I just got this. It transferred several short videos from VHS nicely. However, when I transferred an hour long video the sound wasn't synched with the video after the 7 minute point and the video became very jumpy at times. It took about 4 gb at the "best" video setting for this hour long segment. At one point in the long video it created a second video as I believed it reached its capacity for a single video. Nice piece of a equipment and software, but it seems to limited to videos of less than 10 minutes for my computer. Maybe a faster processor and more memory would allow it to work better.
I would suggest using either OBS or the Built in Windows Camera app (if you have upgraded from Windows 7 since this vid was published) to capture from this device instead of the provided software. On my device I noticed that stereo audio inputs get mixed down to mono when capturing from this device. Does yours have the same issue?
Thanks, had an thought that the software wasn't compatible with WIndows 10. Installed a WIndows 7 installation with the software and driver that came with the Easycap USB and it worked. For anyone else wondering, yes you can use regular RCA White / Red cables instead of an S Video yellow cable. The S video cable is thicker and thus is more isolated from noise, but assuming that your VHS is already in poor quality it shouldn't matter.
My Vcp Players is god conditions But the is not capturing clearly when prees the record buttion audio is captiring but is Still one frame what is the problem
I have converted several VHS to digital video files to uplod to RUclips and burned a couple DVDs. You can set the recording length, like lets say you want to record a VHS tape and start it an come back later. Also the split size is the limit on the file size: 4 GB is a standard DVD and 7GB is dual DVD
Is it safe to just pull a device like this out of a windows 10PC without using windows to “eject/safely remove”? If safe, is it more for hardware like this, or safe to remove the USB adapter I use for MicroSD, or does that risk file corruption? Thanks again and Cheers!
Wim Grundy Hello Wim! Has this worked for capturing retail/commercial VHS? Or does it just scramble? I have the Original (Real, before “Special Ed’s”) Star Wars Trilogy I’d love to rip to digital before the tapes degrade. Thank you and anyone else who may have the answer! Thank you, take care!
I've been using mine for VHS as well, it was working fine for a little while, but now it seems to be staying in flickering rainbow mode. Occasionally I can adjust the picture enough to get something animated to look somewhat normal, but live action just won't do it.
I just tried this software - the captured video from the camcorder is not showing in colour, only black and white with stripes across the screen and some flickering. Any fixes for this?
Sound like you set the software for PAL mode or vice versa. If you live in US it's NTSC, if in EU it's PAL. You have to have it set for the region in which the original video was recorded in.
I'm using the unbranded version which is virtually the same. I'm trying to record a VHS tape to digital format.... I'm getting sound and a blue screen. Do I need a video lead plugged into something to get picture. Iv followed the installation but have no picture still and don't see the option in the settings. Can someone help. Kind regards.
Please let me know how do I change the physical size of what I captured on the screen of the software. It's basically a big window with a smaller size of the image and the balance part is blank. Thank you
Does the capture software allow you to cut your video's afterwards? E.g. I have one tape with a lot of different material on it. I'd like to record it all at once, into 1 big file. And cut it into different chapters afterwards.
Antonio El Rocho According to the info/instruction sheet with my unbranded yet *identical* model, it tops out at 640x480, 30fps. Maybe it get pissy when trying to do any higher-specs? Just a thought. Cheers!
You don't need a CD-ROM. You cam mount the CD image with software like DAEMON Tools Lite. It's free software. There is a link to the Driver Software in the description box.
Nice.. not what im looking for.. im looking for a TV Software from the EASYCAP TV Device after its installed that it looks like a TV on your computer and you can go FULL SCREEN on the TV
Hi, I would like to know how to use the easy cap with a phone? know the difference between easier capture and easy cap and how and when to use the s audio in?
I am using Windows 8 on my laptop. It has installed succesfully the smi grabber device for driver as i checked. However, video is not showing up while audio is there. How to solve it?
Try unplugging the device from the USB and then put it back in. Also check all the connections and make shore they are plugged in. Maybe try reinstalling the driver. If that don't work, It may be faulty. It works on Windows 10 so it should work on Windows 8.
