Shogun isn't underrated but it had low fans bcoz of its mileage . Rx used to give descent mileage even after rash driving so it was people's first choice
Great video! Just picked up a 5speed gearbox (got it for 11.5k) and I’m going to convert my rx100 to 5speed. Will do the full 135 conversion after a while. Is there is huge difference in performance between the 4TL10 (5s) and the 4TL00? Is it worth the extra money?
It doesn’t work like that, a 5s carburettor n 4s engine will give slightly better mileage but if you put the 4s carb in 5s and don’t compensate for the extra fuel it will flutter. For increased fuel you have to increase air. This is just an example. 4s carb will work on a 5s without issues, unless you are high up in Himalayas
You need to research on sprocketing and based on that you need to let me know if you are looking for top end speed or initial acceleration. It will be easy to suggest post that
Sir I'm converting 135 4 speed to 5 speed. I changed it to 5 speed cylinder but using the old head (4tl00). Is it okay to use the same or do I need to replace it asap?
Bro one doubt without upgrading gearbox can we replace the cylinder of rx135 4 speed with 5speed cylinder for better power since there is 2bhp difference in stock condition ?I know it’s not that worth to do so but will it work?
Sir I am going to buy a new rx 135 5 speed...it's engine case no. Starts from 4TL not like 5 speed engine case no. 1L7....the bore carburettor cylinder no. Is all same as 5speed?....is there any changes in the engine or does any 135 5 speed comes with this engine case no.?....if u want I can watsapp u the photo
Is there any difference in gear shifter drums of 4 speed and 5 speed. info on this would be helpful bcoz people sell used 4 speed drums claiming to be 5 speed.
@@kkp8707 it’s not easy for someone to differentiate unless they know what exactly they are looking for. I have some key differences in a post on the Instagram page, details of the Instagram handle in the description of this video
Sir I have rx100 but I am going to do restore work I want good pick up what should I do shall I convert to rx 135 4speed or I just do restore work for rx100 ?? What should you suggest for pick up and mileage for rx 100? Also while riding rx 100 currently even at 50 speed I am finding it not stable enough
Rx 100 has better pickup than 135, you can increase the pickup further by adding a 16 inch rear wheel. It will impact top speed. You cannot have both power and mileage.
@ ok Sir also I noticed in my rx100 the carburettor 4TL01 is installed …does this affect the pickup as well??..also I asked the mechanic how much it costs for engine restore he said it costs 8k and if bore work needs to do it gets added separately he told so for good pick ip shall I change the carburettor as well..what the things should I check for better pickup for rx100 with same rx100 exhaust sound? Also restore affects the rx100 exhaust sound??
Engine knocking happens due to the mixture igniting before the full compression on the air fuel mixture, it can damage the piston, this is compensated by increasing the octane value of the fuel or introducing spacers in between cylinder and head, higher compression engines have their own uses.
My rxz cylinder block is 4tl00 and contractor is 55k00. My doubt is can't i make it as 5 speed without changing the cylinder block. If i can change what problem will i face without changing the cylinder block
Hello sir I own 4speed ... Does just changing 4speed gear box. Into 5speed gear box. Is worth ?? And also I go for long ride like 400km to 500km. Do u really recommend 5speed gear box for this. Or 4speed is enough
5th gear is good for touring and definitely better than 4S but if you enjoy riding your 4S during long distances then you will surely love the 5S experience
Now i want to know whether the clutch and magnet side case covers should also be changed or we can retain the 4 speed covers. Initially i want to install only the 5 speed gear box not the entire conversion such as cylinder,head,carb, silencer etc.
Sir, I have a 1998 Maroon RX-Z. It is restored last year. It's fitted with Goezete cylinder kit, other than that everything is pretty stock. Sir my questions are :- 1. Is Goezete Cylinder kit capable enough, like the original cylinder. I mean will it make the same 12 BHP and 12.25 Nm like the stock. And sir will it be good for the bike if we modify the bike, basic one, will the cylinder be able to cope up with this. 2. Sir if I just change the gearbox and Sprockets to RX-Z 5 speed, will it give about 90-95% feel and performance of an original 5 speed.
Sir can i add just 5th gear to 4 speed gear box? Ippol instayil 5th gear for sale nn parnj knunund ath ente 4 speed gear boxil add akan pettumo? Only aa gear mathrM add akiyal long touring comfort aaville?
