How To Add Glitter To A Wine Glass - Mod Podge & Epoxy
HTML-код
- Опубликовано: 2 авг 2018
- In this tutorial we do the mod podge and epoxy seal version of the glitter wine glass.
Of the two ways we did this, we found we preferred the mod podge and epoxy method better than the full epoxy method.
Which way do you prefer?
Don't forget to LIKE and SUBSCRIBE!
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
I think this is one of my favorite tutorials to watch.
I just found this video and I must say, IT IS A PERFECT DIY!!! So much so, that I subscribed & Liked!! I love how direct you are, & get right to the point!! Thank You so much for sharing. You made the steps, Easy-Peasy!!!❤❤❤❤
Thank you so much! Always happy to help :)
@@ErinEnsley hi I try this at home but it's coming out it's because the glue or gulter
Very informative and pretty results. Thank you! And the sound was perfectly fine. Some ppl may just need to adjust the speakers on their devices.
Thank you for your help.... I can't wait to get started...... I may be asking you questions
Definitely appreciate this video. I feel crafty all of a sudden.
I need a glittered wine glass! I can totally make this. Wow!
Ty for such an easy tutorial to follow! ❤️❤️❤️
Subscribed because I saw your gronk shirt in the thumbnail and your Boston shirt in the video. Love supporting fellow mass DIYers 😇💞
Awesome! Thanks for the support! You know we love repping our boys when doing anything 😝
Brilliant! Great video
Gronk,love the shirt!
I have watched many videos on this type of diy and hands down yours is the most informative and easy to replicate. Thank you so much!
Thank you for the kind words!
Love this video. I didn’t use fine glitter & it has bumps. Can this be sanded down before the 2nd coat of Epoxy?
VERy nice. Thanks
Great video! TFS👍👍❤️ Luv your Gronk TShirt! Go Pats!😉
Thank you!
Love this video
This is so pretty! 😄
New Subscriber!! 😁
Thanks for joining!
Hi thank for the tutorial very helpful question how many layers of epoxy are you suppose to put on the wine glass?
Very nice. I'm new to resin and even newer to resin on glasses. I like this method of the glue and glitter first then the epoxy but my question is this: Do you still have to flip it even with a ultra thin layer of epoxy? Thanks and Blessings.
Yes, you will still need to flip it even if you do super thin layers. Epoxy likes to move and if you keep it in one spot it will clump up and dry like that and leave a dimple or bump. You may not have to rotate it as often, but make sure you keep an eye on it and rotate as needed.
Hi... it's a great idea thanks for sharing.... Can we do the same techniche on glass table top?....
Great idea! Wonder if it works
I am also glad I stumbled upon this video I do a lots of glitter glasses but would love to know how you get the Decals and pretty printed letters I just use the regular letters from WallmarkI enjoyed this video and will be subscribing thank you so much for sharing continue to be blessed
I use a machine called a Silhouette Cameo to cut vinyl and make my own decals.
I use my cricut air 2 to make my decals using premium vinyl!
How do you sit it to dry? I notice when I use epoxy it drips and gathers at the bottom.
Great video! Do you use a turner for these glasses?
The geeen painters tape is the best. Sharp ones every time
Thanks! I’ll test the green one.
Can you tell me what kind of epoxy clear coat you are using? I'm new to doing this, and am not sure what to purchase!
Nice Job! Seems super easy. What font did you use for your decal?
Great video thanks for sharing. I don't have a cricut machine so I was wondering is there anyway to add like stickers or photos? And if so how can we go about it?
You can add real life photos and flat sticks and then cover them with epoxy.
Question after you added your last coat of glitter. Did you seal it with mod podge then epoxy? Or did you just lay your last coat of glitter then lay epoxy right over that? Thanks I LOVE your video using epoxy with no spinner.
Great work, so does it mean that if you put apoxy can the glass be dish washed?
Great video!... How long did you wait to take the electrical tape off using the modge podge and the epoxy? Want to avoid the mishap you mentioned.
It really will depend on your dry time. You would want the epoxy to still be kind of wet but not moving.
