DIY Hydroponic Garden w/Arduino and IoT

Поделиться
HTML-код
  • Опубликовано: 27 ноя 2024

Комментарии • 81

  • @letsdeuxthis
    @letsdeuxthis 3 года назад +12

    What a fantastically well edited video. thank you so much for making it! I've been thinking about this for a while!

  • @rory2001
    @rory2001 3 года назад +22

    Great stuff! I would like to do the more in-depth course for this for sure. I actually am working on something very similar, including rotation.I was thinking of including computer vision via an openmv h7 for tracking crops and allocating sunlight via rotation based on users harvesting trends. Also i was going to use a solenoid for auto-topup and a ec meter with peristaltic pump for auto dosing + a ph for balancing (i know you said its not needed so i will reconsider that). There was a lot of good idea here i would like to see more!

  • @advongunten
    @advongunten 3 года назад +7

    Great video! You should add a diode across the relay otherwise it will blow your arduino-pin because of the reverse current, when the relay releases. Or better a transistor between ardu-pin and relais.

    • @et.sachin
      @et.sachin 3 года назад +3

      Didn't he use a relay module? I'm guessing that diode comes built-in.

  • @cschmitz
    @cschmitz 3 года назад +3

    This vid is awesome! Thanks for showing this project overview. It's cool seeing the two projects here: the garden project and the video editing project :)

  • @user-uj5rx9dj1p
    @user-uj5rx9dj1p Год назад +3

    This is really great!!. I am really waiting for the full series which you mentioned !!. Thank you so much.

  • @Techknowdude
    @Techknowdude 11 месяцев назад +1

    Cool project. It covers everything I wanted to monitor for a system I'm designing. I would suggest using a PVC pipe and heat forming cup holders. This could be a lot faster and less material intense. 400 grams per grow section seems pretty wasteful to me.

  • @sebbe95m
    @sebbe95m 3 года назад +3

    Great job with the description of hydroponics ! :D

  • @fabianlotter1802
    @fabianlotter1802 Год назад

    I rate a full-depth video as well!

  • @hydroponicsdocumentation7671
    @hydroponicsdocumentation7671 2 года назад +1

    thankyou for making this video..this helps me alot in my study through IoT

  • @7STUDMUFFIN7
    @7STUDMUFFIN7 3 года назад +2

    would love the more in depth course! thank you for the information

  • @shannonrobertson7212
    @shannonrobertson7212 Год назад

    OMG I finally found the perfect video!!! I have a couple adafruit moisture sensors for automated watering (i'm trying to learn as an adult so the instructions at a childs level is perfect!) my husband and I actually made 2 hydro towers for the deck from this over 50 crafter!!! My issue is forgetting to check the water level one day and it's completely empty. I was curious how/what was the best water level sensor!! Hydro is so the way to go I have given up in soil based gardening in Colorado. it's just a waste of time.

  • @leizhao4852
    @leizhao4852 3 года назад +2

    thank you What a fantastically well edited video.

  • @pranjalpatil3360
    @pranjalpatil3360 3 года назад +4

    this is amazinngg! I would love a detailed video on the making of it too!!! pls :)

  • @five969
    @five969 3 года назад +6

    Hey , would love the detailed version of this video , will be ton of help , I am sure many more must be interested in same , please do it

  • @UrbanWindowFarmer
    @UrbanWindowFarmer 3 года назад +3

    Great hydroponics content! Thank you for sharing. Continuing to follow your channel!🍃 🌾🍃🌿🌵🥒🌱🍃🌿🌵🥒🌾

  • @MsApril-vo7iz
    @MsApril-vo7iz Год назад

    Definetly would be interested in more

  • @surajsurya1928
    @surajsurya1928 3 года назад +3

    Great tutorial...keep doing dude👍😍

  • @brandonbarr2784
    @brandonbarr2784 3 года назад +3

    THC hydro, keep it up

  • @firaskhamis5075
    @firaskhamis5075 Год назад

    Please make multiple parts detailing all the parts of building this project

  • @er.kamleshlal6690
    @er.kamleshlal6690 3 года назад

    Please make a video on making an economical tower garden at home

  • @shannonrobertson7212
    @shannonrobertson7212 Год назад +1

    What kind of filament did you use? I have a couple planters in PLA that have been great but I wonder if all this water running through it should be printed in PETG?

  • @othmanekaramat1962
    @othmanekaramat1962 2 года назад

    Great video, please more In depth

  • @carautomotive2508
    @carautomotive2508 7 дней назад

    What would be the budget of this project

  • @mariusmaxximus1520
    @mariusmaxximus1520 Год назад

    I would love to see an in-depth video!!

  • @davidjobe9876
    @davidjobe9876 3 года назад

    That is a nice project ;)
    Isn't it better to check the water level first?
    Otherwise the pump may run dry.

