How To Clean And Maintain The Collet Of Your Flex Shaft
HTML-код
- Опубликовано: 24 окт 2018
- I often find that when using my flex shaft, the drill or burr is slightly wobbling in the hand piece and is not centred. This could be due to the fact that there is dust, dirt, polish, lemel stuck within the jaws of the hand piece. Using nylon brush pipe cleaners to clean the inside of the collet just may help.
Here are the brushes amzn.to/2ENnoP4
THE EQUIPMENT I USE TO VLOG
Sony RX100 V : tinyurl.com/ybbqxg8j
Canon 70D, Body; tinyurl.com/j89xw2h
Canon Lens 10-18mm; tinyurl.com/gncnrwz
Tripod for Canon; tinyurl.com/hdhuz6z
Memory Cards; tinyurl.com/z8mhuk4
Card Reader; tinyurl.com/z97tccx
Microphone, Cheap; tinyurl.com/hbxtthg
Microphone; tinyurl.com/zpjpoeq
Canon G7X Camera; tinyurl.com/jkvu4b4
Tripod for G7X; tinyurl.com/z27m9aj
Mini Tripod; tinyurl.com/he93omu
Mavic Drone; tinyurl.com/jfh9da4
360 Camera; tinyurl.com/jbmrugq
Andrew shows you many hints and tips that he has gained from his experience as a professional goldsmith.
Andrew Berry, a professional jeweller for 30 years, is the training director of www.AtTheBench.com, an award winning on line jewellery training website. Хобби
Very good point with cleaning the hand pieces. Got the Type 30 I think with my Foredom. Ive just ordered the quick release handpiece. Thanks Andrew.
Brilliant! Many thanks for sharing, Andrew!
Good tip. Thank you for sharing it!
Great tip. Thank you for sharing. 😎🇨🇦
I would likes video on how to use a flex shaft and understanding all the different bits and what they are used for
my no. 30 hand piece part that you tighten w ith chuck keeps falling out what do you think ,,,brand foredom sr low dollar model,,,,thanks for and advice
Hi Andrew, is there as such to open up the hand piece for a good cleanup and lubrication?
I got water splash on mine, later on it got stuck and really got me worried, I was able to open partially at least get the most grit out of it, it moves fine now but seems a bit noisier than before, and for some reason I just can't find a tutorial video for this.
How to clean inside of the flexible black cover that covers the inner wire specially inside the ingco flex shaft
Andrew, you mentioned compressed air, I've been told that compressed air is not a good idea for these type of uses as it can drive grit into the bearings - Ouch!
Who disliked the video? Or rather why did they dislike it?
Squirt some WD40 or silicon grease in the Chuck before cleaning, the grease will loosen the dirt.
Those are called bottle brushes. Pipe cleaners are smaller and different than what you are showing. They are usually white and probably work much better than those