Thank you for explaining that the modifcations move the power band higher up in the rev range. This is important if you are charging up sand dunes, or just looking to go faster, quicker, and that the stock engine is better suited to "tractoring around" offroad. Very helpful information in determining what you want your TW to do!
Dude, that is crazy good gains that you can get out of the bike. I like how you explain what will the outcome of the mods will be. Of course it will get worse mileage, but like you said, if you are looking at these mods, fuel shouldn't be a concern! Thanks for bringing out what all the TW folks have been asking for over the years!
Dont know why your video showed up on my feed but I thought it cool your shop is in Batesville AR where my family is from...in fact my great grandfather was one of the original settlers in the area.
Do you have this info graphs posted anywhere with the mid rpm cams? Most all my hard riding is in the 3500 to 7500 range, 7k and up screams😂. You mentioned testing with others, but were these test results with the stock sprockets?
Don't know too many people who would get excited about 2-3 hp increase... other than Tdub owners ha ha.... thats a big boost percentage wise. This coupled with an oil cooler and some mild tires might be the ticket for the highway and moto camping riders, or the bobber builders. Would be interesting to see how well this would perform on extended highway runs with properly tuned fueling/air/exhaust. Personally I rarely get over 45mph ha ha.
This may be an already answered question or be stupid, how feasible or practical would it be to just swap in a yahama 250 engine from across the lineup, instead of building up the 200?
Someone that has done it might chime in here. The biggest thing is that you're buying another bike or at least the power train. You will need an output shaft extension, swap the ignition cover. Not sure what else is required. I would say that it is very expensive for some and probably not very for others depending on parts availability.
@@MOBStreet83 Definitely agree with this, two different machines... I think the limits of the big ol tires might start showing the faster you push this thing on the highway, cornering and especially braking might get ... interesting.
![VICTOR Denmark Open 2024 | An Se Young (KOR) [1] vs. Gregoria Mariska Tunjung (INA) [5] | SF](http://i.ytimg.com/vi/Y3QEyCih85s/mqdefault.jpg)
Thank you for explaining that the modifcations move the power band higher up in the rev range. This is important if you are charging up sand dunes, or just looking to go faster, quicker, and that the stock engine is better suited to "tractoring around" offroad. Very helpful information in determining what you want your TW to do!
Dude, that is crazy good gains that you can get out of the bike. I like how you explain what will the outcome of the mods will be. Of course it will get worse mileage, but like you said, if you are looking at these mods, fuel shouldn't be a concern! Thanks for bringing out what all the TW folks have been asking for over the years!
great work. Tdub is an awesome bike, and this helps bridge the gap for modern outputs while still keeping much of the versatility.
Thank you for all you've done for the tw200. You are awesome, thanks for your time. Love to here about a tw round up in your neck of the woods
That's pretty impressive gains from a T-Dub !!!! Very nice......
Nice Video! Fork Springs are next, but will definitely put your motor mods on my list! THX!
Man that's AWESOME man..great job..love this info..very exciting
Nice explanation!! I’ll be coming to you when I need more power!
Thanks for leading the way to a more user hwy TW Bradley.
Dont know why your video showed up on my feed but I thought it cool your shop is in Batesville AR where my family is from...in fact my great grandfather was one of the original settlers in the area.
Very cool!
Do you have this info graphs posted anywhere with the mid rpm cams? Most all my hard riding is in the 3500 to 7500 range, 7k and up screams😂. You mentioned testing with others, but were these test results with the stock sprockets?
Yes, stock sprockets. I will work on publishing the Dyno runs for the mid range cam. It looks about the same with slightly less on the top.
Don't know too many people who would get excited about 2-3 hp increase... other than Tdub owners ha ha.... thats a big boost percentage wise. This coupled with an oil cooler and some mild tires might be the ticket for the highway and moto camping riders, or the bobber builders. Would be interesting to see how well this would perform on extended highway runs with properly tuned fueling/air/exhaust. Personally I rarely get over 45mph ha ha.
A TW200 with your carb, big bore kit, head and exhaust, whats the reliability like for long haul?
Although most would disagree, I think it is as reliable as a Yamaha 225/250 because that's what we are essentially converting it to.
@bradleyperformanceproducts thanks for the speedy reply!
Turbo kit ?,with nos ?
Do you offer an engine performance for XT 250. I just ordered a skid plate and foot pegs off you and I am expecting delivery today.
Unfortunately at the moment we do not. I'm not sure if we are going to go down that road or not.
@@bradleyperformanceproducts I understand buddy
Hey Bradley awesome awesome!! Any chance I can get a cam card for the high rpm cam?
@@michaelwillis6218 partially. We offer the lift numbers but not the duration numbers. Those are proprietary to the manufacturer.
Ok I read approx .1 over stock . Is that lobe or valve lift?
This may be an already answered question or be stupid, how feasible or practical would it be to just swap in a yahama 250 engine from across the lineup, instead of building up the 200?
Someone that has done it might chime in here. The biggest thing is that you're buying another bike or at least the power train. You will need an output shaft extension, swap the ignition cover. Not sure what else is required. I would say that it is very expensive for some and probably not very for others depending on parts availability.
@@bradleyperformanceproducts I think overall, it is just worth having both bikes once all costs of the swap are considered.
@@MOBStreet83 Definitely agree with this, two different machines... I think the limits of the big ol tires might start showing the faster you push this thing on the highway, cornering and especially braking might get ... interesting.
Probably just gonna swap in a cp2 engine.