As a new farmworker, thank you so much for this video! Straight to the point, easy to follow. Saved my pride from having to ask my boss to show me everything
I did the 50 hr about six months. Looks like you've put your RTV to good use. Appreciate you showing how much debris can accumulate on top of the skid plate after doing the brush mowing. We just purchased a brush mower this month.
I'm glad you found this useful! Yes, we've gotten a lot of use out of this RTV so far. It would be significantly more challenging to manage our land without it.
Under the floor mat of the drivers footwel is a steel plate secured by about six bolts. If you remove this, you will be able to blow / wash out the dirt that collects under this/ the front belly plate.
Thanks for this detailed info. My question (after watching you crawl underneath) is, where are the safe lifting points on the frame for a swing-arm car hoist?
You mentioned a brush cutter you used. Guessing its one you pull behind your Kubota. If you have any "gotcha" or what might be helpful, I would look forward to another video.
Yes, we use a tow behind DR PRO 44T Brush mower. It's been a great tool to help us keep the pastures maintained and will definitely be the subject of some future videos.
As a new farmworker, thank you so much for this video! Straight to the point, easy to follow. Saved my pride from having to ask my boss to show me everything
That's great to hear! Thank you for taking the time to comment.
I did the 50 hr about six months. Looks like you've put your RTV to good use.
Appreciate you showing how much debris can accumulate on top of the skid plate after doing the brush mowing. We just purchased a brush mower this month.
I'm glad you found this useful! Yes, we've gotten a lot of use out of this RTV so far. It would be significantly more challenging to manage our land without it.
Thank you for the video, much better than just the manuel. We have a X900, and sure the grease points are the same or near enough.
Glad you found it helpful! look for the playlist with other maintenance tasks, I'll be adding more videos over the next week or so.
Very helpful video - thanks! I'm going to do this to mine tomorrow.
An ounce of prevention... As my neighbor would say, "I like grease, it's a good thing" Glad you found this helpful.
excellent video. Just what I needed. Thanks
Glad you found it helpful.
Thank you very much better than the manual I have X 1100.I think Kubota should use your video.
I'm glad you found it helpful!
Under the floor mat of the drivers footwel is a steel plate secured by about six bolts. If you remove this, you will be able to blow / wash out the dirt that collects under this/ the front belly plate.
Good to know, thanks for the tip!
Thanks for this detailed info. My question (after watching you crawl underneath) is, where are the safe lifting points on the frame for a swing-arm car hoist?
Sorry not sure about that one. I wish I had a hoist so I'd have a reason to figure it out!
You mentioned a brush cutter you used. Guessing its one you pull behind your Kubota.
If you have any "gotcha" or what might be helpful, I would look forward to another video.
Yes, we use a tow behind DR PRO 44T Brush mower. It's been a great tool to help us keep the pastures maintained and will definitely be the subject of some future videos.