New Blynk IoT platform with esp32 | how to setup automation in Blynk IoT app |
HTML-код
- Опубликовано: 20 июл 2024
- Hello Everyone!
I have come up with the new Series based on the all new Blynk IoT platform.
In this video what you will learn about?
1. How to configure the new Blynk IoT Platform.
2. How to create the template in Blynk IoT Platform.
3. How to create the data stream in Blynk IoT platform.
4. How to create the web dashboard in Blynk IoT platform.
5. How to add device to the template.
6. How to configure the Mobile dashboard.
7. How to set up the Automaton in Blynk app.
You can watch my previous series videos based on Arduino IoT cloud Platform
1.Getting started with Arduino IoT cloud | Arduino IoT cloud with Esp32🔥 #arduinoiotcloud #esp32
• Getting started with A...
2. Home automation using Arduino IoT cloud | controlling relay using Arduino IoT cloud #iot #iotproject
• Home automation using ...
3. Soil moisture sensor with Arduino IoT cloud | IOT Smart Plant Monitoring System #iot #esp32
• Soil moisture sensor w...
4. How to send sensor data from Arduino IoT cloud to Email | webhook & IFTTT with Arduino IoT cloud #iot
• How to send sensor dat...
5. Sending sensor data to google sheet using Arduino IoT cloud | log sensor data in cloud #esp32 #iot
• Sending sensor data to...
Arduino IoT cloud Platform
⌚️ Time Stamps ⌚️
00:00 Introduction.
00:28 How to create Template.
01:22 How to create DataStream.
04:36 How to create Web Dashboard.
07:34 Adding device to the template.
08:18 Configure the Mobile Dashboard.
10:34 how to setup the Automation.
13:27 Setting up Automation in mobile app.
17:11 Circuit diagram explanation.
18:13 Coding explanation.
20:59 Dashboard is in action.
21:30 Automation is in action.
You can connect with me on
Facebook : impulsetech101
Instagram: impulsetechy
Linkdin: linkedin.com/in/yogesh-bawane
Linkdin: linkedin.com/company/impulse-tech-robotics
Blog : impulsetechx.blogspot.com/ - Наука
Happy Evening sir! This is one of the most excellent videos I have ever seen so far. Keep it up, sir. Great, keep going and add more videos of this kind. Thank you.
Thanks a lot sir your words mean a lot to me❤️
Many thanks for this video continue! Top.
Your welcome ❤️
If i have to design a gps tracker using node mcu esp8266 what should i put on datastream ? Help please
Very well done, keep it going.
Thank you very much
Sir, the work done in mobile could not have been done in the dashboard?
my blynk device is showing that it is offline but it is showing that it is connected, what should i do sir. PLease reply.
this video is useful for me, please make a video with a fan instead of a potentiometer. thanks😊
I will try bro
nowadays I am a bit busy
Thanks a lot
@@ImpulseTech I will keep waiting for the video on this channel and I have subscribed to this channel
@@aguslukmanh2454 thanks man
Thanks a lot, such a useful video !!
Thanks a lot
hi sir..i follow all of coding why it shown expected unqualified-id before '{' token, im try delete (.. but it not working..please help me sir
@@shahrulnizam1478
Let us know how your code looks like and we might help you
thank you
Your welcome 🤗
Good explanation Not show automation tab .what is the reason
There is no “expose to automation” option available for me. I saw you sir replying the solution but I didn’t understand. Thank you 🌹
you are right i am also not able to find that expose to automation option i guess may be problem from blynk side i need to check on this. i will tell you the process that i use to follow
First thing you need is to tell Blynk which Datastream can be used for Automations.
Go to Template -> Click Edit->Datastreams tab.
Open Datstream Settings by clicking on its name
Expand Advanced Settings option
Turn on Expose to Automation switch
Enable Available in Conditions below. This means that values from this Datastream can trigger Automation scenario.
you can find it upside, where the "datastream" label lays, on your right it says "automation", and right there you have your Virtual pin, then you click on edit, and you can follow the video
@@RichardRCaves Correct. thanks for your comment
@@RichardRCaves thanks 🌹
أهلاً وسهلاً ومرحبا بك-يتعذر الاشتراك ولا يوجد جرس-يتعذر الاستجابة لكل طلباتك-يتعذر التعليق- لا أعلم .
how to write Arduino cord on blink
sir, what am i gonna do if the esp32 saying no matching function for call to BlynkWiFi begin char 14 , char 9
how can you say that when this jerk can't even speak English
SIr, please make a the same video using Node MCU with ultrasonic sensor.
Thanks a lot for your suggestion
What is this "SIR" bull shit?
Very good video sir !!!
Thanks 👍❤️
Bull shit, the guy can't speak English. Are you paid for your testimony
need in urgent please help me out with this problem
Sir what happen if we upload the same code to nodemcuesp8266 in iot smart form project
please Reply sir
It won't upload you need to write separate code for esp8266 that is node MCU .
You can get sample template from Blynk example browser
Thank you for replay sir
if we select new template hardware as Esp8266 in blynk cloud platform
then in the code if we replace in the place of esp32 as esp8266 then its works sir
Just copy the template for esp8266 and modify the code accordingly.
Means copy and paste code from Esp32 code
Thank you sir for reply
@@jsramesh8219 your welcome ❤️
Do like share and Subscribe the channel 😀
hi, where is the code?????
Is there no automation by website? I have a White Plan Blynk but there is no options for automations
You will get the automation option once you enable it in data stream .
You need to expose your data stream for automation sir.
Still you not get it please let me know sir ❤️
@@ImpulseTech without the mobile app just on website right?
@@thenextproblem8001 yes sir that's correct
@@ImpulseTech ok i will try asap. One more thing, how can i count a push button on Blynk?
@@ImpulseTech tnx for your help btw
sir can you help me with the ph sensor , turbidity sensor ,temperature (ds18b20) works with esp32 and blunk iot need the combine code
Sir how to I can build with Ethernet connection type for home automation ?
Hello, do you have a link to the code somewhere?
You played well for the fans, but where are the codes? You have tired yourself for no reason.
Please
How many devices esp32 connect to one blynk account sir ?
For free Blynk account you can connect 2 i guess
this guy is a phony
Please
Please
Please
Please
What do you want to say can you elaborate?