Saying that, I just done a test with my old Camcorder and that worked. When I tried my Commodore 64 I could not get a picture and when I was running this device on Windows 7, It used to work.
Maybe you can help me. I installed this software yesterday and it works fine. Only issue is that the camera screen shows a color film and when I play that film on the laptop with the easy cap the film is in black and white! I have tried other cables, reinstalled the software and it won’t work. Hope you can help me Oh, it’s an old Sony video 8 camera and a laptop with win7
Thanks for making this video. How'd you manage to get the software to recognise the device as an audio-video recorder? Using Windows 10, it only shows up as an audio device.
Windows 10 drivers for EasyCap DC60 download: github.com/adrienvaucard/Easycap-DC60-Drivers Instructions To make Easycap DC60 work on Windows 10 : 1 - Plug device 2 - In Device Manager, Right-Click on Unknown USB Device (Easycap device) 3 - "Update Drivers" 4 - Manually update Driver And browse to ThumbDTV_setup_driver_5.7.129.0/Manual driver/64-bit (or 32-bit, depending on your system) 5 - Wait for Install 6 - To See and record your Videos, execute VideoView.exe in Easycap Drivers 7 - Enjoy ! Or better yet Use Capture Flux to record the Video Stream: paul.glagla.free.fr/captureflux_en.htm
I got it today. My video works fine in the vcr and when I play it through the laptop . Its not really working and the sound and picture are all over the place
John Gage my usb got a green light after I plugged and nothing much and when I open device manager then I saw that smi grabber device software is not working well...what should I have to do
@@John_B_Gage I have the same problem my friend. Because my labtop haven't a line in input jack only a headphone mic Jack ( only mono sound) I need this for a stereo recording... I need only audio is possible?
Thank very much for this video! The others that came close were for HDMI, not composite. I haven’t tested mine out: it’s identical to yours, but has no branded name. Hoping they work exactly as the branded for recording some Standard Definition gaming consoles, and hopefully get my VHS set of the REAL Star Wars (before special editions) stored digitally. I noticed you have the same “5.25 Media Dashboard” as I have. I haven’t installed mine yet- wondering if you have a video on these or just pros & cons/ works well or junk? Thank you very much! You’re a gentleman and a scholar!
Will this work with a free streaming service such as OBS? Is this also a cheaper option of the elgato video capture with the same type of quality, or is the quality a little lower than more expensive video captures?
@@John_B_Gage ohk i wanna i also have window 10 installed it on my pc and make a video and do live stream using this i hope it would give better result
Ребята, выложите, если у кого есть, диск к Version 4.0A. Пробовал качать пару копий дисков: в одной версии поле для ввода кода с диска выглядит иначе (меньше символов нужно вводить), а в другом такое же, но пароль с диска не подходит. Сидиром оказался сломан: диск не прочитал, появилась трещина (вряд ли, если кому дать диск, то он заработает). Так долго решался купить или не купить данное устройство, и, вот, столкнулся с такой проблемой.
I downloaded some software not on the computer and got it closer in sync but now I am off by seconds instead of minutes. It always starts out fine and end up off
This is part 2. ruclips.net/video/PH_N0Sr01ow/видео.html
can you upload the software and the driver., i have same cd like you . but i dont have cdrom hardware e in my cpu. please thank you
@@zuhalm Did you manage to find the software? I'm receiving mine tomorrow but don't have a CD-ROM either.
archive.org/details/easycapusbdvr
@@John_B_Gage thank you. let me try
I just got this. It transferred several short videos from VHS nicely. However, when I transferred an hour long video the sound wasn't synched with the video after the 7 minute point and the video became very jumpy at times. It took about 4 gb at the "best" video setting for this hour long segment. At one point in the long video it created a second video as I believed it reached its capacity for a single video. Nice piece of a equipment and software, but it seems to limited to videos of less than 10 minutes for my computer. Maybe a faster processor and more memory would allow it to work better.