  • @abdelrahmankhalil8878
    @abdelrahmankhalil8878 3 года назад +1

    Yes please do an in deptg one

  • @tempest031
    @tempest031 2 года назад +1

    I used an ultrasonic module to get water levels

  • @Mansjushereinnit
    @Mansjushereinnit 12 дней назад

    Hello, is it possible to get the CAD Files to download and edit?

  • @liannaesquillo3810
    @liannaesquillo3810 8 месяцев назад

    Is there an alternative material for 12" eTape Liquid Level Sensor?

  • @moonburns
    @moonburns Год назад

    is there going to be a longer series? Really great video

  • @pokpongthayawiwat7738
    @pokpongthayawiwat7738 10 месяцев назад

    where is the enclosure going to go

  • @uniskin
    @uniskin 5 месяцев назад

    Hi, I couldn't find the STL files. Can you help me find them?

  • @lollipop1488-b7p
    @lollipop1488-b7p 11 месяцев назад

    post deeper video!
    nice project!

  • @truptishetty9156
    @truptishetty9156 Год назад +1

    Can you please help me with my hydrophonic gardening project and provide me the source code of your video

  • @markshirwenaringo
    @markshirwenaringo 7 месяцев назад

    How much did you cost to make all of that?

  • @-iIIiiiiiIiiiiIIIiiIi-
    @-iIIiiiiiIiiiiIIIiiIi- 2 года назад

    10:48 WOAH! Hold your horses there padre! No solution is final! Chill out!

  • @BofM
    @BofM 2 года назад +1

    At 32:07 it shows STAGE 2 code. Line 87 says: else if ( (state == 2) && (pumpState = "Off")).....
    This code will run regardless of pumpState as it assigns instead of compares.
    Should it not read: else if ((state == 2) && (pumpState == "Off")) ???
    Or does the string library do things differently?

  • @wyzurd
    @wyzurd 3 года назад +1

    I'm great at building and designing, the programming language on the other hand....

  • @robertkamau8173
    @robertkamau8173 Год назад

    Very nice I would love to see the code

  • @nhunguyentranquynh2772
    @nhunguyentranquynh2772 2 года назад +1

    I'm wondering which 3D modelling software did you use in that video?

    • @programmingelectronics
      @programmingelectronics  2 года назад

      It's Fusion 360

    • @andrewbell6698
      @andrewbell6698 Год назад

      can you share the CAD files? @@programmingelectronics

    • @programmingelectronics
      @programmingelectronics  Год назад

      @@andrewbell6698 We have them for download at the post link in the description - you just have to scroll to the bottom of the post - should all be there. Best of luck!

    • @andrewbell6698
      @andrewbell6698 Год назад

      @@programmingelectronics I don't see any assembly drawings, just stl files. How did you create the source drawings in your video?

  • @disappear1234
    @disappear1234 3 года назад +1

    Can you put your stuff on other platforms as well ,RUclips is not recommending me my subscription videos at all

    • @michaelcheich2481
      @michaelcheich2481 3 года назад +1

      Which other platforms are you using?

    • @disappear1234
      @disappear1234 3 года назад

      @@michaelcheich2481 LBRY

    • @programmingelectronics
      @programmingelectronics  3 года назад +1

      We will look into that, in the meantime you can click the bell icon to get notified when we release new content.

  • @camplays487
    @camplays487 3 года назад +1

    What about aquaponics?

  • @martinlob8501
    @martinlob8501 2 года назад

    please, can you post the link to stl files? I cannot find hem on your web page.

  • @sgomezroman
    @sgomezroman 3 года назад

    Gracias por el aporte.
    Please subtitle in spanish

  • @shreerakshakv2067
    @shreerakshakv2067 3 года назад +1

    hello , link to lesson is not working help me

    • @programmingelectronics
      @programmingelectronics  3 года назад

      Thanks! Corrected!

    • @shreerakshakv2067
      @shreerakshakv2067 3 года назад

      @@programmingelectronics thankyou , but thinker circuit links are expired error shows to get a new link. help me!

  • @ebraheimpasha7246
    @ebraheimpasha7246 Год назад

    i cant access the 3d printing files please help!!!!!!!!!!!

  • @MacetazzOpina
    @MacetazzOpina 3 года назад

    wheres the link to the walkthrough

    • @programmingelectronics
      @programmingelectronics  3 года назад

      3rd Link down in the description below:
      ***Get the code, transcript, challenges, etc. for this lesson on our website***

  • @dannymill792
    @dannymill792 7 месяцев назад +1

    Like this comment if you want a multipart series of this

  • @ZeroCarbo
    @ZeroCarbo Год назад +3

    this is so booooring, alot of ads ads,go click, go buy, bla bla bla,

    • @backtobackcosmicflash
      @backtobackcosmicflash 10 месяцев назад

      Use revanced. Your welcome

    • @jacknesbitt240
      @jacknesbitt240 5 месяцев назад +1

      They give you free education and you are annoyed about them advertising other similar or helpful courses?