This building just continues to have some issues that I can't wrap my head around. Hopefully once I go through the clutch it calms down a bit. Thanks for watching.
@@Idontknow-mf7tx yeah, you can't jump or fall over guard rails. sometimes the invisible barriers are annoying when you want to take a shortcut but you gotta admit the security it brings is pretty nice in this scenario. actually though walking on a sidewalk is more dangerous. elevators typically have a minimum of 3 systems in place to keep the elevator from freefalling plus theres usually some sort of spring/cushion/crumple zone that will dampen the impact even if it does. stepping off into that open shaft space is actually kinda hard to do, theres a bunch of equipment in the way for starters and even if you do manage to fall off somehow theres at least 5 things you can grab onto.
@@foogee5403 oh yeah true that. < 1 inch gaps can be scary. see deviantollam's video titled with something like pit to penthouse. iirc they showed a good demo on one of the slides, and is otherwise very easy to understand and entertaining.
That PCB control panel is something, reminds me of fire alarm & security panels. These look super fun to work on like working at food processing plant.
@@satoshiaaron I have no idea why thats a bad thing (from context I assume its a shitty controller), but from now on "until they put a Schindler 3300 in there when they rebuild it" is my default response to anything along the lines of the original comment whether its about elevators or not! 🤣🤣🤣
Car guide rollers could be worn and shifted the car. Rollers should be 1/4 inch away from clutch. Clutch should grab 1/4 of the front roller MO Assemblies should be pinned after adjustment
My friend who works in the physical penetration testing department of our company is forever hiding in elevators. He takes them out of service and sits in them reading a book and now matter how many times we warn clients that this is vulnerability it is pretty much guaranteed that around 14.00 I will send him a message saying "hey Pete how are things going?" Only to get a picture back of him reading a 40 K novel inside an elevator somewhere with a very smug grin. 😊 At this point, people normally say - well you can’t do much from inside the elevator can you? ….. well you can wait there till everyone goes home and then steal everything. That’s like a general starting point, every time you press the call button you never know which elevator of the bank will come for you so if you are a security guard doing an end of shift patrol then you are just waiting for any elevator not a specific elevator! so if one has been taken out of service, you will not know.
The amount of slop in those cab gussets are your problem. The cab shouldn't be shifting that much when you manually operate the doors. Allows the cab to shift back and forth while its moving and can trip interlocks.
How do you like those cedes selectors? Ive got a few and they seem super solid. I dont mind GAL stuff but it seems super old school compared to smartrise or pixel stuff
They are okay. Nothing - and i mean absolutely nothing - in the moon proprietary market beats a galaxy 3 that is adjusted properly. They made em too good. G4's have their ghosts just like the rest of them :)
![BabyChiefDoit - Too Slow (feat. STAR BANDZ) [Official Music Video]](http://i.ytimg.com/vi/zayaxws7RPg/mqdefault.jpg)
I don't know why, but RUclips has decided that today I'm going to watch this Canadian guy inspect an elevator. I can't say anything against it.
he's pretty good eh? lol
Thanks for watching
Thats spirit
Just seeing people in the hoistway makes me anxious even if they're professionals
despite appearance, the top of that elevator is probably the safest spot to stand in the entire building.
@2kadrenojunkiegaming655 yeah, there's even a guardrail
@@Idontknow-mf7tx yeah, you can't jump or fall over guard rails. sometimes the invisible barriers are annoying when you want to take a shortcut but you gotta admit the security it brings is pretty nice in this scenario. actually though walking on a sidewalk is more dangerous. elevators typically have a minimum of 3 systems in place to keep the elevator from freefalling plus theres usually some sort of spring/cushion/crumple zone that will dampen the impact even if it does. stepping off into that open shaft space is actually kinda hard to do, theres a bunch of equipment in the way for starters and even if you do manage to fall off somehow theres at least 5 things you can grab onto.
Not quite talking about falling, it's more all of the crushing hazards for delicate human limbs, but you are right.
@@foogee5403 oh yeah true that. < 1 inch gaps can be scary. see deviantollam's video titled with something like pit to penthouse. iirc they showed a good demo on one of the slides, and is otherwise very easy to understand and entertaining.
First time viewer and I haven't heard that many "ehhh"'s since Strange Brew
he might be Canadian
@@crazy-es8tr
same here, and I'm from WI.
Knocking on the lift in the next shaft 😅
those people probably think that there's a ghost in the elevator lol
That PCB control panel is something, reminds me of fire alarm & security panels. These look super fun to work on like working at food processing plant.