I would suggest using either OBS or the Built in Windows Camera app (if you have upgraded from Windows 7 since this vid was published) to capture from this device instead of the provided software. On my device I noticed that stereo audio inputs get mixed down to mono when capturing from this device. Does yours have the same issue?
It doesn't work for me, the squares are empty. I press system, search .... and nothing...
Can you upload the software that comes in the CD?
Did you find how to download the driver softwere? I need this too. My notebook dont have the cd-rom driver.
@@saulomelo7090 me too! Did you find it?
I heard the old Arkanoid music on your intro and immediately subscribed! :)
Thanks, had an thought that the software wasn't compatible with WIndows 10.
Installed a WIndows 7 installation with the software and driver that came with the Easycap USB and it worked.
For anyone else wondering, yes you can use regular RCA White / Red cables instead of an S Video yellow cable. The S video cable is thicker and thus is more isolated from noise, but assuming that your VHS is already in poor quality it shouldn't matter.
My Vcp Players is god conditions But the is not capturing clearly when prees the record buttion audio is captiring but is Still one frame what is the problem
Do you have to play the video in its entirety for it to be fully recorded or can it be done automatically?
I can't remember. I only used this software and device a couple of times and since I upgraded to Windows 10, it doesn't even work.
Yes of course you have to.
I have converted several VHS to digital video files to uplod to RUclips and burned a couple DVDs. You can set the recording length, like lets say you want to record a VHS tape and start it an come back later. Also the split size is the limit on the file size: 4 GB is a standard DVD and 7GB is dual DVD
sample VHS footage converted to digital video and uploaded to RUclips ruclips.net/video/qamYFAOI7cw/видео.html
Is it difficult to download and connect -play this EASYCAP in APPLE MAC? Am having difficulty.
I don't know because I have never owned a MAC. I would not waste your time with this device. It no longer works on my PC.
I have the program also only with me it is divided when I vidios abspile
Is it safe to just pull a device like this out of a windows 10PC without using windows to “eject/safely remove”? If safe, is it more for hardware like this, or safe to remove the USB adapter I use for MicroSD, or does that risk file corruption? Thanks again and Cheers!
I can't even get it to work with Windows 10. I just pull it out when I finished with in when I used it on Windows 7 and I hardly used it then.
Installation was easy but when I preview the video the video keeps shaking and doesn't display properly audio is alright though. Please help.
I've not had that problem, It could be faulty. Send it back and get a replacement.
V
Same problem with mine. More ebay fake shite. Wasted hours troubeshooting this.
Thanks for the video. Do you know of a link to the software as my disk is damaged and cant be read? Thanks.
archive.org/details/easycapusbdvr
John Gage Thanks John that’s great! Many Thanks. Jason
@@John_B_Gage Thanks! , my easy cap disk could not be read , because my dvd tray is bad
THANKS A MILLION! I am only using the capture on my old VHS players.
Wim Grundy Hello Wim! Has this worked for capturing retail/commercial VHS? Or does it just scramble? I have the Original (Real, before “Special Ed’s”) Star Wars Trilogy I’d love to rip to digital before the tapes degrade. Thank you and anyone else who may have the answer! Thank you, take care!
I've been using mine for VHS as well, it was working fine for a little while, but now it seems to be staying in flickering rainbow mode. Occasionally I can adjust the picture enough to get something animated to look somewhat normal, but live action just won't do it.
Thanks for the review, Mate!! I checked your's out just to make sure the software didn't have any virus or other software attached. Cheers!!
Have you had any luck with Windows 10? Im having issues installing mine.
I gave up with this piece of crap Years ago.
I just tried this software - the captured video from the camcorder is not showing in colour, only black and white with stripes across the screen and some flickering. Any fixes for this?
I can't even get it to work anymore because for some reason it won't work with Windows 10.
Sound like you set the software for PAL mode or vice versa. If you live in US it's NTSC, if in EU it's PAL. You have to have it set for the region in which the original video was recorded in.
I'm using the unbranded version which is virtually the same. I'm trying to record a VHS tape to digital format.... I'm getting sound and a blue screen. Do I need a video lead plugged into something to get picture. Iv followed the installation but have no picture still and don't see the option in the settings. Can someone help. Kind regards.
