Tay! This was so helpful!! I needed to know about the Cloud Cover, too. What size is your Supa clips? I know the 40 is too small. Are you using a 60 or an 80? Again, thank you so much this was the best 20 minutes I have spent on RUclips in a long time.( I am in the newbies MB7 group and I always watch for your comments.)
Thank you so much Brenda, I tried to respond on the post but comments cut off. Yes I use the 60. Thank you for watching, I need to start back making videos, some ppl are like me and a visual learner. And there isn’t a lot of mb4/mb7 videos out so I try to help
any tips on using the durkee ez frames for thick hoodies? i'm having issues with thick hoodies and mounting the frame to the arms. there isn't enough room on the sides of the frame to slide in, and not enough space on top either where the frame meets the arm. thin hoodies can slide in okay...have you used durkee ez frames with thick hoodies/sweater before?
Which machine do you have? Have you tried to do the hoodie upside down? Like don’t put the hood towards the machine? Put it away from it, and then rotate your design
@@kml3r i have the brother PRS100. i have tried it with the hoodie upside where the bottom part goes in first. the problem is, the hoodie is thick, and the sides of the ez frame doesn't have enough room to attached to the ez "arm frame". the gap from the ez frame and the arm frame is too small so the hoodie. maybe i can take a photo later and show you what i mean. i just don't know how i would embroider a thick hoodie using the ez frame...
I bought these for my Barudan and can't figure out for the life of me how to use them. I've used ff on my brother for years but it's not flush with back frame 😔 so the needles keep hitting the frame 😭
Wonderfull! Thank you! You have made this much easier to understand. I now need to fine Cloud cover/ Your video is so helpful.
You're very welcome! I got mine from Amazon
I love how you get right to tutorial 😊 my durkee is coming soon
Thank you! This is very helpful! Your sweatshirt turned out beautifully!
Glad it was helpful! Thank you for your kind words ❤️❤️❤️
I got the Durkee EZ system as a early Christmas gift!!! I can't wait to start using them!
Thank You so much for showing all the steps. Now I now what I might have left off.
You are so welcome!
This was very helpful. Thank you!
Great tutorial! Thank you!!🎉❤
You are so welcome! Thank you for watching
Tay! This was so helpful!! I needed to know about the Cloud Cover, too.
What size is your Supa clips? I know the 40 is too small. Are you using a 60 or an 80?
Again, thank you so much this was the best 20 minutes I have spent on RUclips in a long time.( I am in the newbies MB7 group and I always watch for your comments.)
Thank you so much Brenda, I tried to respond on the post but comments cut off. Yes I use the 60.
Thank you for watching, I need to start back making videos, some ppl are like me and a visual learner. And there isn’t a lot of mb4/mb7 videos out so I try to help
Yes, I saw that. SMH. Thanks for the answer!
You are very helpful.
Hello, thank you for sharing, I need within your possibilities how to get the super Clips. Thank you. Blessings
Hello, I got them from amazon.
I put the link in bio.
Excellent tutorial. Thx
any tips on using the durkee ez frames for thick hoodies? i'm having issues with thick hoodies and mounting the frame to the arms. there isn't enough room on the sides of the frame to slide in, and not enough space on top either where the frame meets the arm. thin hoodies can slide in okay...have you used durkee ez frames with thick hoodies/sweater before?
Which machine do you have? Have you tried to do the hoodie upside down? Like don’t put the hood towards the machine? Put it away from it, and then rotate your design
@@kml3r i have the brother PRS100. i have tried it with the hoodie upside where the bottom part goes in first. the problem is, the hoodie is thick, and the sides of the ez frame doesn't have enough room to attached to the ez "arm frame". the gap from the ez frame and the arm frame is too small so the hoodie. maybe i can take a photo later and show you what i mean. i just don't know how i would embroider a thick hoodie using the ez frame...
@@TheAwesomeSam yes please show me a pic you can inbox me on Facebook if you use #sewlucky my pic and page can pop up
Thanks for sharing! What size are those pins I got ones at Amazon and they are too thin for my Durkee EZ frames .
Hey I got the 60, the 40 ones are not wide enough
Great video! Helped me a lot! What is the name of the tiny iron please?
Thank you! It’s a mini cricut
Great information
thank you !
I bought these for my Barudan and can't figure out for the life of me how to use them. I've used ff on my brother for years but it's not flush with back frame 😔 so the needles keep hitting the frame 😭
Are the clips reusable? Pretty neat
Yes they are. I’ve had them over a year and they are still in great shape
What is the stuff you ironed on to cover the inside ?
It’s cloud. Cover so that the thread or stabilizer won’t irritate the kids skin
Where do you get your clips
Amazon, link in bio
Do you ever have issues with puckering?
I have not had any. I make sure the shirt is tight
What font did u use
I used Georgia font, I put the direct link in the bio, it’s from Etsy