Latest Update for Sega Model 3 in Batocera
HTML-код
- Опубликовано: 11 сен 2024
- With Batocera 35, Sega Model 3 went through a change that has made emulation gaming so much easier and faster. This video will give you a brief tutorial on Sega Model 3 emulation in Batocera as well as explore the new change along with some tips and suggestions to get the most out of Sega Model 3 emulation.
Link mentioned in the tutorial:
archive.org/
#Batocera
#BatoceraNation
Our Discord:
/ discord
Our Website:
www.batocerana...
My Batocera Systems (Amazon Affiliate):
amzn.to/2UjRMZy
amzn.to/3hur3kI
Product review of both systems above:
• The Battle of the NUCs...
Our Retrogaming Store where you can purchase T-Shirts, Hoodies, Crewneck Sweatshirts, Long Sleeve T-Shirts, Baseball T-Shirts, Masks, Mugs, Pillows, Totes, Tapestries, Pins, Phone Cases, Stickers, Magnets, and other merchandise featuring retrogaming.
www.teepublic....
Thanks. The Ambulance game is a blast, lots of fun.
Thanks for the video! Blessings upon you and your dad. Hoping for continued healing!
👍
And again, big congrats on 20 000 subs.
Hello!
Do you know if you can add and play Taito Type X to Batocera, there are a couple of versions, having them on Batocera would be a blast.
I would love if that was added it would be awesome
In regards to the steam deck, Im currently on 35 from the main website, but I see you have a 36 beta on Batocera nation. Is there a big difference? How would you go from 35 to 36?
I get the same message for the network and etc in daytona 2, but entering 6 or 7 or control F1, F2, F3 doesn't make it go into test mode to select the single or deluxe cabinet and get around the network issue. On the Star Wars triology it doesn' even load to main screen before I get a message "WAIT SETUP THIS FEEDBACK LEVER." then after a few seconds it comes back with " FAILD FEEDBACK LEVER INITIATE, POWER OFF AND RESTART THIS SYSTEM". Not sure if the roms are no good or if there's some workaround I'm not aware of.
I have an issue,it seems the game run at 60hz but the game is in half speed on raspberry pi,like the game was duplicating frames any help to fix this issue? Im using batocera 39
still no option to change the steering sensitivity?
racing games are unplayable that way.
Yeah! Thanks man
I've managed to calibrate Star Wars Trilogy with the help of a mouse: Using the mouse, set both "centered" values to 80, then press 7, then carefully unplug the mouse (without moving it, or else the values will get screwed up). Move the left analog stick all the way around and press 7 again.
My only problem that's left is that the analog stick auto-centers way too fast. I can play the game just fine with a mouse (and indeed I have set it up on a Windows-based cabinet to play with a light gun) , but with an analog stick it's unplayable.
Is there any setting to disable the auto-centering?
I'm new to emulation, when I download the rom set and try to unzip it says there are missing files so it won't unzip
update to Batocera 36 and some games are no more. I check the gamelist and they appear, but in Batocera nothing. Any solution? thks.
What is the beat-em-up game you start the video with? It looks awesome
Spikeout: Final Edition
@@fonzitheman thanks fam!
Thanks for all your posts they are so helpful including this one as I had never heard of this one....One thing I still have a problem with is when I run psp stuff all my settings never save e.g controls ...any ideas...
I’m lost. Im running batocera on an external hd from the same pc that I’ve saved the time to. I have to boot from the external hd and this doesn’t show me how to access anything I’ve saved to this pc while in windows. When I boot batocera, how do I access files I saved on the same pc it’s running on? I can’t access any folders from the pc, only what’s on this HD with batocera. Please help with this if you’re still around?
You mean how to access the windows drive while in Batocera file manager?
Look for attached drives while in Batocera file manager, it might be called 'no label' or something else, once found then navigate to the files you wanna copy over to the Batocera share folder.
If no extra drives show up though, try rebooting a few times until it does.
If it still doesnt show then I dunno.
*It's too bad: I can get Sega Model 3 games to work with a gamepad, unfortunately, they're unplayable with my arcade stick* (I've installed Batocera on my arcade machine).