I can't even get mine to work since I installed Windows 10. It's a Useless device.
Please let me know how do I change the physical size of what I captured on the screen of the software.
It's basically a big window with a smaller size of the image and the balance part is blank.
Thank you
I don't know because I can not use this with Windows 10.
I don’t have a USB in my camera, What should i do?
You connect it up via the White, Red and Yellow cables.
Does the capture software allow you to cut your video's afterwards?
E.g. I have one tape with a lot of different material on it. I'd like to record it all at once, into 1 big file. And cut it into different chapters afterwards.
I don't think so. The software is pretty crap just like the capture device itself.
@@John_B_Gage Do you have another suggestion?
Does it work on Win10? Thanks!!
I can't get it to work with Windows 10. I would not bother buying it.
Yes you can do that. It seems to work fine with my Windows 10 Home edition. Windows 10 actually also has some video editing and trimming tools.
sample video from VHS uploaded to RUclips ruclips.net/video/qamYFAOI7cw/видео.html
These should be called "EasyCRAP". Constant flickering and the display on screen can't keep up with the actual video being played.
Antonio El Rocho According to the info/instruction sheet with my unbranded yet *identical* model, it tops out at 640x480, 30fps. Maybe it get pissy when trying to do any higher-specs? Just a thought. Cheers!
Exactly my problem with this counterfeit ebay crap.
hello sir i dont have a cd player . and i want to install the software i dont know where to find it
You don't need a CD-ROM. You cam mount the CD image with software like DAEMON Tools Lite. It's free software. There is a link to the Driver Software in the description box.
Audio does not sync with video . It plays with 1-2 sec delays. I any tips to fix this problem
Mine does not even work anymore since I installed Windows 10.
Nice.. not what im looking for.. im looking for a TV Software from the EASYCAP TV Device after its installed that it looks like a TV on your computer and you can go FULL SCREEN on the TV
Can I use it to record a movie running on my LED TV, and save the movie on my laptop local hard drive?
My device doesn’t show my movie coming in. I noticed the green light doesn’t light up. Does this mean it is broken
I recon so. I can't get mine to work on Windows 10. This device is useless.
make sure the device is plugged directly into a USB port and not a hub or extension
Hi, I would like to know how to use the easy cap with a phone? know the difference between easier capture and easy cap and how and when to use the s audio in?
The device only works with RCA audio (red and/or white) with RCA (yellow) video or S-Video
I am using Windows 8 on my laptop. It has installed succesfully the smi grabber device for driver as i checked. However, video is not showing up while audio is there. How to solve it?
Try unplugging the device from the USB and then put it back in. Also check all the connections and make shore they are plugged in. Maybe try reinstalling the driver. If that don't work, It may be faulty. It works on Windows 10 so it should work on Windows 8.
Saying that, I just done a test with my old Camcorder and that worked. When I tried my Commodore 64 I could not get a picture and when I was running this device on Windows 7, It used to work.
John does it works on windows 7 and also can we connect to ps4 or xbox ? because i'm planning to buy it.
I used to run this on Windows 7 and it works but this is not HD so I don't think you could connect a PS4 or Xbox up to it.
My laptop doesn't have a disc drive is there any other way to install the software
Maybe try downloading the software but my capture device don't even work anymore.
How do I convert VHS cassettes using this? I connect this to ny VCR but it won't display the content, goes straight to my laptop camera.
I want full screen
How much memory does the videos take up? I was thinking about getting this but I heard that 30 minutes of video takes 13gb.
If you got Windows 10, I would not bother. Mine won't work on it.
You need the drivers for Windows 10 but the video is really bad quality so I wouldn’t advise getting one
Mellow Dude you can compress it after
Sir, when I convert the video, the converted video shows a watermark of the company, how do I get rid of this problem
Buy a new capture card because I can't get it to work with Windows 10.
Did you solved the problems with Windows 10? I´m not able to make it works on W10
I can't get it to work. It's rubbish.