I loved the music
How long do you leave the tape on after the first epoxy application? Awesome video!
It will depend on how much epoxy you use and the tempature of the room you are working in. Best way to tell you is when the epoxy is still wet/tacky but not moving anymore.
Hi thanks for the video . Did u use heat transfer vynil ? Or what kind is it good for glass?
If using epoxy you can only use regular vinyl like 631 or 651. Heat transfer would not work.
Awesome job young lady I just have a question where to get the epoxy from. I just recently designed 28 glasses and I only used mod podge and mod podge clear acrylic sealer spray and I had to wash the glasses by hand. They turned out pretty and the family was pleased with them
You can purchase epoxy at any craft store, Amazon or EBay. You will still need tro hand wash them. The dishwasher is too hot. Epoxy is the best to use if you are giving glasses to people to use to drink from. It’s the only thing that is FDA compliant.
Thank you for the information 👍🏾
@@ErinEnsley I was just going to ask, are these dishwasher safe. :) Thank you!
Love this video but can you please let me know how long between The second layer of ApoxseeIt’ll be my first time using Apoxsee
Is there a specific kind of epoxy to use? I need to seal mine but wasn't sure until I find you vid
I tried the Mod Podge method and it did really well. For my final coat I used Mod Podge and a little bit of glitter. Is there an alternate I could use for epoxy because I want it to be smooth. I’ve heard of people using triple thick
I’ve only ever used epoxy and it always comes out smooth. Epoxy is really the only thing that is “food grade” that’s why so many people use it.
Do u leave the tape on when u put the epoxy on ? Cause mine have two different colors tape on top and straight down .
I like your shirt!
Thank you!
Can you use a blade knife to go around between the tape and glitter before you take the tape off? Would that work?
I’ve noticed when I take my tape off I always like to pull towards myself instead of straight across that also helps not take the glitter off
I do the same on mine. It doesn’t seem to pull as bad
Hi! This looks Great! What brand epoxy did you use? Is it the ones you get in the tubes?
I buy in bulk so whatever is cheaper on EBay at the time. I try to buy Art Resin, that’s my favorite. Mine come in gallon jugs.
Hi there great job just want to know if I’m only applying modge podge and glitter to stem of wine glass can I just put second coat of modgepodge and it will be fine or should I add epoxy coat nothing on top of glass except decal
You have to seal the modpodge with epoxy. Only sealing it with modpodge will eventually have the glitter fall off. It also dulls the glitter. Adding the epoxy brings back its shine.
@@ErinEnsley I was looking for this answer throughout the comments.
Also you mixed epoxy with that ?
did you not buff the shine off glass???
Hello, which epoxy did you use?
is there a reason that you leave the top part without any glitter on it is that help make the epoxy seal better or is it just a personal preference because I made a glass that I already have glitter on with the mod podge but I went all the way up to the rim with it and I'm trying to figure out if I can still epoxy over that or not
Some people leave room at the top of the glass
So you can drink from the glass and not have to use epoxy
You don't have to put a lot of expoxy. Once you place the expoxy on you allow it to stand and dry. Every video with expoxy they're always spinning on something. Thank you for sharing.🥰🥰🥰🥰🥰 Taught me a new way.
What did you mix with the epxoy
How many times do you do the expoy and if you do a second coat do you do it when its takcy or hard
I normally do two coats. You want the epoxy to be completely dry before adding another coat.
I am new at the epoxy and I am having to epoxy once and then sand for the points left after I epoxy. Then epoxy a seond time. I have followed the instructions. Is there a way to make the epoxy smooth out the points. or smooth the glitter. I need help...
Ok I need help what I 50/50 ratio. I'm doing like a wine glass like yours without the bottom part.
How do you let the glass dry with the epoxy on it?
I am new to this I have been trying to do mason jars but I used modge podge and epoxy does it suppose to be sticky while drying it’s been drying for two day now and still is stick I don’t know if I did some wrong are not
That usually means you didn’t mix your epoxy correctly. It should only take 12-24 hours for it to set and harden. Be sure to read the directions and mix according to the epoxy you purchased. Most are equal parts of A and B. They have to be near exact parts and mixed for a full 3 mins to work. Some are a 2:1 ratio.