Sir At 11.15 you said rx 100 crank is different from 135 4 and 5 speed, but at end you said all three are same. Bit confusing.. Could you please clear my doubt? Thanks
No it won't, you'll have to upgrade the entire block and gears to get the feel, 5s has 14 Bhp, Block no is 4TL10, for 4s it is 4TL00, so in order to get the 5s feel get the original block and gears.
@@boyfromthemountainsbut 4s has better initial than 5s which is due to 4TL00block so just using a 5s gearbox will give both, initial and better top speed right?
@@duke7571 gear box won't replace BHP, total power output of 5s is higher that 4s, since 4s has 4 gears the feeling of better initial is felt however dyno output would show that 5s is more powerful engine, to increase initial performance use a smaller type like the yesdi wheel, and tune as per initial pickup.
🙏and now im finally watching your video in english
👍
Informative as always !
👍
Waiting from long time
👍
Can you make a video on the special features of a Suzuki shogun especially high sprint gears , i feel like the shogun is pretty underrated
Sure
Shogun isn't underrated but it had low fans bcoz of its mileage . Rx used to give descent mileage even after rash driving so it was people's first choice
Very brief and good advice
👍
Thank you bro for the information and talking in English
👍
Salute to efforts and information provided
👍
Thank you bro 👍🏻
Very helpful video 🥰
👍
Super brother ❤
👍
Carb n sprocket gear teeth n all other many things got changes so its not possible to change unless u have a 5peed bike n than swap the parts
Don’t say it’s not possible, I have done it on multiple bikes
Great video! Just picked up a 5speed gearbox (got it for 11.5k) and I’m going to convert my rx100 to 5speed. Will do the full 135 conversion after a while. Is there is huge difference in performance between the 4TL10 (5s) and the 4TL00? Is it worth the extra money?
Of course, but 5 speed cylinder lacks the low end of an rx 100
@@Yamakazeu mean pickup?
@@mangertech6546 yeah
I have two questions on this.
1) initial acceleration difference bn 4s and 5s.
2) coil,cdi,ignition coil difference bn 4s and 5s.
4s has better initial acceleration, last model 4s and 5s came with similar magnet, the pulsar coil and the cdi was different
If i put only conversion kit 5th gears on 4 speed gearbox and 5 speed gear drum will it work fine as 5 speed
Yes
क्या RX100 को 5speedका गेअर बाक्स लगानेके बादमे आगेका चैन स्पाकेट चैज करना पडेगा या वही लग जायेगा
Same old would work
good job
👍
4s and 5s carburetor which works good for pickup
It doesn’t work like that, a 5s carburettor n 4s engine will give slightly better mileage but if you put the 4s carb in 5s and don’t compensate for the extra fuel it will flutter. For increased fuel you have to increase air. This is just an example. 4s carb will work on a 5s without issues, unless you are high up in Himalayas
Hello sir please tell me that in rx 135 4 speed which chain set is good 4speed one or 5 speed one
You need to research on sprocketing and based on that you need to let me know if you are looking for top end speed or initial acceleration. It will be easy to suggest post that
Can i use 4tl00 (4speed) cylinder and piston on original 135 5speed?
Yea
Sir I'm converting 135 4 speed to 5 speed. I changed it to 5 speed cylinder but using the old head (4tl00). Is it okay to use the same or do I need to replace it asap?
You can
Bro one doubt without upgrading gearbox can we replace the cylinder of rx135 4 speed with 5speed cylinder for better power since there is 2bhp difference in stock condition ?I know it’s not that worth to do so but will it work?
It will, the powerband of a 5s is higher so you will loose the low end torque
Sir I am going to buy a new rx 135 5 speed...it's engine case no. Starts from 4TL not like 5 speed engine case no. 1L7....the bore carburettor cylinder no. Is all same as 5speed?....is there any changes in the engine or does any 135 5 speed comes with this engine case no.?....if u want I can watsapp u the photo
It’s not a 5 speed
Will it make any difference in performance if we just change the gearbox alone?
You will get an extra gear, engine will be little less stressed at 4th and 5th gear, slightly better top end
In standard rx100 engine ,
convert to 5speed gearbox .