See Michael Pimentel's comment
Hello, my CD is scratched... is there another way to get the software?
archive.org/details/easycapusbdvr
@@John_B_Gage thank you!¸
I downloaded the software from the descriptionbox but now it's asking for the serial number??
Mine don't work since I've been using Windows 10.
@@John_B_Gage Oh I have windows 10 too. Do you think it will work on windows Vista?
All I do know that it worked with Windows 7. I've never tested it out on any other OS besides Windows 10.
@@John_B_Gage alright thank you, do you know how to connect the s-video plug? Do I need a s-video cable for that?
@@sisi3855 Yes, You need an S-Video cable. I've never tested the S-Video part of the device.
Maybe you can help me. I installed this software yesterday and it works fine. Only issue is that the camera screen shows a color film and when I play that film on the laptop with the easy cap the film is in black and white!
I have tried other cables, reinstalled the software and it won’t work.
Hope you can help me
Oh, it’s an old Sony video 8 camera and a laptop with win7
I only ever used this a couple of times when I had Windows 7. Now that I have Windows 10, It does not work. This device is a piece of rubbish.
have you tried a different video input device. it could be your video output ports
i can get sound to work but no picture
same, did you find any solution?
Thanks for making this video. How'd you manage to get the software to recognise the device as an audio-video recorder? Using Windows 10, it only shows up as an audio device.
I can't even get it to work in Windows 10.
I tried one from an Australian shop. I had even more problems. Even the updated driver, from the seller's web site, actually contained a virus!
This device is a piece of rubbish.
Windows 10 drivers for EasyCap DC60 download:
github.com/adrienvaucard/Easycap-DC60-Drivers
Instructions To make Easycap DC60 work on Windows 10 :
1 - Plug device
2 - In Device Manager, Right-Click on Unknown USB Device (Easycap device)
3 - "Update Drivers"
4 - Manually update Driver And browse to ThumbDTV_setup_driver_5.7.129.0/Manual driver/64-bit (or 32-bit, depending on your system)
5 - Wait for Install
6 - To See and record your Videos, execute VideoView.exe in Easycap Drivers
7 - Enjoy !
Or better yet Use Capture Flux to record the Video Stream:
paul.glagla.free.fr/captureflux_en.htm
Hi...Can we use this to convert audio from a cassette player to Mp3?
You probably could but then again, you could just do that with a normal audio cable and better recording software.
I got it today. My video works fine in the vcr and when I play it through the laptop . Its not really working and the sound and picture are all over the place
how you know how to sort it?
Mine doesn't work any more. Never worked when I upgraded to Windows 10.
@@John_B_Gage What can I get instead?
Have a look on Amazon. I never replaced mine because I have no use for it.
So when you plug it in does a notification pop up on the omputer?
It should do when you plug a USB device in. I can't run mine in Windows 10 for some reason and I can't use mine anymore.
@@John_B_Gage There is driver online for Win 10
Where did you buy this? can you attach a link?
www.amazon.co.uk/gp/product/B014PI0KQQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
i have win 10 e 11 but i dont viewe video in application
I don't need video 'We can just capture audio stereo?
you can capture audio stereo using the red and white, and it will save as a video with blue screen or whatever video input you select
Does this work with a VHS video camera?
I can image it would do as longs that it has the right cables to connect it to the device.
@@John_B_Gage How do I connect it to the device if my camera only has one av out and one for s video?
@@sisi3855 You may have to look for an adapter.
It can work on car front camera to connect android screen
I don't think it can.
John Gage there’s another DVR can connect on front car camera
This thing is crap. Don't use this in your car. It wasn't made for that. It was made for older computers and consoles. VHS and all the older stuff.
John Gage android screen same like computer
Does it can choose audio recording mode? ex. 16bit LPCM ?
I honestly don't know because I can no longer use this. I can't get it to work properly on Windows 10.
I had one of these and it broke after a few months
WOULD IT BE POSSIBLE TO HOOK AN OTG CABLE UP TO THE EZCAP AND THE OTHER END OF THE OTG CABLE TO YOUR ANDROID PHONE, AND IT SAVE THE RECORDING?
