Hi! I bought an Android stereo @ Aliexpress. I have a Cabasse Tronic (main unit on the boot and a CD changer on dash) and today tested the radio (just for experimentation, on the boot) and everything works except the steering wheel stalk. I've learned that I have to connect the "Key2" wire somewhere, but don't know where. Also, I've noticed that the car original mini-ISO connections has yellow and blue connectors, however, the Android wiring does not have any pins on the blue connector area. Can you please help me to know where to connect the "key2" wire? Also, there is a "ANT" wire that I have no idea what it is and a "Reverse" wich I think it is probably for reversing camera...
Hi SirDeKay, The numbers of the wires are in included in the following slides where it says (terminal #). Maybe terminal was not the right word..sorry for the confusion.
To take the Eonon radio out you need to use the flat key-like tools that comes with the radio. If instead, you mean the original Renault radio, you can use a couple small Allen keys. In any of both cases, insert the tool in the four slot/holes you can see next to the corners of the radio. You need to insert two tools and release one side at the time. don't push the tool too hard to avoid bending the clips.
Hey nice video! Do I have to follow the same steps to install an aftermarket 2dim radio? Ive got a Megane 2003 with "Tuner List" radio and a CD charger, which means I've got this "plastic bridge" between these two. I'm afraid that if I cut it the 2dim radio wont fit as well as the original radio (as needs these plastic separation to fit). i know the video is old but I have been all around the internet trying to get the right information before doing something wrong! Thank you!!
Hi, I don't understand your dilemma. As far as I understand DuobleDIN radios (like EONON i used) won't fit unless you cut the plastic bridge. Then, depending on which particular radio you are using... you might need to use a frame to fix the radio in position (I mean the galvanized metal sheet frames) and a plastic frame to fill the gap between the radio and the fascia.
Hi. What were the dimentions o the radio. Did it fit in the dash
Hi! I bought an Android stereo @ Aliexpress. I have a Cabasse Tronic (main unit on the boot and a CD changer on dash) and today tested the radio (just for experimentation, on the boot) and everything works except the steering wheel stalk. I've learned that I have to connect the "Key2" wire somewhere, but don't know where. Also, I've noticed that the car original mini-ISO connections has yellow and blue connectors, however, the Android wiring does not have any pins on the blue connector area. Can you please help me to know where to connect the "key2" wire? Also, there is a "ANT" wire that I have no idea what it is and a "Reverse" wich I think it is probably for reversing camera...
Is your car a megane 2002 to 2004? ANT should be the antenna
on the picture with the cable reference numbers, the arrows aren't really accurate. Could you please tell me the numbers of the wires?
Hi SirDeKay,
The numbers of the wires are in included in the following slides where it says (terminal #). Maybe terminal was not the right word..sorry for the confusion.
I have the same radio installed, but I can't get it out of the dashboard. Do you have any ideas how I get it out?
To take the Eonon radio out you need to use the flat key-like tools that comes with the radio. If instead, you mean the original Renault radio, you can use a couple small Allen keys.
In any of both cases, insert the tool in the four slot/holes you can see next to the corners of the radio. You need to insert two tools and release one side at the time. don't push the tool too hard to avoid bending the clips.
Hey nice video! Do I have to follow the same steps to install an aftermarket 2dim radio? Ive got a Megane 2003 with "Tuner List" radio and a CD charger, which means I've got this "plastic bridge" between these two. I'm afraid that if I cut it the 2dim radio wont fit as well as the original radio (as needs these plastic separation to fit).
i know the video is old but I have been all around the internet trying to get the right information before doing something wrong!
Thank you!!
Hi, I don't understand your dilemma. As far as I understand DuobleDIN radios (like EONON i used) won't fit unless you cut the plastic bridge. Then, depending on which particular radio you are using... you might need to use a frame to fix the radio in position (I mean the galvanized metal sheet frames) and a plastic frame to fill the gap between the radio and the fascia.
Facundo Varela ok thanks for the reply!
Adjusts the radio just so , or have a cage where you can snap it?
Because my radio came on today and there is no cage...
no cage needed. there are 4 metal clips on the edge of the radio that clip on the car's fascia
Ah ok, thank you !
So,how do you install (secure) the damm radio!!
It has four spring loaded clips (one on each corner). If you push it in it should lock in position.