Give me the guy with the lever to work the door, gate and motor
" floor please ? 🥺❤️"
Everyone under 90 is like " WTF is he talking about ? "
*grabs random-looking handle on the side* Deck 8. *lets go*
Unless some have seen a movie depicting old times with elevator handler._
Building defective, recommend replacement
You say that until they put a Schindler 3300 in there when it is rebuilt 😱
@@satoshiaaron I have no idea why thats a bad thing (from context I assume its a shitty controller), but from now on "until they put a Schindler 3300 in there when they rebuild it" is my default response to anything along the lines of the original comment whether its about elevators or not! 🤣🤣🤣
You tube algorithm at work. Canadian elevator repair.
Yeah this was on my YT front page
Thanks for watching
@@MQElevators thanks for keeping the elevators working!
Still interesting stuff
Car guide rollers could be worn and shifted the car.
Rollers should be 1/4 inch away from clutch.
Clutch should grab 1/4 of the front roller
MO Assemblies should be pinned after adjustment
I change mine when there gone
@@JohnB-nh8cm I know a guy that told me he been doing maintenance for 20 years and never changed a hanging roller.... 😂
Heres hoping that k400 uses the updated firmware....mousejacking an elevator sounds fun, provided Im not the one in the elevator....
My friend who works in the physical penetration testing department of our company is forever hiding in elevators. He takes them out of service and sits in them reading a book and now matter how many times we warn clients that this is vulnerability it is pretty much guaranteed that around 14.00 I will send him a message saying "hey Pete how are things going?" Only to get a picture back of him reading a 40 K novel inside an elevator somewhere with a very smug grin. 😊
At this point, people normally say - well you can’t do much from inside the elevator can you? ….. well you can wait there till everyone goes home and then steal everything. That’s like a general starting point, every time you press the call button you never know which elevator of the bank will come for you so if you are a security guard doing an end of shift patrol then you are just waiting for any elevator not a specific elevator! so if one has been taken out of service, you will not know.
I definitely have taking a break on the top of the elevator before while people use it.
The amount of slop in those cab gussets are your problem. The cab shouldn't be shifting that much when you manually operate the doors. Allows the cab to shift back and forth while its moving and can trip interlocks.
Elevators and escalators are a nightmare
Tell me you're Canadian without telling me you're Canadian
A
soory, ehh?
@@TankR 🤣🤣
I love how the number 6 inside the door is the wrong way round.
Great job at A Y
Dead door sensor was first thought._
If things go from bad to worse, could you say it's a..... ELEVATED SITUATION. You're welcome uwu
Why did you say uwu
@@iRunfastXC To escalate things, of course. Alright people-move it along now.....
@@iRunfastXCuwu
Im a furry
This is not what they meant by "lock nut" ...
Ayeee
Braydon ain't ready yet
my mechanic said i didnt make it till i got the uniform. on the lookout for the company polo for your helper
can you do a video explaining how an overspeéd governor is connected for the wiring
Check steading plates. Car may have shifted
Seriously RUclips? Canadian elevator repair at 3:46am, eh?... Subscribed...
They need all that wiring for a elevator? No wonder they break down all the time lol
Correction fellow elevator man. There is only one GOD. Stay safe.
How do you like those cedes selectors? Ive got a few and they seem super solid. I dont mind GAL stuff but it seems super old school compared to smartrise or pixel stuff
what are your thoughts on the Galaxy 4 controllers?
They are okay.
Nothing - and i mean absolutely nothing - in the moon proprietary market beats a galaxy 3 that is adjusted properly.
They made em too good.
G4's have their ghosts just like the rest of them :)
10:06 Really adjustable wrench.
aussie shifting spanner
They need all that wiring for a elevator? No wonder they break down all the time lol
That control panel's got some neat wiring. That UI is total crap though lol where's the touch screen at
Make a sacrifice to the machine spirit.
Looks like it might need more RAM
I really want to work with elevators...
AY
did you try putting it in rice?
This lift is out of service!
One day that will be me
The control panel looks like an unrealistic prop from a sci-fi movie.
This guy might not be from Canada🤷🏻♂️. Minnesota🤷🏻♂️ Nebraska🤷🏻♂️
some fellow canadians ehh
This reminds me of Speed.
Canadian a
Must be Canadian, eh?
canadian AAAAAAAA
"eh" ;) lol
ride it at full speed
I like seeing other people work.
i dont get why its called 'levelator' when it not only levelates but goes downards
Aye..😂
I don’t like gal equipment to many moving parts 😉🏴🇬🇧
Does anyone like gal?😂🏴🇬🇧
Are you joking? GAL is the best of the bunch. Fuck all that Selcom and Fermater shit.
I’m sorry I think you are wrong as an old Otis man our old stuff from the 60s 70s 80s would blow that crap out the water 🇬🇧🇬🇧🇬🇧
@@philipcollins3849 It was pretty similar though. I'd say Express and Bennie were better even then
why don`t you call someone who no`s what there doing
Pfft like to see you do better
"no's"
May I ask why you doubt their qualifications? :')
Does this make you want to use the STAIRS❓😂
Ayeee