NEW STYLE Jeep Wrangler LED Headlights -- Install, Testing, and Review
HTML-код
- Опубликовано: 7 авг 2024
- Testing out the new Audexen 7in LED Headlights on my Jeep JK. These headlights have a sweet JL style design, but how well will they actually perform?
-- Headlight: amzn.to/39IL2Xc
*All Amazon links are affiliate links
--------------------------------------------------------
Some facts about these headlights:
- Fit wrangler JK, LJ, CJ, TJ (1997-2018) and Hummer H1 H2
(Also some motorcycles, such as Harley Glide series and Softail series)
- H4 harness with H4 to H13 adapter
- Optional DRL Halo ring
- Built in anti-flicker
- CREE LED chips
- 2 Rear Breather ports
- 24 Month Warranty
Let me know if you have any questions! :)
MUSIC:
--------------------------------------------------------------------------------
Track: I Am OK - Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: • I Am OK - Vishmak | Fr...
Free Download / Stream: alplus.io/i-am-ok
------------------------------------------------------------------------------- 
Авто/Мото
Great job on this video!!! Really love the tape trick for the aligning the lights! A lot of people forget to mark the original lights before removing them!!!
Would like to see which fuse you would run the daytime running lights wire into.
Thanks for this! just what I needed. the instructions from the seller are so simple that they are complicated!
Glad I could help!😀
Found it =) thanks. You are so right about the stock headlights. Been looking for new ones for a while.
Glad you found it. Good luck!
Nice wiring breakdown. Thanks. Putting these in my humvee build and couldn't figure out what the red wire did. Rest all checks per the bench test! thanks
I like those LED, headlights, great job doing your video, tks
Ty for this vid. Bought and installed successfully !!
One of the best upgrades I have done in a while. De stock lights are so bad, wow. I see the road now =D
Since I live in Belgium I have an European JK (2012 rubicon) and the DRL wiring was even easier. The stock light had a mini light bulb plugged in the man light dome as DRL. Connected to red one with the positive end and everything works as stock. Realy happy with the result
Thumbs up!
Saw this video on Tuesday, ordered, and got them today. Lights look and work fantastic. Was able to fuse tap into a fuse for the DRLs as well. Thanks for the video and review!
Awesome!!!
My lights just arrived and I want to fuse tap the DRL’s in the fuse box. Which fuse position did you place the tap. Photos or specific location is greatly appreciated so I don’t short anything out, thx!
@@bsmith9781 I used Fuse M8, on 2018 JK.
Gonna be my next set of headlights for sure!
heck yeah!
Great job on the video dude. Really well done. Just subscribed. Look forward to the others.
Thanks so much!!
Great job you did there, I really liked your video! Subscribed, hope to see more!
Thank you. I really appreciate it!!!
looks great. your high beam demo really helped me make the decision. so many cheap headlights have great low beams but almost no high beams. Thanks a lot.
I’ve had these for a year and still going strong the high beam are nuts
@@RTM459 thanks I have to get something better for my jk brute. Would these work in a 97 wrangler? Want to get some for my older brute as well.
@@philipschutter1626 long as they are 7 inches they should work I have a jlu and used adapters
I love how your Jeep looks!!! Mine is almost built the same way.
Thats awesome! Im really happy with the way its turning out😃
Dang those look hella good. Definitely makes the
Jeep stand out for sure
Thanks! I 100% agree!
Great video pal!! I have the same lights in my tj wrangler 2004 and those lights gives my Jeep a nice touch
Thanks! Im sure they look great on your rig!
Looks good! Thanks for sharing and good job and explaining!
Thanks!!!!!!!
Will consider these for sure. Not a fan of halos but might wire them to the turn signal. Just to be different
Great Job. Headed over to buy them now. Ty
This review was so good I stopped looking at the other LEDS that's was about to buy and order these instead. They be in today 😎 Thanks
Glad you found it helpful!
