Finally, I figured it out! I modified the Diamond Button SW Control for my FYT 12.3 Android unit
HTML-код
- Опубликовано: 6 сен 2024
- The 12.3" Android unit does not allow to customize steering wheel controls, as it is an FYT 7862 unit using CanBus. All steering wheel controls are hence hard coded.
But there is a way to intercept this signal using 3rd party developed middleware and make it do something else in the unit. In this video, I detailed the instructions on how to do this using the FytHWOneKey.apk app.
Relevant Links:
FytHWOneKey App:
Latest as of 07/2024: github.com/noe...
Main Development link: github.com/noe...
Remote ADB App:
Latest as of 07/2024: github.com/cgu...
Main Development Link: github.com/cgu...
If you have a timeout try running this command with a Terminal application (you can download a terminal app from the Google store) "setprop service.adb.tcp.port 5555" it will enable ADB listening on port 5555 then restart
f the issue persist, open your config.txt and add the following line "service.adb.tcp.port=5555", then copy the config.txt and LSEC files into a FAT32 formatted usb drive and connect it to the USB data port. Let it install and then reboot. This should take care of the issue. If you can't find your config.txt files, you can use the one in the following link (which is generic): drive.google.c...
As an alternative, install the FET tool app in following link, open config.txt and add the following line “service.adb.tcp.port=5555”, then save and reboot: github.com/hvd...
KeyEvent List: gist.github.co...
Steering Wheel Control Project: xdaforums.com/...
This application uses a modded combination of the com_syu_ms.apk and a Config.apk. This combi allows you to change the "hard-coded" steering wheel buttons in case you have/use a CANbus. However, it doesn’t work in our units. We need an expert android developer to take on this and make it work for our units…
When you post, I like🤣
Thanks man!
sir , I am so appreciate your help , I made it , it really works . skip function is so meaningful to me , I have been waiting this function for several years since I used different brand android head unit in my Porsche . thanks again .
@@kenwei58 Great, good to know. How did you solve your ADB connection issue? Did you have to follow the additional instructions I posted in the description?
@@porscheDIY Yes , I follow your additional instruction copy the config.txt and LSEC files into usb devise , connect to my android usb port then it start updating new config.txt file with “service.adb.tcp.port=5555” . eventually I could use remote adb to modify parameter you describe in video step by step . very appreciate your help !
Wow. This is really good stuff!
Thanks! Appreciate the comments.
Very nice and very informative.
Thanks for your support!
Santirx thank you again for sharing valuable Porsche videos like this. The Macan owner community truly *appreciates* your willingness to post information and take time to respond to our questions on Rennlist and other Macan forums.
Thanks for your kind words and for your support!
This is why I love European cars, where you can change parameters on the fly. Great video, Sir. Hope you had a joyous 3 day holiday weekend.
Thanks!
Excellent work finding this solution!
Thanks for your support!
sir,Ifollow your instructions step by step ,but in process of connect ADB with port 5555 ,address 127.0.0.1 , shows error message , econnerfused ,should I try another ADB tools and try again ,my android radio is 13 version , thanks very much.
This is in the video description (copied here for your convenience).. Try this to see if it works.
If you have a timeout try running this command with a Terminal application (you can download a terminal app from the Google store) "setprop service.adb.tcp.port 5555" it will enable ADB listening on port 5555 then restart
If the issue persist, open your config.txt and add the following line "service.adb.tcp.port=5555", then copy the config.txt and LSEC files into a FAT32 formatted usb drive and connect it to the USB data port. Let it install and then reboot. This should take care of the issue. If you can't find your config.txt files, you can use the one in the following link (which is generic): ruclips.net/user/redirect?event=video_description&redir_token=QUFFLUhqbmNpWGUyb2dIU3F6aGU1U2dpQ0Nock1zNEo5QXxBQ3Jtc0trMnRCeC1YWS0wYXhnWVNCZXQ3UlBRbml0NnpwbjZyQWhTYmczTlROUUtZVE9IU0lkZGpjazZJTFJMWEZtbjhVbFY4TFpYcjBvWVBBTzljcE54ZWdsbS03SnZSUWw1R0FJeUg0UW93eG5rbGpKRl9GYw&q=https%3A%2F%2Fdrive.google.com%2Fdrive%2Ffolders%2F1Pt0SDB-sATC3o4NAC6ZY7ptId-paychO&v=Nk9kdunzBcI
As an alternative, install the FET tool app in following link, open config.txt and add the following line “service.adb.tcp.port=5555”, then save and reboot: github.com/hvdwolf/FET
Great videos. I have a situation with my 17 macan gts that I haven’t been able to resolve since I bought it a year ago. The ac blows a weird smell only for the first few seconds after the vehicle is turned on. This has me puzzled. I’ve used evap foam cleaner and spayed disinfectant with no luck. No coolant leak detected. The ac blows cold air. However, a few days ago I was about to do an oil change myself (thanks to you). The vehicle had been parked overnight and I proceeded to put it on ramps. I immediately noticed water dripping below the tc area. Keep in mind the vehicle was cold after being parked overnight. It made me wonder if the hvac system has a valley where water accumulates and this may be causing the foul smell. Or maybe water was just sitting on the belly pan. Do you happen to know the exact location for the hvac drains? Are these visible from under the vehicle? Thanks in advance for your help and for making great videos.
