything you just explained lol jk.
I have an essay to turned in on the fabrication, placement ,advantages or disadvantages, materials , instruments, techniques and errors of indirect bonding😩😩😩😩🤯🤯🤯