I have not tried that and probably would not work. But you never know.
anything producing audio/video output with compatible leads will work
I have a channel on youtube and i want to screen record my xbox 360 does it work?
I don't own any Xbox, but I would not recommend buying this piece of crap. Mine would not even work with Windows 10.
can you do a live stream with this? like use as a webcam or on youtube/wirecast, ustream/livestream????
+version2media With the software that it comes with I don't think you can.
+John Gage okay i see. we're you able to confirm if you can film in 16:9 widescreen or it's only 4:3 as it shows in your video?
So far, only 4:3.
John Gage dang..okay i see.. thank you
Ah cool. I might get it but I guess I'm going to have to dig out my old computer to use it. I'm using it to capture N64.
We can digitalis with this a cassette audio ( stereo sound )?
I guessing you can record the audio. I've never tried. Since I've been using Windows 10, the device no longer worked.
@@John_B_Gage so it doesn't work on windows 10?
Mine don't. It's a cheap piece of crap.
I just got one of these today. But my cd has completely different software on it, which is trash. :\ What did yours come with?
Honestech VHS to DVD 3.0 SE
Thanks, i will have a look for it.
Wish it worked with windows movie maker :(
I am not getting any Smi grabber device on video device in my pc after installing please solve
What happens when you plug it into the USB. Does it say anything?
John Gage my usb got a green light after I plugged and nothing much and when I open device manager then I saw that smi grabber device software is not working well...what should I have to do
What do you have plugged into the device to capture?
You need the drivers just search it up
Could i plug this into a cassette player?
I am guessing so but you can connect a cable straight into your line in on your sound card from your cassette player.
@@John_B_Gage I have the same problem my friend. Because my labtop haven't a line in input jack only a headphone mic Jack ( only mono sound)
I need this for a stereo recording...
I need only audio is possible?
Sir ,is there any possible ways or software which help me to use it in full screen.kindly help me
I don't think there is. The software that came with mine was very basic. I can't get it to work with Windows 10.
freddy y a
Will this work on a desktop computer
Yes. Maybe not with Windows 10 because I can't get this to work no more.
@@John_B_Gage Yes, that is true. I tried running it on Windows 10 and it did not work. Then I tried on my old PC with Windows 7 and it worked.
@@John_B_Gage have you tried to change the compatibility mode?
@@Father_of_Death Good point.
Will this work to connect to gaming chair?
Never tried. lol
have you tried using it with Skype? mine just saying can't start video……blah blah blah...but i can use it with other software.
Never.
It can not be used for a webcam. It is merely an audio/video input device to record onto your computer, using the accompanying software.
There is driver online for Win 10
Where is the driver?
@@Dazzler69 type easycap dc60 driver
Still can't get it to work, ebay guy sending another. He says it's supposed to work with win 10.
@@Dazzler69 www.solvusoft.com/en/update/drivers/usb-display-adapter/easycap/easycap-dc60/sub-models/ try this. if its not working,try hammer
Can u use OBS studio in live stream to RUclips?????
Never tried because It no longer works. It's a piece of crap.
Thanks
@@John_B_Gage where are you???
England
Thank very much for this video! The others that came close were for HDMI, not composite. I haven’t tested mine out: it’s identical to yours, but has no branded name. Hoping they work exactly as the branded for recording some Standard Definition gaming consoles, and hopefully get my VHS set of the REAL Star Wars (before special editions) stored digitally.
I noticed you have the same “5.25 Media Dashboard” as I have. I haven’t installed mine yet- wondering if you have a video on these or just pros & cons/ works well or junk?
Thank you very much! You’re a gentleman and a scholar!
Love the reflection of your 10,000 lumen light in my face
can you show me how to screen to full screen
I can no longer get this to work. I don't you could do full screen because the software was very limited.
does it work on windows 10 please help me i want this NOW
I would not buy it because I am having problems with it on Windows 10
i got it to work fine
Maybe mine has gone wrong.
what chip do u have?
Intel i7 using Windows 10. I first used it on a AMD FX 8370 using Windows 7.