@@TacticalJK unfortunately my 89 raider wouldn't power them up🤷🏾♂️
Same here , watched the video and put an order . Thanks .
Awesome video dude, had a lot of problems with different headlights on my Jk and I saw these lights and the price, and was kind of suspicious about them cause also saw some bad amazon reviews but they definitely look like solid lights for the price. Awesome video!
Thanks!
Great review!
This video was well done!
Thank you!!
Thank you for your video
I push the buy it now for theses light's 😁
Awesome!!
Just got a new to me JK Willys edition and definitely need to upgrade those headlights and that would be great if I won a set of these. Enjoyed the review!!
Thanks! And good luck!
Great job on the video
Thanks!
Great video. Very good job. Informative.
Thank you!
Definitely a life saving video! Thanks for making it! Installing those same ones right now ✌🏻
Thanks! Hope they turn out great!
I bought these lights and installed them today. Thanks for the video and install tips.
how are headlights working now?
Still work great. Nice and bright.
@@mattbayer3986 thanks! Any trouble with install? I’ve seen a few comments that they have trouble installing. Thanks
@@dougcoleburn1579 I did not have any trouble. No trimming or anything like that. There is a lot of wire behind the light that had to be tucked away but that was easy.
@@mattbayer3986 many thanks
Great video...thanks !
Could you describe the daytime option in more detail?
Yoooo I need these in my life 💪🏼
Right!!! Good luck!
Hey I really need these lights. Thanks!!
Me too!
Me too!!
Good Job on the video
Thanks!!!
Those are awesome, would love to score a set.
Thanks! Good luck
Great video.
Thank you!
I don’t comment much on videos but yours was professional and detailed….nice job
Thanks!
Got these. Low beams (dipped in UK) were faulty and just randomly turned on and off when they were supposed to be steady on. Halo and High beam were fine. Can’t wait 2 weeks for delivery for replacement. Shame - looked good when they worked.
I have 2016 Jeep wrangler in Canada. I installed as above. Once I shift to drive and release the park, DRL is on( both low and high beam are on ) 😂I got a lot flash from oncoming vehicles. So I have to drive low beam during daytime.
Great headlights . Hope to win them 🤲🏻
Good luck :)
These look amazing and would definitely be an upgrade on my current setup. Hope I win! 👍
Best of luck to you!
Great video. Was wondering how they are holding up now that you have had them on the jeep for some time now. I am in need of some new lights because my current LEDs are very unreliable. I like the looks of these a lot but don't want to deal with another finicky pair. Thanks!
Hey! So I haven’t had any issues so far. No flickering, no fading, and just as bright as before. I’m very happy with them
Wow looks amazing I made my choice
Awesome!
You know if it's the same plug and play as the 2018 model? I want to swap these on my miata since I prefer the middle LED compare to the other model
Just bought my pair
Hope you like them!
Can you give me the name & model or link to these lights. They look promising. Do you know if they make fog lights to match?
Do you have a video of how to hook up the daytime running lights?
My crappy amazon headlights stopped working not long ago! I need these so bad ! And great video to add to it
Thanks - and good luck!
What do i need to install these once i've purchased them?
Those look great! Hoping I can win a set 🤞😆
Best of luck to you!
I picked these up after watching your video, and really like the look of the lights! Unfortunately they don't seem to fit very well on my 2018 JKU. Only one of the tabs in the headlight bucket/mount lines up with the LED light. I'm hoping to figure out what I can trim/adjust to make them seat properly.
So Sorry for the late reply!!Im sure you have the issue fixed by now, but if not the fix seems to be just putting on the retainer ring. It should balance everything out and hold it solidly in place regardless of the issue. Hope you were able to get them working!
did you find a fix to the issue?
Hello men, these headlights fits to my classic mini 7' inches headlights? Also do you know the headlights name to search them for Europe - Greece? thanks.
