What size and type of cables are used for all of that interconnections? And if meter is remotely placed, what size and type of cables should be used for the run from CT chamber to the meter, how cables should be protected, should cables be double insulated? Is that numbering on the cables industry standard or another identification of cables can be used as long as it clearly understandable? Your videos are really helpful.
It's 2.5mm heat resistant cable , in remote panels and through apertures DNO's use SWA to protect the wiring. The identification ferrells are usually standard use across the board but I have seen them marked previously with biro or sharpie etc .
Nice video thanks looking forward to the next CT metering videos
Good stuff Mark. I saw an EDMI Atlas Mk10A only yesterday and I was slightly curious. Good timing.
Bahut badhiya sir Ji 😊😊😊😊😊
What size and type of cables are used for all of that interconnections?
And if meter is remotely placed, what size and type of cables should be used for the run from CT chamber to the meter, how cables should be protected, should cables be double insulated?
Is that numbering on the cables industry standard or another identification of cables can be used as long as it clearly understandable?
Your videos are really helpful.
It's 2.5mm heat resistant cable , in remote panels and through apertures DNO's use SWA to protect the wiring. The identification ferrells are usually standard use across the board but I have seen them marked previously with biro or sharpie etc .
@@MarksElectricMeterExchanges Thank you for answering. I've got some more questions on that CT metering, but wait for new video from you.