Whenever I move my arcade stick (in Star Wars Trilogy Arcade for instance), I go STRAIGHT to the edge of the screen (otherwise, it stays at the center of the screen).
I remember Star Wars being VERY picky on the calibration test. Follow the text exactly as written. This might holding and not releasing the final directional input. I can't recall exactly this was about two weeks ago.
@@wuushew don't have much hope, but I'll give it another try (Star Wars Trilogy is one of the only game missing in my arcade machine)
Remember we want the in game calibration test independant of anything the model 3 emulator itself is doing. I will test Stars Wars when I get home to confirm.
will my dolphin bar still work with wiimotes if updating to Batocera 35?
Hy!!!!! How can i put in fullscreen????? I have batocera 37
Hi everyone! I'm new to Batocera and wondering how you delete a game system with its games on the steam deck Batocera. Thanks.
What Theme are you running ?
Thanks for this video. I can play most games but cannot exit out of them.
Any tips on that?
Hotkey and start doesnt work?
@@fonzitheman Turns out Hotkey and Start isn't working for any games. I upgraded to Beta 36 a few days ago, maybe that's the cause.
@@pittsburghgeo
Should still work. I use the beta on a sep test build.
Try the map controller option setting and set your. hotkey there too.
@@fonzitheman Will do, thanks
@@fonzitheman I reset everything with controllers and it now works as normal. Thanks
can you play the lost world 2 player now with a dolphin bar and wiimotes?
А у меня Sega Model2/3 на Batocera почему-то не запускается ( тестировал на Steam Deck )
can you do a video on how to install ps3 dlc, i tried to do it myself but it just doesn't work
Can you please please make a tutorial to fix new super mario U for wiiu crashing I cant find a tutorial
Thanks man! What’s the name of that theme?
Looks like RVGM I think
Edit: Could be Hypermax+
@@fonzitheman Thanks
It's called Hypermax v8
Can I ask what theme you're using? It looks amazing
It looks like a version of Hypermax plus
Its not available to download within Batocera so youd have to download it elsewhere and transfer it over.
I believe it may be a pay theme as well
I found the theme. It's on internet archive. It's called hypermax v8
@@DragonKing_V Awesome, cheers for the heads up
I use a I5:3570 and a Radeon hd 4830 for Batocera and can't for the life of me get model 2 and 3 to work. Model 2 freezes Batocerawhen trying to run any time, and model 3 just keeps going back to es.
You're trying to emulate demanding systems on the relatively weak and old hardware. That 4830 could easily be the reason. Haven't checked the mesa driver changelog, but I bet it's pretty much on a legacy life support by now. Enjoy those other million games you can run perfectly well instead.
Where can we get that theme??
I thinks its the RVGM theme, downloadable within Batocera themes.
Its quite customizable, so you can change the layout, system as wheel, as a list, on the right, on the bottom etc.
If youve installed it try theme cfg option and experiment.
@@fonzitheman no, it's not RVGM. It looks like the Hypermax Plus+ V.9 theme, which is not in the list of downloadable batocera themes. So, where can we get that theme?? Lol
@@richarddukard8989
Looks like that one you may need to pay for.
Checkout arcade paradise by Hursty in Batocera, very good and very customizable
Hypermax v8
Hi
are you running batocera on PC or Raspberry Pi ?
He would be doing this on PC.
Im not sure Batocera on Pi supports Model 3.
You only need to check if your Pi (Im presuming you are asking cause you are using a Pi) has a model 3 roms folder, if not then its not officially supported.
@@fonzitheman I have loaded some MODEL3 roms in its folder, but on a Pi 4, it's far from working properly. Everything is slow motion !
@@RelaxMax-fj8hd
OK, I guess its not powerful enough?
Not sure what else it could be.
@@fonzitheman as model3 games are that slow on the strongest Pi 4 (8 Mo), I can deduct they should be running on a PC
@@RelaxMax-fj8hd
Yeah, model 3 are running fine for me on PC.
Smooth as butter??? It's very very good. But, It's not smooth. Pushing 6 or 7 then press whatever is not cool. I know it will get better
that's nothing to do with batocera, it's what you do with the sega model 3 emulator. Similar to pressing TAB in MAME brings up the custom MAME key layouts and you can then set the DIP switches for each arcade game.