How To Update And Jailbreak Your PS4 On 9.00 (Fast Method) Using USB Drive

Steps:
1. Download Playstation 4 Firmware 9.00 "PS4UPDATE.PUP", "exfathax.img" and "rufus" files from the link here
PS4UPDATE.PUP - www.mediafire....
exfathax.img - www.mediafire....
rufus - www.mediafire....
Preparing Flash Drive to update to PS4 Firmware 9.00:
1. Plug in your USB Flash Drive and format it to "fat32" or "exfat"
2. On the root of your USB Flash Drive Create a folder called "PS4" and in the folder create a other folder called "UPDATE"
3. In the "UPDATE" folder place the 9.00 firmware file "PS4UPDATE.PUP", make sure that the file name is correct if not the ps4 will not be
able to read it
Preparing Flash Drive for the jailbreak:
1. Use the "rufus" program or Win32 disk imager to burn the image to the USB drive, after that make sure your PS4 is
on system software verison 9.00
2. After you are done writing the "exfathax.img" to your USB drive do not
open your USB drive just safely remove it by going to "My Computer" than
right click your drive and select "eject"
3. Turn on your PS4 and open the browser and go to one of theses two explit host
address "nightkinghost...." or "karo218.ir/"
4. Once the exploit host loads pick the "9.00 gold tab" and than pick the
"GoldHenV2b2 tab" than you will get a message on your screen telling you to insert your USB drive now so plug
plug your USB drive on one of the USB slots
5. Make sure you do not close the dialog or hit ok until a notification pops up saying "unsupported drive", now hit ok
6. You will get a other pop up telling you to remove the USB drive, after that you will get a prompt telling you
"The System have been jailbroken" and that's all your PS4 is now jailbroken
If you want to keep your system from updating you have to change your internet connection settings on your PS4
1. Open "Settings" than select "Network" and Open "Set Up Internet Connection"
2. Select "Use Wi-Fi" if you are using wifi but if your are using a enternet cable select "Use a Lan Cable"
3. Select "Custom" and if you are using a Wi-Fi Network it will show you a list of connections
4. Now you should be on the "IP Address Settings" and select "Automatic" and than choose "Do Not Specify"
5. Select "Manual" to directly edit your DNS IP Address, you will be asked to enter a primary and secondary IP address for the DNS Server
6. Enter this DNS address for your primary
62.210.38.117
7. Enter this DNS address for our secondary
0.0.0.0
8. Once you finished select "Next" on the bottom of the screen to move on to your "MTU Settings"
9. Now on the "MTU Settings" screen select "Automatic" and than on the next screen select "Do Not Use"
10. After that you internet settings will be saved and now your ps4 can't not connect to sony server therefore you can't not update the system
Remember that you will have to repeat steps 4 - 7 every time the ps4 is rebooted or unplugged. If you leave your system in rest mode you don't have to worry since the system never rebooted or
restarted the ps4 will still be jailbroken
Make sure you change the dns on your connection to these two dns addresses to prevent your ps4 from updating
62.210.38.117
0.0.0.0
Steps To Transfer FPKGS To Your USB:
1. Make sure your USB Drive is formatted to Fat32 or exfat and that it have enough memory to store the FPKG
2. Take your FPKG and put it in the root of your USB Drive and make sure you don't put it inside of a folder
3. If your FPKG is in a zip format you will need to extract it using a zip program such as 7-Zip or Win-Rar
4. After loading up the Jailbreak go into the Gold Hen tab and than select "Debug Settings"
5. Than select "Package Installer" and than you can choose which FPKG you want to install or you can install all of it at once, now you can enjoy your app or game
IF YOU GUYS NEED ANY HELP JUST COMMENT DOWN BELOW AND I WILL TRY TO HELP YOU
IF YOU GUYS LIKE THIS VIDEO PLEASE RATE, COMMENT AND SUBSCRIBE FOR OTHER GREAT VIDEO AND TUTORIALS.
Sony,Playstation,Playstation 4,PS4,Hack,Jailbreak,9.00,Gold-Hen,USB Drive,FPKG,Mod,Modding