I have a 1985 Jeep cj-7. Will these work for my Jeep? Awesome video also. You earned a sub
Hey, thanks!! I checked the amazon listing and, according to it, they should fit👍🏼
Tactical JK alright, thank you very much
Will this work on a 20 JL ? If not, which do you recommend for a 20 JL? Thanks!
Hey, these lights look sweet! Any reviews of long term use?
They pass by my review. Halos and headlights are still just as bright, and haven’t had any issues with fading or flickering. Hopefully someone can provide a longer-term review than mine!
Great review., thanks. Which fog lights would you suggest to pair with these headlights? tail lights also please? 2007 sahara
I made a vid on the taillights, and they are great: ruclips.net/video/GOGIskrlpEc/видео.html
As far as fog lights, unfortunately haven’t test any!
Are these dedicated to Jeeps only or do you think they’d work on other vehicles with round 7 inch lamps?
Are these available for the 2020 gladiator? Got the gladiator sport
Are they available for Jeep Wrangler sport 2021? Not sure if it’s jl or not..
Will these work the same way in a Canadian JLU?
I have a 2006 liberty, do you think these will fit ?
Great video. What color (hot) wire did you tap into for the Halos from the front direction/markers @ 4:39
I didn’t tap into the front markers on the final setup, I tapped into the fog lights b/c of the way I have my jeep programmed. I am fairly sure that I tapped into the middle wire of the markers during the shot you referenced, but it did not work great as the Jeep set off a low light voltage check engine light, so I changed it. It might could work tho, but I wouldn’t recommend that method from my experience
I just installed a pair today can't wait for it to get dark
Great video and tips! I just ordered mine on Amazon through your link, but it's saying delivery is between May 22nd and June 15th? is that Accurate? Do you know what I can do to get sooner?
Thank you😁! But I’m sorry to say I’m not sure about the delivery times😞 You may want to try contacting Audexen directly through their social media/website.
Thanks! I got these, installing this weekend. I like your jeep, what size rubber do you have? Is it lifted? Thanks again!
Thanks!!! 2.5 in teraflex lift with 35 in stt pros!
@@TacticalJK I was hoping you’d say that! Beautiful, really like the stock rims but big look
I got this light after watch this video. installed, Lights look and work fantastic. Was able to fuse tap into a fuse Box for the DRLs as well. Thanks for the video and review!
But there is a problem, when headlight switch off, Low and High beam will be on when gear is not in P position. Everything is normal when headlight switch is on position. Do you know where is the problem came from? Thanks
Hey! It is likely that your Jeep is set to run the highbeams as a factory Daytime running light , so it sends power to the lights when the vehicle is in drive, but stops sending power when the vehicle is parked. This is not the normal setting for U.S.A Jeeps, but jeeps in many other countries are sold with that setting to meet regulations. It would have done that with the old headlights as well, if what I am thinking is true. If your jeep is set up to run the highbeams as DRL, then unfortunately the only way to turn that setting off would be to reprogram the Jeep.
I have the same problem. 😂 now my DRL is too bright and have to switch to low beam even driving in daytime.
Great videos. I have a 2016 JKU Sahara as well and I’m definitely doing the head and tail lights. I was just looking at the 305/70r18 Coopers too. What lift did you go with and do you like the ride? Thanks
Hey! I have a 2.5 in teraflex lift, I believe it is this one amzn.to/3DZ0y12 . I actually moved it from my old jeep, so it has been used for over 4 years and has held up great. I think it rides good, but i dont have anything to compare it too. I wasn’t able to tell a ride difference after switching from stock, but I didn’t pay too much attention to it.
@@TacticalJK thanks man!
Does this fit on a 2022 jeep witout any codification or dash light?
It would have been nice to have a little more detailed explanation on the electrical aspect of the installation...
Great job,, are they still working?
Btw how big are your tires and how many inch is the lift kit u have on?
