I have set up both my CP2000 and Rl1100 off this video and your explanations have helped so much. I am in AZ and think your in Vegas sometime if I am in town i would love to treat you to lunch
i noticed as you were adjusting the seating depth you allowed the die body to turn down as you were adjusting the seating stem , you should always lock it down before you start adjusting the stem to prevent this from happening.i thank you for spending so much time showing how to set up the rl1100 . your video really helped me set up mine
you shouldn't have to adjust it, check it with calipers and make sure its in range .002 - 009. i made a video on 9mm to .45 acp i go over it a little more at the very end
I use www.frankfordarsenal.com/case-preparation/case-trimming/platinum-series-case-trim-and-prep-center/903156.html. I like it it works really great. If you have any questions let me know
great video men I'm really looking into getting one of this dillon 1100 but obviously idk what I would need to get started lol. What parts would I need if was wanting to reload 9ms and 223/556, any suggestions or parts list? thank you
@@alvinjayv5829 so i would start with a reloading press, i jumped right into the dillon RL1100, i got it in 9mm so it came that way, you need a reloading book, i recommend modern reloading by richard lee, i have the second edition, i also recommend western powders handloading guide. I ordered the Mr bullet feeder as well, also got the RF 100 in small pistol primers, you can do it the old fashion way with a “primer flip tray” to start. You will need calipers, I got VINCA DCLA-0605 from Amazon, you will also need a scale, I got the AWS gemini - 20 from Amazon as well, then you need a bullet check gauge to make sure they will fit into a chamber, I got the Armanov ammo checker block. Powders are up to you but for my 115grain copper plated i like HP-38 and Accurate #2. I like Accurate#7 and for my 124grain and 165grain copper plater. Hope this help a little bit
@@wallas0786 awesome brother thank you so much I really appreciate all the info. I guess I'll start from here, and I'm guessing from this setup and i can just slowly get different die sets for different calibers right? thanks again!
I have set up both my CP2000 and Rl1100 off this video and your explanations have helped so much. I am in AZ and think your in Vegas sometime if I am in town i would love to treat you to lunch
i noticed as you were adjusting the seating depth you allowed the die body to turn down as you were adjusting the seating stem , you should always lock it down before you start adjusting the stem to prevent this from happening.i thank you for spending so much time showing how to set up the rl1100 . your video really helped me set up mine
Thanks for this video just got mine yesterday!
Ive watched all your videos with the RL100, but the most impressive thing Ive seen is your Toyota Prius.
Haha yeah and thank you
Can you update the Reloating innovations link please?
Did I miss why there isn’t anything for the primer station?
you shouldn't have to adjust it, check it with calipers and make sure its in range .002 - 009. i made a video on 9mm to .45 acp i go over it a little more at the very end
How are you processing your brass? Specifically trimming.
I use www.frankfordarsenal.com/case-preparation/case-trimming/platinum-series-case-trim-and-prep-center/903156.html. I like it it works really great. If you have any questions let me know
Which Go/No Go primer pocket gauges are you using? Nice video, thanks for sharing!
Thanks bro I appreciate it.
ballistictools.com/store/small-and-large-primer-pocket-gauges
@@wallas0786 Thank you. I had seen those but weren't color-coded like yours were... Thanks again!
@@patrickrogers3577 i did that with a sharpie they don’t come like that, im sorry for the confusion
@@wallas0786 ahhh perfect, great idea! Thanks for clarifying and keep up the great vids! Really appreciate the follow-up!
looks like Wilson
great video men I'm really looking into getting one of this dillon 1100 but obviously idk what I would need to get started lol. What parts would I need if was wanting to reload 9ms and 223/556, any suggestions or parts list? thank you
Would you be starting from scratch?
@@wallas0786 yes
@@wallas0786 I was trying to find what parts I would need online but couldn't find any, hoping someone would be willing to give a me list what to get.
@@alvinjayv5829 so i would start with a reloading press, i jumped right into the dillon RL1100, i got it in 9mm so it came that way, you need a reloading book, i recommend modern reloading by richard lee, i have the second edition, i also recommend western powders handloading guide. I ordered the Mr bullet feeder as well, also got the RF 100 in small pistol primers, you can do it the old fashion way with a “primer flip tray” to start. You will need calipers, I got VINCA DCLA-0605 from Amazon, you will also need a scale, I got the AWS gemini - 20 from Amazon as well, then you need a bullet check gauge to make sure they will fit into a chamber, I got the Armanov ammo checker block. Powders are up to you but for my 115grain copper plated i like HP-38 and Accurate #2. I like Accurate#7 and for my 124grain and 165grain copper plater. Hope this help a little bit
@@wallas0786 awesome brother thank you so much I really appreciate all the info. I guess I'll start from here, and I'm guessing from this setup and i can just slowly get different die sets for different calibers right? thanks again!
Where did you get the those lock nuts for the 223 dies?
I got mine on Amazon but its these leeprecision.com/ultimate-lock-rings-3-pack.html
Thx