My xk123 I put together new fuselage, 1 new servo, new tail motor, new gear n calibrated xk6 n the xk123, but it seems great spoiling up , but won’t take off?? Could u help?
At 16::45 you are starting to set the pitch angle to 0°, right? At 19:40 it shows 0° pitch at 65% throttle, if I understood it right. Shouldnt it be 0° pitch at 50% throttle? Wouldnt be positive and negative pitch beeing equal if 0° is at 50% throttle? What is the purpose of 0° pitch at 65% throttle? Second Question. Why do you need -39 sub trim for zero pitch and then you need -20 sub trim for zero pitch? Thank you.
Hello Silberner Surfer. I'm not good at English. I am sorry if I understand your question is wrong. As for the first question, the numerical value of the throttle curve is displayed on the liquid crystal screen of this transmitter. At this time, T. Curve and P. Curve had the following settings. T. Curve 00 45 65 80 100 P. Curve 40 45 50 60 70 Therefore, when P. Curve was 50, 65 of T. Curve was displayed on the liquid crystal screen. As for the second question, I adjusted the amount that I could not adjust with the linkage rod with a sub trim. -39 Since the stick was off the center at the sub trim, I corrected the stick and finally adjusted the sub trim to -20 and adjusted it to zero pitch. thank you for your comment:) I will do the next video better, so thank you. (Using Google translation)
☠BLACK BARON☠Anyone knows how to get rid of the tail problem after a crash? The heli always turns nose left after takeoff. Any iDeas anyone? I already tested out all parts, is it the transmitter?
@@moto3591 Thanks for your help! Unfortunately the 2.5mm leveller is out of stock. Doesnt matter. I have found a leveller at microheli.com. Your vids are great! I have posted the one about adjustment of the K110 on RCgroups. Unfortunately I cant read asian signs. So I cant understand everything and dont know what you are doing sometimes. Maybe you can add more english subtitles at your K110/123/124 and V950 vids. They are great when it comes to adjustments and settings! This is the thread were I have posted one of your K110 vids. The admin liked the vid too, so he posted it on the first page as a example for how to do the settings and adjustments. www.rcgroups.com/forums/showthread.php?2495865-XK-K110-3G-6G-Small-CP-Heli-thread-same-or-better-than-V977-%28Work-in-Progress%29/page349
Hello danial Tun. It's a video of outdoor flying, although I can not let it fairly well. Thank you. ↓XK K123 Outdoor flight ruclips.net/video/CkQz4NA0mcE/видео.html
@@moto3591 TQ.MR.are you vol.4 is heli fly aerobatic only may i want to know transmitter how to do aerobatic .I have xk123.two heli i trying can not fly aerobatic.
@@danialtun5431 Hello. I could not understand well because I am not good at English. Is the question setting of the transmitter or operating method of the transmitter or anything else? Thank you. (Translated by Google translation)
One of the best XK heli @ no doubt. It should continue manufacturing this product 😂. 👍
My XK k123 is spinning on its own axis after a 30cm drop. Any tips on what it could be and how to fix it?
Were you swapping out for Cnc parts or just lubricating?
Muito bom!!! Uma excelente aula de manutenção.
Yes I saw it 😂 again my rc helicopter. Even I don't have it.
Where you buy all the tools for repair this helicopter ?
What a well made lil guy I like the 124 may get one
My xk123 won’t take off anymore? Suggestions ? Battery seems fine all seems fine but won’t create any lift ? Thx
My xk123 I put together new fuselage, 1 new servo, new tail motor, new gear n calibrated xk6 n the xk123, but it seems great spoiling up , but won’t take off?? Could u help?
At 16::45 you are starting to set the pitch angle to 0°, right? At 19:40 it shows 0° pitch at 65% throttle, if I understood it right. Shouldnt it be 0° pitch at 50% throttle? Wouldnt be positive and negative pitch beeing equal if 0° is at 50% throttle? What is the purpose of 0° pitch at 65% throttle? Second Question. Why do you need -39 sub trim for zero pitch and then you need -20 sub trim for zero pitch? Thank you.