It's make eney difference in performance
No
@@Yamakaze
Is converting 5 speed in rx100 is useful or waste
@@yamaharxmohamed5957 depends on your riding, if you ride on highway more then it’s worth it
Thank u bro
Iam in tamilnadu 630001
In my rx100 i notice that magnet slightly going in an out with crankshaft maybe 2mm
It natural in rx or eney
@@yamaharxmohamed5957 not natural
As usual nice informative video...
Bro is there any difference if I use 5speed head on a 4speed cylinder bore?As the vice versa u have said.
Compression
@@Yamakaze ha ha..confused... tnx bro for the reply..but will it increase my compression or decrease
@@biswanathmohapatra1836 decrease
Can we fit 5 speed engine covers in 4 speed
Yea
Is there any difference in gear shifter drums of 4 speed and 5 speed. info on this would be helpful bcoz people sell used 4 speed drums claiming to be 5 speed.
Not same
@@Yamakaze thanks for the reply. Any pointers on differences
@@kkp8707 it’s not easy for someone to differentiate unless they know what exactly they are looking for. I have some key differences in a post on the Instagram page, details of the Instagram handle in the description of this video
@@Yamakaze thanks a lot. Surely will check ur insta post.
@@kkp8707 👍
Can I put rx 135 5 speed . engine cover and magic cover in rx 100
Yes
Sir I have rx100 but I am going to do restore work I want good pick up what should I do shall I convert to rx 135 4speed or I just do restore work for rx100 ?? What should you suggest for pick up and mileage for rx 100? Also while riding rx 100 currently even at 50 speed I am finding it not stable enough
Rx 100 has better pickup than 135, you can increase the pickup further by adding a 16 inch rear wheel. It will impact top speed. You cannot have both power and mileage.
@ ok Sir also I noticed in my rx100 the carburettor 4TL01 is installed …does this affect the pickup as well??..also I asked the mechanic how much it costs for engine restore he said it costs 8k and if bore work needs to do it gets added separately he told so for good pick ip shall I change the carburettor as well..what the things should I check for better pickup for rx100 with same rx100 exhaust sound? Also restore affects the rx100 exhaust sound??
What is engine knocking?What are the possibilities?
Engine knocking happens due to the mixture igniting before the full compression on the air fuel mixture, it can damage the piston, this is compensated by increasing the octane value of the fuel or introducing spacers in between cylinder and head, higher compression engines have their own uses.
My rxz cylinder block is 4tl00 and contractor is 55k00. My doubt is can't i make it as 5 speed without changing the cylinder block. If i can change what problem will i face without changing the cylinder block
You can
What problem will i face if i do it
@@kishorers2744 no problems
Sir I have RX 135 4 speed I want to change a tyre in a bike plz tell me which tyre size preferred like 2.75X18 front and 3.00X18 rear tyre is it best
Yes
@@Yamakaze but sir stock size is 2.50X18 front and 2.75X18 is rear size so can I upgrade size
@@chandrakantmendhe7076 yes
@@Yamakaze Thank you Sir
@@chandrakantmendhe7076 👍
Hello sir
I own 4speed ... Does just changing 4speed gear box. Into 5speed gear box. Is worth ??
And also I go for long ride like 400km to 500km.
Do u really recommend 5speed gear box for this. Or 4speed is enough
5th gear is good for touring and definitely better than 4S but if you enjoy riding your 4S during long distances then you will surely love the 5S experience
@@Yamakaze I won't change cylinder carb CDI nothing.. I will just change gear box to 5speed. Is that okay.?
@@sanjaybabu9679 yep
Now i want to know whether the clutch and magnet side case covers should also be changed or we can retain the 4 speed covers. Initially i want to install only the 5 speed gear box not the entire conversion such as cylinder,head,carb, silencer etc.
@@kkp8707 other than the gearbox everything is cross compatible
do i have to change engine cover if i go on 5 speed
Not mandatory
Sir, I have a 1998 Maroon RX-Z. It is restored last year. It's fitted with Goezete cylinder kit, other than that everything is pretty stock. Sir my questions are :-
1. Is Goezete Cylinder kit capable enough, like the original cylinder. I mean will it make the same 12 BHP and 12.25 Nm like the stock. And sir will it be good for the bike if we modify the bike, basic one, will the cylinder be able to cope up with this.