I just tried to glitter wine glass, with mod podge and sealer spray... when I took tape off the glitter (all of it) just came off... just like pulling the tape...East peasy... I will try your method now that I have cleaned the glass up, which I used mineral fusion and it cleaned up like stupid crazy easy. Question: when putting the epoxy on the base of the wine glass how are you keeping it from running off? I have a turner, should I put it on the turner until dry?
You have to remove the tape right after you apply the glitter, then use your sealer
I’m finding that once I put my glitter on (I use polycyclic) it looks fine. But when I do a second coat of polycyclic the glitter looses some of its shine. What am I doing wrong? It’s almost like the glitter is too wet?
Also will epoxy give me a smoother finish then polycyclic or triple thick?
Thanks in advance for you help I really need it.
Btw good idea with the tape I’m going to use that idea
I’ve never used polycyclic so I couldn’t say. Epoxy does give a smooth finish without the glitter loosing its shine.
Where do you get your glitter at? Do you use ultra fine or slightly chunky? Thank you, I am in the UK love your videos xx
I find the super fine is best! I purchase my glitter at hobby stores, Walmart and Amazon.
Thank you so much for your reply :-) we don't have a Walmart over here :-( & craft shops are very expensive where I live but al have a look on Amazon, keep up the good work, Thank you for all your help :-)
DISHWASHER SAFE 😊 OR HOW TO WASH THEM... HOW LONG WILL THE GLITTER STAY INTACT? BEAUTIFUL...THANK YOU
Not dishwasher safe, epoxy doesn’t like heat. Hand wash only. As long as you are good to the cup the glitter will last forever.
SO do you not have to use a turner for this? I always thought you had to turn the glass while it had epoxy on it.
Thanks for asking. This glass would not sit on my turner. Because I am not applying epoxy in the rim or the bottom/underneath of the stem then I’m able flip the cup to allow the epoxy to flow and dry.
Erin Ensley so flip so it is sitting on the stem? (Upright)?
Yes. Setting it upright, then as the epoxy flows to the bottom, flip it upside down. I keep doing this until it is dry.
Hello - thanks for the video! can you tell me how long after epoxy, do you remove the tape? is it only tacky or is it still pretty wet?
I find the best time, is while it is tacky.
How long do you let it dry for the 1st layer and 2nd layer?
Question, if you wanted to add rhinestones....can you pour epoxy over the rhinestones??????????
Hi! Thanks for this vid. I have a question. I made glitter wine glasses and i’m going to finish them with epoxy. Will be my first time using it. Kinda scary. But: do you just use epoxy right on the glitter and until the edge of glitter. Or do you go a bit beyond the glitter edge to sort of seal the glitter making it easier not to chip the glitter? I hope i explained it right.
Tape right up to the glitter and seal it all.
Thank you!
Which epoxy did you use
Do you think its better to use painters tape vs electric tape? I had the Same issue with removing electrical tape but found it was a little better removing when it was completely dry
I feel like it comes down to personal preference. For me, when I used the painters tape I had a lot of edges to fix and clean up. So I tried the electric tape and had almost no issues with it.
I use painters tape. It works better
@@takenyabenbow2935 same here!
Electrical tape is for a professional flawless line. Painters cannot compare. Takes too long to clean up the sloppy mod podge that seeps through. Electrical tape never leaves a mess
@@ErinEnsley Thank You!!! You answered all of our questions!! You rock! I'm glad I subbed to your channel!! Have an awesome weekend!
cool
Can we use spray adhesive to seal the glitter or does it recommend epoxy
dee martinez the only thing that is FDA compliant is epoxy. So if someone is drinking from it, it has to be epoxy.
I have a question they say epoxy is bad for your respiratory system what do you suggest I do and what type of epoxy do you use
I have a 3m reusable respirator mask and safety glasses. As for resin, I use a few but my go to is Art Resin
did you put the cup on a turner to dry the epoxy on this one?
No, I hand flipped this cup until it was dry.