Still working great! And 35s on a 2.5in lift
I have a 2017 Jeep Wrangler Unlimited Big Bear. I bought these Audexen headlights and fog lights with the halo light. I had my mechanic instal them but they are not working as fully intended. He tells me it's because my lights are computer controlled. Does anyone know a way around this?
How can it be that the LED ring is connected to the Blicker?
Great video.how are these lights holding up ?
Haven’t had any issues at all. No fading or flickering. Would recommend!
Have you noticed any major heat coming from the back of the headlight housing that has affected any of the Jeep wiring that is ran close to the back of the headlights once installed? I ordered a set but they fit so tight to all the wiring when pushed into mounting ring, I was thinking if they get hot it’ll melt some important wiring. As a rule, I thought LED lights produced a lot of heat that usually needs fans to cool them.
Hey! So I didn’t notice any issues when I took mine off a few weeks ago (to test some other stuff). I have had several 4 hr + night road trips with them on in the past few years. I don’t think they really get that hot.
How would these be in a snowy climate? I have hard that they do not generate enough heat to keep the lenses clear of snow, or frost.
Sorry for the late responses. They definitely don’t get hot like normal bulbs, so I doubt they could melt much snow or frost. Hopefully someone from a colder climate can chime in!
Did you have any problems With your headlighs?
Are you still using them?
Regards mauro.
I'm confused about your statement on the wiring of the DRL. You mention you don't have fog lights on your bumper, but you installed them on that wire harness? You show the blinker light, did you power the DRL off that? What slot in the fuse box exactly did you use before as you mentioned the easier method?
For my setup i wired my drls into my fog light wiring harnesses , and then programmed my jeep to run the fog lights at all times, so the drls stay on. For the wiring in the fuse box just search up jeep jk halo wiring on youtube because i do no remember, thanks!
Do I need to buy more wire for the halo lights?. Love these
I think they come with enough wire, but a fuse tap might be a good purchase for the fusebox connection!
These are sick ! How are they holding up?
Good so far! No issues with fading or flickering. Would definitely still recommend
Hey man great video ! thanks for sharing
I just need your help to choose the right color are the headlight installed on your jeep the patent black or silver color
on amazon there is 2 version of those and I am confused which one to choose
I have a jeep willis 2016 rhino color
I like the one you installed I guess they are the one with the patent black kindly confirm
thanks for
Hey! I have the black ones
@@TacticalJK thanks a lot man
will get the same :)
How do you get just the LEDs to come on by themselves? I hooked up into the fuse box. The only time the LEDs will stay on by themselves without the headlights is when it's in neutral. Soon as you take off emergency brake the lights come on
Your jeep is probably set to run the main beams all the time as DRLs. That's not standard for USA jeeps, but USA jeeps can be configured that way way to fix that would be to get a JSAN tool and change your jeep's DRL setting.
wondering how these lights are keeping up since you installed them few months back. Thanks.
They still are working great and looking the same. No change that I can tell
How you can conect the day time running lights to work with the low beam light?
That is their default. The drl ring will always shine with the low beams, even if you don’t have drl wire connected to anything.
Do you have a video with the change of this mask? (Black and grey)
Hey! Im afraid I don’t understand what you mean
Have you had any moisture buildup in the headlights yet? Thats kinda a concern for me. Im yet trying to decide wht headlight and taillights to go with. Im liking your headlights and taillights alot.
I would definitely still recommend both. No issues with any moisture in either the headlights or taillights👍🏼
@@TacticalJK thanks!
I got these for pretty cheap and am Curious why I can’t get them straight. The middle light is slightly slanted as it doesn’t fit properly. Any tips? Great video btw
Hey! I am not sure about getting the straight, I only know how to adjust them horizontally and vertically. I might would try getting them aligned straight (even uf they don’t fit in the notches right) and then tightening the retaining ring down in whatever position they are in. I would think the retaining ring could hold it in place even if everything doesn’t align perfectly in the brackets. Hope you are able to get it working!!!
thinking about picking up these lights. How are they holding up thus far. My last amazon halo lights burnt out .
