I have a question, I want to use Micro-ros in my device. I am also connecting an esp32 and an Arduino Mega to my system. I am doing serial communication between esp32 and Arduino Mega (RX TX). Will my esp32 be able to communicate with my laptop and the esp32 at the same time ?
Theoratically yes not a problem for - Serial COM with Mega then Wifi Com with Laptop how ever it totally depends upon the bandwidth and frequency you are using for the task but it will slow down for higher freq-bandwidth , still will keep connected :)
I love this tutorial! I have a Portenta H7 that I am working on getting up and going with Micro ROS. Following your tutorial, I receive an interesting failure during debugging, any thoughts our comments would be appreciated! (Windows 10) Configuring portenta_h7_m7 with transport serial Downloading micro-ROS dev dependencies - Downloaded ament_cmake - Downloaded ament_lint - Downloaded ament_package - Downloaded googletest - Downloaded ament_cmake_ros - Downloaded ament_index Building micro-ROS dev dependencies Build dev micro-ROS environment failed: '.' is not recognized as an internal or external command, operable program or batch file.
Assalamuwalikum, Thank you very very much !!! I really really appreciate your work and help. I was stuck for a week with installation, where as your efforts benefits me enormously. I would like to ask you something, "Could you please make a video that blink LED light using ESP32 board and LED light can be controlled with ros2 pub_&_sub?". I wish you best of luck, Allah bless you!!! Thanks, Simon
i downloaded docker in my windows as in one of your previous videos can you briefly explain how i can install microROS using VS code in my windows and docker... pls reply ....
Hello, I have problem with connect via udp, If i "ros2 run micro_ros_agent micro_ros_agent udp4 --port 8888" sometimes it works, sometimes it doesn't. Do you have solution?
Assalamualaikum sir, i try this on arduino ide using wifi communication in esp32 wroom32d i got error guru paniced with some backtrace. But it will work properly on diffrent board
When I build the platformio on my device I am getting this error: ImportError: cannot import name 'OVERRIDE_OPT' from 'em' (/home/ibrahim/.platformio/penv/lib/python3.10/site-packages/em.py) The Python package 'empy' must be installed and 'em' must not be installed since both packages share the same namespace. I tried to reinstall empy and remove em but nothing changes, I am using Ros2 humble and platformio in vscode and python3.10
jazakallahukhayran ive been reading for hours and your 15 minute video explains everything
Alhamdullilah :)
MicroROS is amazing, make more videos on this topic please! 😊
Thank you! Will do!
As always ! Fantastic video
Thanks again!
Your videos are incredible, im learning a lot about ros2 and robotics in general. It is helping me in my personal project. Thanks, from Brazil
Your welcome from Pakistan :)
As always, great video!
Thanks again!
Thank you for this video. Your explanation is amazingly clear. This is very inspirational.
Thank you
As always ! Fantastic video
Thanks again!
Great stuff! MicroRos is awesome
It really is!
thanks a lot mr. Muhammed.
:)
Thank you, great tutorial!
Can you connect mico ros agent via udp ? I can connect but sometimes it works, sometimes it doesn't
@@Hailongfilm I havent tried it udp only serial, could you clarify what happens exactly or the error logs
You're very welcome!
Yes i have shown it in video
Thank you bro !
You're welcome!
This guy is a gem 💎
as you are :)
I didn't see any micro ros topics while doing ros2 topic list, but I'm getting output in another window.
Export Domain ID and make sure you are on Same Access Point ( WIFI)
can you plz make a video of wifi enabled and control and how to control multiple micro Ros robot like swarm by the by nice video really informative😍
I will add your request on the List
I have a question, I want to use Micro-ros in my device. I am also connecting an esp32 and an Arduino Mega to my system. I am doing serial communication between esp32 and Arduino Mega (RX TX). Will my esp32 be able to communicate with my laptop and the esp32 at the same time ?
Theoratically yes not a problem for
- Serial COM with Mega then Wifi Com with Laptop
how ever it totally depends upon the bandwidth and frequency you are using for the task but it will slow down for higher freq-bandwidth , still will keep connected :)
I love this tutorial! I have a Portenta H7 that I am working on getting up and going with Micro ROS. Following your tutorial, I receive an interesting failure during debugging, any thoughts our comments would be appreciated!
(Windows 10)
Configuring portenta_h7_m7 with transport serial
Downloading micro-ROS dev dependencies
- Downloaded ament_cmake
- Downloaded ament_lint
- Downloaded ament_package
- Downloaded googletest
- Downloaded ament_cmake_ros
- Downloaded ament_index
Building micro-ROS dev dependencies
Build dev micro-ROS environment failed:
'.' is not recognized as an internal or external command,
operable program or batch file.
do not know whats that.
I want to build one much larger to sweep and clean my floors.
build it then :)
Assalamuwalikum, Thank you very very much !!! I really really appreciate your work and help. I was stuck for a week with installation, where as your efforts benefits me enormously.
I would like to ask you something,
"Could you please make a video that blink LED light using ESP32 board and LED light can be controlled with ros2 pub_&_sub?".
I wish you best of luck, Allah bless you!!!
Thanks, Simon
Walaikumsalam.
i downloaded docker in my windows as in one of your previous videos can you briefly explain how i can install microROS using VS code in my windows and docker... pls reply ....
Gona take time
Hello, I have problem with connect via udp, If i "ros2 run micro_ros_agent micro_ros_agent udp4 --port 8888" sometimes it works, sometimes it doesn't. Do you have solution?
Check ESP32 , is it working fine
thanks for your tutorial but I can not register account on your website
Try now
Assalamualaikum sir, i try this on arduino ide using wifi communication in esp32 wroom32d i got error guru paniced with some backtrace. But it will work properly on diffrent board
It is for PlatformIO only
Arduino ide will not work
Can we use esp8266 instead of esp32?
Check the MicroROS Wiki for that .
can you pls give the buying link for esp32?
ESP32 Dev V1 module
Sir I'm facing problem in microros communication with esp32. Can I mail it to you?
If yes please provide the id.
Post it on ROS robot exchange stack and provide link here
because there are more knowledgeable people than me as well :)
@robotisim sir the link is vanishing automatically from comment section
Esp32 stop receiving data through microros
I have posted it there with above title.
When I build the platformio on my device I am getting this error: ImportError: cannot import name 'OVERRIDE_OPT' from 'em' (/home/ibrahim/.platformio/penv/lib/python3.10/site-packages/em.py) The Python package 'empy' must be installed and 'em' must not be installed since both packages share the same namespace. I tried to reinstall empy and remove em but nothing changes, I am using Ros2 humble and platformio in vscode and python3.10
Strange . Provide details of ROS Stack Overflow . With screen shorts and logs
So i can understand what is going on .