Toyota Gen3 transfer box front shaft oil seal leaking. Full Video
HTML-код
- Опубликовано: 12 сен 2024
- Hilux surf generation3 KZN185
KZN130, 1KZ-TE
Tacoma
Tundra
4runner
Prado
Landcruiser
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co....
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co.uk/shop/davesterl
I can't seem to get the castle nut off. I have unstake already and even cut a slot in it. I'm only using a 24" breaker bar and even a hammer and a jack but the nut just won't move. Can any one help me?
One the easiest lads to listen to every came across,very informative the way he goes through each step
I used this to help my mate do this on his 1996 Land Cruiser Prado, it's a brilliant guide. Many thanks for taking the time to make this video.
Thanks Dave - it was well worth the watch mate. Excellent explanation of every step. :)
Your very thorough on your work and I can appreciate that. 👍
Thanks for watching
Harley Splicer...no...Steve Harley & Cockney Rebel...Yes! Very entertaining & informative as usual...Cheers Dave & Thanx.
hey ian, ahhh good music when it was good.
Just a suggestion and I don't mean to be a dick but just to suggest you clean the outside of the driveshaft spline as you squeeze it down so as not to deteriorate the seal. Great video and you are a true Craftsman. Cheers and have a great day!👍
Cheers did that off camera
Love me an Ulster accent. Greetings from Australia.
Eeeeyyyyooo, u got it cheers dave
@@davesterl Yeah mate used to live in Belfast few years ago.
Well explained and it showed patience
Excellent walk through, very well detailed.
Nice work mate, lots of helpful information... Harley splicer that’s new for me and Now I know 😊😜👍👍👍
I was dreading changing mine, i thought i had to drop the case outta the truck and that it was lots of hassle. This doesnt look too bad at all.
Great video - thank you!
Thank you so much I appreciate you sharing your knowledge
Your welcome Jacob
I’m an amateur mechanic, just basically do all my own servicing , broken springs , and things like that , what would you recommend in the ways of torque wrenches , the clicker, or the electronic...... btw another video enjoyed and liked 👍
norbar are the rolls royce of torque wrenches, depends on your budget, ive found the clicker type are easily misread at higher values so i have an electronic to eliminate that possibility, if only occasional use then look at teng for a decent product at reasonable money
It's been a long day, but why wouldn't you just put the transmission in gear and select low range then torque to 118 Nm? That torque level is nothing compared to engine output.
Excellent
Can anyone provide the part numbers for the seals for the front transfer case seal?
Dear, last week we went on off road by Toyota 94 kz. From start their was was smell of burning. But after 36 hours of hard taraian when coming back we noticed a leak under the auto transmion. It was late night luckly we found a shop to got two bottles of oil. He told that the pipe is burned by exhaust pipe so fill n reach home.
I want to know how it happened. Now what to do???. Thanks Sir with your expert advice.
Hey mate, what workshop manual are you using for this vehicle?
Good video. Thanks.
😢 I don't know where else to go. NO mechanic could figure out my problem. I know this the only place that has the answer. I have 98 4runner with 140k, which I gave my son to use. Recently, the car shutter around 50 mph, it feels like it's searching for gear (going up and down shifting) but I know it's not a transmission issue. Only a few think that I can detect, the tranfercase has a front drive shaft seal leak, probably half of the fuild is gone. And the other was a recent front brake pad change. Clicking sound is heard on driverside drive axle spinning it, car shakes around 60-70 after brake change. PLEASE can someone give me some pointer on where to look. Thx u.
I have the problem of that output shaft bearings making sound. Has anyone tried replacing it by removing it without taking the Tcase ?
Would putting the t case in 4wd keep that yoke from turning?
Yes. You want to turn it to get to each bolt
Thanks a lot!! How about RTV sealant?
What about RTV sealant?
@@davesterl no criticism, just believe ppl usually put some on before putting back in the shaft to seal the splines. Unless you mentioned it and I missed it.. Thanks for video 👍🏻
@@davesterl rewatched since I'm doing this today. I see now there is an inner seal to prevent gear fluid from leaking out between splines after. Would you recommend a small amount of rtv anyway?
Also I am going to attempt to pull the seal without a seal puller (have one on order). Any tips on home made tool? I think I can fashion my own dental pick style..
when i changed the transfer case seal on my 2000 all wheel drive land cruiser ,when i turn the rear wheel jamming or lagging when i go straight it goes fine . do you know what could be the problem
Did you ensure you lined up the flange and the drive shaft?
Is the thread in danger of damage zipping the staked nut off with a mini gun ?
Lol.... harley splicers, I haven't heard that in 25 years... 😃😃😃👍👍👍👍👍👍👍
that was especially for you johnny, thought you'd like it
@@davesterl cheers m8...
Do u know what’s the part number for that seal ???
Sorry no, llok up roughtrax. Co. Uk
Had a look on website there closed
@@two_stroke_or_broke9297 the country is on lockdown
1st BOOM
bodgit and leggit garage Leon....you are always coming first.....😂😂
bodgit and leggit garage Leon....you are always coming first.....😂😂. You're as wet as that seal was.....lol
@@JohnnysSpeedShop 😋😋🤣🤣