Can you use the mod podge instead of the epoxy to seal the glitter. I bought the silver circle glitter also
Modpodge fills the shine of the glitter, the epoxy brings back the shine. Also, epoxy is the only thing FDA compliant so if you are using it for drink ware it is best to only use epoxy.
Where can u order personalized vinyl stencils from
You can make your own if you have a Cameo or a circuit. Or look on Facebook Market Place for someone local to you who does and sells them. Or Etsy - lots of sellers for vinyl on there.
How long does it take to dry?
I love your shirt
Thank you!!
Can you use the mod podge to seal it instead of epoxy? What is the difference?
You have to finish with epoxy. It is the only thing that is FDA compliant
For this video did u put the cup on a turner or just let stand dry?
No turner was used. I hand turned it every few minutes by flipping it up side down then back upside right until the epoxy was no longer moving.
Oh okay. Thanks
So Epoxy is for hold right ? Like a spray coat protective?
Yes, it’s an adhesive but it’s more food safe than a spray adhesive.
Do you sand in between layers of epoxy?
Personal preference - I do not.
This looks great. Just a quick question, I've seen numerous videos where people just did mod podge without finishing with epoxy. Does a person have to finish with epoxy or can they just do full mod podge? Thanks for your help.
You really should finish with epoxy. It gives the glitter its full shine back. Plus it’s a lot more food safe than modpodge is.
@@ErinEnsley can you use anything other then epoxy like clear spray paint
@sha Wright it would not be considered food safe. If you were only making say a vase, you could but because people are using this to injest something you’d want to be compliant with the FDA.
@@Shadeekwa973 Thanks. The project I had in mind would be for a vase, it wouldn't be for drinking or ingesting anything.
@@ErinEnsley So what I have in mind is a decorative vase, and nothing involving food and drink. Thanks for your input.
So glad I stumbled upon this video, I'm in the process of making glitter glasses myself and this helped a lot. I am however having trouble drying my epoxy without a big mess. I don't have a spinner (or know how to make one), any other suggestions besides the flipping upside down?
Also, what do you use for your vinyl lettering?
Hey Shayla - Your other option would be to fit in the wine glass - a lot of people are using small nerf like footballs that they found at the dollar store - you could get cut a hole in the center and place a PVC pipe (these are fairly cheap at Home Depot or Lowes) and place the PVC pipe in the football - this can be used to hold the glass as well unstead of using your hand. Then I'd either cut a hole in some wood to hold it, or you could get a tall vase or glass and fill with some river rock or stones, sand, whatever, to place the pvc pipe in it to hold it. You're main problem is you are going to still have to flip it. You could try a hand turner - I took a some what tall cardboard box, popped two wholes in either side, placed my PVC pipe through the holes and my tumblers (I don't put my glasses on it) on the other end and every 5 minutes I spin it around by hand. Let it sit for 5, spin again, so the epoxy continues to flow and not drip. After doing this for an hour I then spin every 10 minutes for an hour, then every 15 for an hour, every 30 for an hour and continue with every 30 until the epoxy no longer flows. Hope that helps!!
My vinyl is Oracal 651
Erin Ensley That helps A LOT, thank you so much!! 💜
Shayla Green. If you don't want to try making a turner got to etsy. I brought one from there and it came very quick. They're listed under cuptisserie.
Ebony Lambert awesome, thanks for the tip!!
can you transfer a picture onto a glass using Mod Podge?
What method do you think holds up better ? Mid podge then epoxy or epoxy epoxy ? Thx
Thanks for asking! I prefer the modpodge then epoxy because I have more control of the glitter. But both held up the same.
Whats is epoxy?
It is a 2 part combination that when mixed together slowly begins to harden. This material is the only thing that is FDA compliant so people like using it to seal in glitter onto cups.
Where did you purchase Epoxy? Never heard of using epoxy with mod podge. Great info!