@@1000raulm This is a good observation. You may be correct in which there may be a dead leg or spot inside the evaporator which not allow full drainage. This is a common issue in high mileage Macans. It happened with mine. I basically inundated the evaporator with Klima cleaner to be able to get rid of the odor. The drain tubing I believe comes out towards the side of the transmission/transfer case…. Passenger side. That general area. But maybe if you take the cabin filter out, you could explore the drain area with a borescope. I’ll do that next time I’ll replace the cabin filter.
Thanks for replying. I’ve read of many people experiencing the same issue with their hvac but no one has been able to figure out what’s causing the problem. I’m almost certain the water I saw dripping came out of the hvac. I’m sure water drips on the tc belly pan, but it should evaporate overnight specifically since it drips on the heat shield. Resolving this mystery will help many macan owners out there. BTW: can the evaporator foam cleaner be sprayed also through the upper vents? Thanks again.
@@1000raulm I opened the filter housing and removed the cabin filter. Then attached the sprayer straw/tubing to the tip of my borescope so that I could see what I was doing inside. I put a towel on the floor mat to collect spills. Introduced the borescope with the straw(tubing) until I was able to see the heat exchanger and then started spraying like crazy. I emptied 2 cans. Then I let it drain for a few minutes, and then turned AC on high for about 15 minutes. Then reinstalled cabin filter and close the lid.
I was able to see foamy water draining through the drain at the bottom of the car.
This is what I used: a.co/d/eBnSOzf
I would not recommend introducing the foam via the vents. No guarantee that you will clean the actual heat exchanger.
The way I did it was very effective and the odor hasn’t returned yet after over a year.
You could also introduce a bit of antibacterial Lysol into the AC intake which is located on the cowl. That doesn’t help as much… in my case odor would return in a matter of weeks using this method.
@@porscheDIY excellent thanks.
Does this work with your previous unit? I am using the one u installed before this
@@marcuschow1335 The software was designed for FYT units (which is the one I have now), not for Topway units (which is the one I had previously). You could try, no harm in trying to see if it works. If it doesnt work, just delete the app. Let us know if you end up trying. My guess is that it won’t work.
Hello, santirx DIY!
1. Have you tried root installation?
2. What processor do you have in this unit?
I just ordered a similar one without the red dot with USI7862S processor)
@@winstarshl my unit is FYT with a 7862 processor. I have not tried root installation. My knowledge of Android operating system is very limited…. If you know how to navigate through Android, you can be of significant help to those of us with the unit. Especially is you can take on the projects that are no longer working for our units….
@porscheDIY
I have another device with UIS7862 - Тeyes 2K
Where I already did root.
And reassigned all possible keys, etc.
Your video is very useful
I have an idea to try another option - try to reassign keys
@@winstarshl let us know what you find out please!!!
@@porscheDIY
for root on my current teyes i install this zip via usb flash in fat32
I'll try it on ours, too
Universal_ROOT_7862_9863_8141_9853 zip file
but now that I have 10 android on my old one and 12 on this one, I'm still figuring it out.
Sir , just miss delete my message , I moved topic to rennlist, yes , I have diamond button, it works as circle. Also I modify steering wheel to new 2024 type .
As stated, if diamond button works to change sources in your Android unit as a carrousel, then this will work.
@@porscheDIY very appreciate your support ,thank you .