2. Sir if I just change the gearbox and Sprockets to RX-Z 5 speed, will it give about 90-95% feel and performance of an original 5 speed.
Goteze is not that great. Changing the gearbox will set a solid platform for future modification
@@Yamakaze Then as per you sir which Cylinder kit is best except original cylinder kit?
@@Yamakaze And sir the logical reason, why Goteze is not that good.
@@bridgewalk7014 nothing comes close to original cylinder, aftermarket cylinders have port issues and casting issues
Hi sir..what is the ratio of rx 135 is this hi speed or low speed
Didn’t understand your question
Bro I want to buy one rx 135 5 speed orignal in good and stock condition if you have let me know plez
👍
Bro is it ok.. if i upgraded only gear box??
Yes
any advantages of using 4 speed head with 5 speed bore
If you want to increase compression for any specific application then it’s the simplest way to do it.
@@Yamakaze
Could you please tell me how this compression makes the difference in performance?
@@shivabharani8091 I will do a video on it
@@Yamakaze
Thank you.
Waiting for new video on this compression topic.
@@shivabharani8091 👍
If I use 135 4s magnet in rx 100 what will be differences on riding. It will be good or not?
It will not work
@@Yamakaze I didn't get?
@@Yamakaze kya kam nehi karega sir? Talking about light or something else?
@@souryaranjanmohapatra6835 the timing is different for rx 100 and rx 135
Sir can i add just 5th gear to 4 speed gear box? Ippol instayil 5th gear for sale nn parnj knunund ath ente 4 speed gear boxil add akan pettumo? Only aa gear mathrM add akiyal long touring comfort aaville?
Illa, shifter matenam
@@Yamakaze shifter matan rate ethre aavum approx?
@@Vintage.spare.hub_ ariyilla
In 5speed gear box free play is more than 4speed play
It’s not normal
Didn't understand
In 5speed gog engagement in gear the dog hole is only 3 steps In 5speed
Sir
At 11.15 you said rx 100 crank is different from 135 4 and 5 speed, but at end you said all three are same.
Bit confusing..
Could you please clear my doubt?
Thanks
Crank is same the connecting rods are different. There might be slight differences which I might not have noticed but 100 crank can be used in 135
Thank you for the reply.
You generate very useful videos for rx lovers.
@@shivabharani8091 👍
Converting Rx100 4 speed to 5 speed is it good
I will say it’s a good idea because what rx 100 lacks is the top end speed
Bro rx 100 il 135 nte side cover indan pattuvo bro
Yea
@@Yamakaze 5 speed nte cover rx100 il indan pattuvo bro
@@shahidshahidzyan1874 yes
I want to convert my rxg into rx 100 what should i do bro please make a video
What do you want to change on your bike? Rxg is a perfectly capable bike
@@Yamakaze just want to change it bro
@@nature.freaks.i would suggest you to just buy an rx100 engine, swap it with your Rxg engine
Priceee of converting 5s rx
Depends on what all you are converting
👍
👍
Bro any difference between rxg and 135 ?
Clutch, YIES, magnet and coil. Stock Rxz cylinder has slightly square ports
@@Yamakaze does yies sticker is there is rx 135
Yes, my 1998 RX 135 has it.@@aarongemon7716
5speed case iruka
No spare sales
Pls correct me if I am wrong.... converting 4s to 5s will get feel of orginal 5 Speed.
Of course, you will get the feel
No it won't, you'll have to upgrade the entire block and gears to get the feel, 5s has 14 Bhp, Block no is 4TL10, for 4s it is 4TL00, so in order to get the 5s feel get the original block and gears.
@@boyfromthemountainsbut 4s has better initial than 5s which is due to 4TL00block so just using a 5s gearbox will give both, initial and better top speed right?
@@duke7571 gear box won't replace BHP, total power output of 5s is higher that 4s, since 4s has 4 gears the feeling of better initial is felt however dyno output would show that 5s is more powerful engine, to increase initial performance use a smaller type like the yesdi wheel, and tune as per initial pickup.
@@boyfromthemountains I don't want more bhp bro. I just want initial of 4s and 15 to 20+ in topend
Apna fon nmbar do
Instagram only