Hello Silberner Surfer.
I'm not good at English.
I am sorry if I understand your question is wrong.
As for the first question, the numerical value of the throttle curve is displayed on the liquid crystal screen of this transmitter.
At this time, T. Curve and P. Curve had the following settings.
T. Curve 00 45 65 80 100
P. Curve 40 45 50 60 70
Therefore, when P. Curve was 50, 65 of T. Curve was displayed on the liquid crystal screen.
As for the second question, I adjusted the amount that I could not adjust with the linkage rod with a sub trim.
-39 Since the stick was off the center at the sub trim, I corrected the stick and finally adjusted the sub trim to -20 and adjusted it to zero pitch.
thank you for your comment:)
I will do the next video better, so thank you.
(Using Google translation)
@@moto3591 That was exactly what I have asked for! Thanks a lot for your explenation!
Your vids are pretty good! Thanks for posting them on YT! :-)
Character In the video It's great, I like it a lot $$
Where you buy swashplate level tool ?
スピンドルシャフトを締める為の6角ナットはなんmmですか。？
こんにちは、6角ナットは2.5mmの工具で締付け可能ですよ。
ありがとうございます。私は全く緩まかったです。今度は温めて見ます。
I love you my friend
MUITO MUITO BOM, OBRIGADO.
How to fly aerobatic please tech me.
how did you do it can you share with me , thank you
☠BLACK BARON☠Anyone knows how to get rid of the tail problem after a crash? The heli always turns nose left after takeoff. Any iDeas anyone? I already tested out all parts, is it the transmitter?
May you tell me where to get the blue swashplate leveler, please?
@@moto3591 Thanks for your help! Unfortunately the 2.5mm leveller is out of stock. Doesnt matter. I have found a leveller at microheli.com.
Your vids are great! I have posted the one about adjustment of the K110 on RCgroups.
Unfortunately I cant read asian signs. So I cant understand everything and dont know what you are doing sometimes. Maybe you can add more english subtitles at your K110/123/124 and V950 vids. They are great when it comes to adjustments and settings!
This is the thread were I have posted one of your K110 vids. The admin liked the vid too, so he posted it on the first page as a example for how to do the settings and adjustments.
www.rcgroups.com/forums/showthread.php?2495865-XK-K110-3G-6G-Small-CP-Heli-thread-same-or-better-than-V977-%28Work-in-Progress%29/page349
おーいいですね！
Mr moto3591,What is the purpose of the sub-trim?
Hello Frank Ma.
We adjusted the pitch angle of rotor blade to 0 ° using sub trim.
Adjusted with linkage rod adjustment and sub trim 6 CH.
Thank you.
Thank you very much
Où acheter l'outil Swashplate Leveling ?
TQ.yesterday and i saw this viedeo unbalance my xkk123.can i repair ready .can you please show me aerobatic how to fly transmeter video pls.TQ
Hello danial Tun.
It's a video of outdoor flying, although I can not let it fairly well.
Thank you.
↓XK K123 Outdoor flight
ruclips.net/video/CkQz4NA0mcE/видео.html
@@moto3591 TQ.MR.are you vol.4 is heli fly aerobatic only may i want to know transmitter how to do aerobatic .I have xk123.two heli i trying can not fly aerobatic.
@@danialtun5431
Hello.
I could not understand well because I am not good at English.
Is the question setting of the transmitter or operating method of the transmitter or anything else?
Thank you.
(Translated by Google translation)
@@moto3591 TQ writing back to me.may i want to know transmitter how to do fly aerobatic video.TQ.Mr.
@@danialtun5431 Hello.
I made a video using a flight simulator.
Thank you.
↓ HELI-X 7 (Flight simulator)
ruclips.net/video/LfvdBrd_4i0/видео.html
XK K123 Transmitter setting
・T.Curve 76 70 60 70 76
・P.Curve 24 40 50 60 76
・D/R Small 1：29 2：40 4：70
Big 1：68 2：80 4：70
・EXP 1：-20 2：-32 4：-25
以外と大きいなぁ
how did you do it can you share with me , thank you