Will this work with a free streaming service such as OBS? Is this also a cheaper option of the elgato video capture with the same type of quality, or is the quality a little lower than more expensive video captures?
I have never tried streaming with it but if you can stream with capture devices, this one should work too.
The quality is only 480p
Video not Capturing clearly video stock
It can full screen?
can you give me software link
cn i use this for live streaming ????
Never tried. This device is useless. I can't get it to work on Windows 10.
@@John_B_Gage ohk i wanna i also have window 10 installed it on my pc and make a video and do live stream using this i hope it would give better result
@@tusharsharma5466 it is not intended for live streaming.
does it work with OBS?
I am guessing so. I have never tried.
Yup , it works.
Aspect ratio, old tube TVs and VHS or Beta 4:3 New Widescreen TVs 16:9
Can i live stream using this?
No idea because I can't get it to work since i've been using Windows 10.
i have a question. I am trying to use my mac as a screen to play ps2. Can someone tell me if this is what it does?
Yes it does it captures video and puts it on your pc screen.
Can you please give me driver form CD. I lost my CD.
easycapexpertti.mybisi.com/pages/drivers
Video Lag Lag ke Capture Ho raha he Ky Problem with he
Too old, the links are dead, no software for this obsolete hardware
@Shasta Cutler Well I found a old CD with the EasyCap software, Ebay still has sellers, so maybe visiting each one might provide a link.
Bang Kok Serisl Numbernga gak bisa?
Ребята, выложите, если у кого есть, диск к Version 4.0A.
Пробовал качать пару копий дисков: в одной версии поле для ввода кода с диска выглядит иначе (меньше символов нужно вводить), а в другом такое же, но пароль с диска не подходит. Сидиром оказался сломан: диск не прочитал, появилась трещина (вряд ли, если кому дать диск, то он заработает). Так долго решался купить или не купить данное устройство, и, вот, столкнулся с такой проблемой.
DC60-008
how do I use it on a xbox360
I don't think you can unless you can get a converter.
Foxey 06 Use the old av cables they throw in with every 360.
Can i record a wii?
Probably. I have never tried a Wii
You can record anything with RCA output
I ended up getting it and yes it worked.
@@FrijolesyQueso that's great!
were is the camcorder connected to
Into the mains.
Where do I download the drivers?
It should come with the disk that was included
Works in windows 8.1 ?
I have never tried it on 8 or 8,1 because I never liked that version of Windows.
Working in all windows versions ?
I ran it on Windows 7 and it worked.
Excellent, I wanted to know if it ran on Windows 7
"John Gage
I ran it on Windows 7 and it worked"
Laptop to ps3?
This won't be any good with PS3 or consoles about the same age or modern. This is more for older computer and consoles.
so like. I thought that the recording would be stored in the USB on the end... then you plug it in when you're done recording.... am I wrong? 😂
It is just a capture device. You can save it to the computer if you record.
Okay, thank you.
very good, nice sharing. Thank you
It is workers in windows 10????
Mine don't.
with the correct software, it does. I have version 4.0 which is compatible with Win 10. see Michael Pimentel's comment
Does it screen record?
I think it should do but this does not work on Windows 10. Well, mine don't.
@@John_B_Gage ok thanks for replying dude.
It can only record input from the RCA/s video leads, or a built in webcam
I bought this of ebay. Dont't work at all.. I get the screen to record but the picture is green with lines all over it.. Worthless..
It doesn't work because you got a counterfeit one
My audio is out of sync
Mine don't even work.
I downloaded some software not on the computer and got it closer in sync but now I am off by seconds instead of minutes. It always starts out fine and end up off
did not work with windows 10
Mine don't work with Windows 10.
@@John_B_Gage i did try an old laptop running 7 and it worked perfectly lol
not working windows10
I can't get it to work on Windows 10.
Thanks for this Video.
This gadget sucks balls. I only recorded audio but not video from my VHS tape.
what did it record for video from VHS then? did you have a video connection? did you set it to record video with the device?
is their a support ..web page ?
I can't find one.