I buy in large bulk so I usually buy it on Ebay - whatever is around $100 - However, you can buy it at craft stores too. If you go to my store front and click on CRAFTS you'll see some of my favorite brands.
www.amazon.com/shop/erinensley
Where to buy epoxy at ? I am making some and don't know what to get
TU for this video using both methods. I am about to do my first glass cup. I would like to use Mod Podge only. Can you share your thoughts on this? TIA❤
If the glass is going to be used for drinking you will need to seal it with epoxy as your finishing coat. Epoxy is the only thing that is FDA compliant. Modpodge is fine for applying the glitter but it can’t be your final coat if you plan on drinking from it.
@@ErinEnsley TU for the quick response. I was reading all the comments for the answer. TU again for taking your time to answer ❤
Can I use the gorilla epoxy
How long did you let your mod podge dry before applying the epoxy
Depends on how thick you laid it on. Could be 10 minutes, could be 30 minutes. Once mine is no longer white I move on to the next step.
I did your method and left the tape on and the glitter raised up. How do i fix this
Best to remove when it’s still tacky so if it lifts you can just push it back down and it will stick as it hardens. You have 1 of 2 options. Add another layer of epoxy to hold it down, or sand that area, retape modpodge, glitter then epoxy (not the whole cup just where it lifted)
Can you use something else besides epoxy? Like trible thick
The only thing that is food grade and FDA compliant is epoxy.
Do you have to use the epoxy sealant or is this optional
Jess Eden if you are using glitter and people plan to drink from the glass then you have to coat it with the epoxy. It is the only thing that is FDA compliant.
What brand of epoxy did you use?
I buy in bulk, so it’s whoever has the best deal that week. My go to brands are Art Resin and Amazing Clear Cast
What do you mix with the epoxy?
What do you mean? The two things that I mix make the epoxy.
Do you mind telling me what kind of epoxy you use?
I buy in bulk so I purchase whoever is cheapest on EBay for around $100. Amazing Clear Cast and Art Resin are some of my favorites but I have purchased other brands as well.
What size is your decal for your glasses
I always measure the cup I’m using, so it’s always different. But typically, around. 3x3.
What’s the difference and I just use mod podge And no epoxy?
And if I use epoxy it won’t run?
You have to use epoxy to finish it. If you don't, nothing will seal in the glitter. Epoxy, once cured, is the only thing that is FDA compliant. If you do just epoxy then you don't have as much control over the glitter like you do when you do the method of modpodge and epoxy.
I accidentally smeared epoxy on the clear part of my glass. I didn't see it until it dried. How can I remove that?
You’d have to sand it down if it’s thick. If not, you can try to take some acetone nail polish remover to eat at it.
Can you wash these or do you have to wash by hand?
Hand wash only. Dishwashers are too hot for epoxy.
I just want to know is that the clear to give it that shine
Yes, epoxy gives the glitter it’s shine and seals it in so there is no fall out.
One more question where do you get the decal letters from
Please and thank you
I make them using a Silhouette Cameo. They are cut out of high grade vinyl.
I use triple thick as well
Miss Erin?
I am interested in customizing 50 glasses for my annual Circle of Live Christmas dinner. I feel confident with the glue and glitter. But this stencils or vinyl transfer had me shaking? Could recruit you to sell me the decals?
It’s possible. Send me an email and we can discuss further. Lilerintron@yahoo.com
I know it’s been a few years since this video came out, but is it possible to make these glasses using just dishwasher safe mod podge?
I messed up and spent a lot of money on supplies and started with original mod podge and the finished product just peeled off my glass. I’m trying one more time using dishwasher safe formula, but I wanted to get a professionals opinion on the possibility of mod podge only before I spend a lot of money on epoxy 😂
If people are drinking out of the cups you will have to seal it with epoxy. Epoxy is the only thing that is FDA compliant.
What font did you use.
I believe this is Autumn in November - it can be found on Dafont
Can you add epoxy to the rim? i do tumblers and all of mine go to the rim with no issue, but they also have lids. so i was just curious.
Technically there isn’t anything that says you can’t, however epoxy is only FDA compliant not actually approved so I don’t like to bring it to the rim if that’s where people are going to drink from. If they are drinking from a lid then I feel it’s ok.
Where everybody gets the sticker for the glass?