Replacing Cub Cadet Drive Shaft Bushings. Vibration Problem!
HTML-код
- Опубликовано: 12 сен 2024
- Today I replaced the bushings on my Cub Cadet 1210/680. I have been trying to get this tractors vibration taken care of for a while and this helped a lot.
This set up is the same on most, if not all of the of the 82 series hydro tractors. Plus many other Cub Cadet hydro's.
The easy out size I used to remove the rear bushing is 1 1/16th
The socket I used to install bushings is 13/16th.
Bushing part number 941-3004
Price $15 for 4 count on ebay. 2 need for repair.
Flex Coupling/Rubber Isolator pn 722-3000
Price $15.76 plus shipping from parts tree. 4 needed if they are damaged or you feel they should be replaced.
Thank you for watching! Please like and subscribe. Comment below.
Never seen an EZ-out used to remove a bearing race. Made it look easy! Thanks for the tips!
I did my other tractor without the ez-out and it is a pain to get out. Luckly I had a box of "junk" laying around with that ez-out in it. Thanks for watching!
Your method worked for my older, narrow frame too: free up the flex coupler in the back, unbolt the hub adapter, unbolt the engine, slide the engine forward, and then the cranck shaft is free. Actually I did shaft work from underneath my tractor but I'm pretty small guy -- won't work for big guys.
Thank you that's exactly what I needed to know.
Awesome! Thanks for watching
Great video thank's 👍
Thank you!
Looks easy enough, thanks
That was awesome. You rock!
Thanks for watching!
Ive taken bushings out that way with big taps before lol. Whatever it takes right.
Lol if it works why not
Well this is what I did. I ran on top of a piece of petrified wood and got the mower off balance. One we got it on the ground again it won't reverse nor go forward. Hmmmm what do you think I damaged? Thanks on advance!
Its possible that the roll pin broke on the rear drive shaft bracket. The drive shaft will spin but its not spinning the transmission.
What im talking about is at 1:49 on the video.