No issues so far. The halos don’t seem to have dimmed any, and the lens shows no signs of fading. Would definitely recommend 👍
Hey dude,just got the exact same headlight as yours, put it on this evening, the new LED headlight seems project much higher light than the stock headlight, wondering if you had the same issue, is there any solutions? Tried the Headlight adjustment next to the hazard, still too high, there's two screws inside the headlight cup, tried, that only adjust the headlight from left to right slightly
Hey! So you tired the adjuster that I used at 5:00 in the video? Thats the only way I know to bring them down, but it had a ton more adjustment than I needed in my case
Do these lights cause glare for oncoming cars - I’ve previously brought led 7inch for my Jeep and despite adjusting to correct height, the light pattern causes glare and I often get oncoming vehicles flash lights at me ?
Yes, I got a lot because of the DRL is both low and high beam on
Are they still working?
Thx for the video...got mine today after backordered. ? 2015 jku passenger side fit in the bucket fine but drivers side tabs don’t want to seat in the bucket around the 10-11 o’clock position leaving a gap. If anyone has any info or pictures I’d appreciate it. Thanks again
Hate that your having an issue with the lights :( I would try tightening on the retainer ring over the lights , as it should hold the headlight in place regardless of the fit. It may actually force the tab into place once you get it secured. Just something to try - thanks!
Tactical JK Thanks I did that and it did close the gap a I think the back of the light is hitting either the bucket or something behind it and I can’t get a good angle to see. I’m not a fan of jeeps headlight holding, aligning, and positioning design. I do like the lights and if they hold up it’ll be worth the effort to get them to fit
Didn’t really wanna go through all the comments but would they fit a 22 wrangler jl
not without an adapter, they do have adapter kits though if you wanna
Would love to win a pair of these!
Good luck!
Just curious I ordered the same lights for my 14 JK and the tabs of the light won’t fit in my housing correctly. Did you come across this problem or is there anything you would recommend?-Thanks
If they don’t fit but are close, you may be able to mount the retainer ring and secure them in place anyway! I don’t think the fit has to be 100% as long as the ring goes on, but idk for sure.
Anyone have trouble getting these to fit? I have 2012 JKU. Only two of the three tabs will seat correctly. The top left tab is about 5-6 mm away from seating. Any thoughts?
You will have to enlarge the black mounting bracket in order for the headlights to sit flush.
Just got mine, but they don't quite fit. Did you have to buzz any part housing to make them fit? I have a 2015 wrangler JK.
Hey, several others have unfortunately had this issue, where one of the tabs doesn’t exactly fall into place. The best strategy is to just put on the retainer ring. The retainer ring should hold it solidly in place regardless of the issue. Hope you are able to get them working!!
how did you get your jeep to run the daytime lights from the fog lights whenever its on?
I reprogrammed the jeep using the JScan app and a Bluetooth obd2. There is an option on there to set the DRLs to high beams, low beams, fog lights, turn signals, or keep them at the default of off. I used the same setup to recalibrate the speedo and some other cool stuff. If you search up “JK gear and gadgets jscan” he has a good video on it👍🏼
Do you know if these are available for a 2019 JL?
Yes they are, here is a link: amzn.to/2LtlEeh
How did you run them into the relay? I’m trying to set them up on mine but I don’t want to plug it in wrong and mess everything up
Hey im not sure exactly what you mean! If your talking about the connection to the fuse box (which I didn’t do but most people probably will) this clip from another video might help! ruclips.net/video/yuwAhUSXtvU/видео.html
What front bumper do you have? Looks nice
Thanks! Its a smittybilt XRC MOD front bumper! I made a review video for it a few years ago if your wanna check it out ( really old vid tho😬). I have been happy with it!
Are those headlights the black or silver ? I’m looking to buy the exact ones you got on your JK
They are the black ones