This TIE fighter is clearly inspired by jerec's designs, so I imagine that even though the model was not designed by him, it looks like it will still fit with all of the other TIE fighters in your webstore.
"Design from Lightsaber Productions." WHOA, WHOA, WHOA, a TIE that WASN'T designed by Jerac?! I was so sure it was when I saw the wing and cockpit design! Color me impressed, well done! :)
Just realized this build totally has a second cockpit for the secondary crew member! Was looking over the instructions. That was totally missed in the video. Great job, Lightsaber Studios!
My BrickVault wishlist is: Resistance X-Wings, Cavegod’s Kylo Ren Command Shuttle, Tie Silencer, AT-ST, Resistance A-Wings (Thomas Jenkins), and the Phantom II. Wish that will probably never happen: The Twilight from Clone Wars in Minifig scale.
Just some fun science nerd facts: the mobility of the wings going up and down actually makes a lot of sense. The lower the edge of the wings are relative to the center of mass, the more agile and maneuverable it becomes. Conversely, the higher they are, the more 'stable' and less wild the banks will be.
Need this! Just bought the instructions for the Tie Collection and just finished ordering and building the Tie Fighter. Can't wait to get all those Tie's done and then get this one! I need this one in my fleet.
If you're wondering why the wings are able to articulate its for a couple reasons the first reason even though it might be accidental is for storage space with the wings up there's more room under the striker and the second reason is lift when the wings are up it creates more lift causing it to take off much faster
@@jamescerio6406 1 st or second don t really matter . in fact i m waiting the phantom before buying the instruction for the ghost ! but don t worry take your time we just whant you to do it one day or another no problemes ! good day from the north !
If this did get added to Battlefront 2 I know excactly what the abilities would be. Middle: Wing Angle Adjustment - The model would change with the wings angling up like in the video. The Striker can turn quicker and has an increases speed for a little bit, but not as fast as the afterburner ability. The TIE Striker was capable of adjusting its wings mid flight. Ability length: 10 sec Right Ability: Dual Proton Torpedoes. The Striker could also act as a bomber with the co-pilot acting as a bombardier. Left Ability: Secondary Laser Fire - The two laser cannons on the wings of the Striker are activated, firing all four cannons in a synchronised manner, with the two on the main body firing then the two on the wings fire, the ability causes high damage. Ability time: 10 to 15 sec What do you think?
Hey there, to complete the republic ships a little more, you should add the nu-class attack shuttle. The original lego model although is about 10 years old, so a minifig scale shuttle would be awesome.
And it´s in the shown model, aswell as in the instructions. So don´t worry to purchase a TIE-Striker missing that detail ;D P.S.: Thanks for spending so much time to find that inbetween all my flickr shots ;D
Well, that just about covers every single Tie Fighter ever made in the Star Wars Universe! But there was another Lego set years ago about a unique Tie craft, it was a terrestrial vehicle, like a Tie Tank, it had threads and moved on the ground, I think they made it 2005 or something. Cool new Tie Striker!
Yes, there is a bombardier cockpit on the back of the Striker. And you actually can fit the pilot through the hatch! It´s fully equipted with details on the sides and on the front, aswell as a targeting computer. It almost looks like on the flickr shot in the final model.
Looks really nice, but I don't understand why he placed the gear function behind the cockpit, where the hatch is (removing space from the cockpit and making it less accessible) rather than using all the space behind where the cargo is supposed to be?
I calculated that a minifig sized star destroyer would be 36 meters long, a minifig sized super star destroyer would be 434 meters long and the supremacy would be 1.302 meters long.
Well shoot, I guess it's only a matter of time before we get a TIE Droid! I would say TIE Hunter, which I think is pretty awesome, but you're talking a folding wing connection point as small if not smaller than the recent V-Wing. I just don't think such a feat is possible with LEGO pieces and maintain visual accuracy.
LightsaberProductions Awesome thanks! It only showed up in Star Wars Rebels and I know Star Wars Rebels didn’t use the correct sizing for the Tie Fighter so hopefully converting it to the right size will be easy!!
How a bout a TIE Reaper, the ship we see flanked by three TIE Strikers in the opening shot of this very Video? With it, you would have all playable ships from Star Wars Squadrons in your Store
I have them ;D You could get them by LEGO or bricklink for example I also made sure not to use too many rare pieces, so most of them should be rather easy to get Thank you for your kind words
It’s got a pretty awesome design? With all that wing area ahead of the cockpit how the hell would a pilot see more than a few degrees directly in front of themselves? It’s a vehicle designed to look cool but is actually hugely impractical. I mean the original TIE fighter has a similar problem but the nidiots who designed this have just taken it to the extreme!
Same with the Millenium Falcon cockpit. There´s no worse place to set up a cockpit. Somehow Star Wars engineer just take care of the design, not the functionality ;D
LightsaberProductions I’d call it well implemented inspiration. This isn’t a build Jerac has made, and I’m sure he’s happy to see his technique put to good use! I hope Jerac is working on the Resistance X-Wings and Lightsaber studios will tackle the Tie Silencer (since they’ve mastered those fricking long solar panel wings.)
@@jamescerio6406 A resistance X-wing would be awesome, especially after we saw a them dropping out of lightspeed in the lates Rise of Skywalker Trailer. That looked sick.
@@lightsaberproductions8592 Hi, I think this design is amazing! But one big difference with Jerac's designs that stands out to me is that there are more color variations (the dark bluish gray), which makes it look more like a LEGO set. So I would like to change that to make it fit in with Jerac's designs, but that's just my opinion.
I´m glad to hear you like my TIE Striker and try to giving it your individual touch :D And I do understand what you mean, just realized that Jeracs TIE fighters are all in light bluish gray. P.S.: The main references I´ve used to design this MOC were the movie, and the Rogue One Ultimate Visual Guide´s crosssection, where some colors seemed darker than light bluish gray Plus some section just did not look right to me in light bluish gray. Just that you know why if decided to chose the colors that way.
![FORTNITE CLASSICS IS BACK! Fortnite Item Shop [November 15th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/RbQURbeFwqs/mqdefault.jpg)
This TIE fighter is clearly inspired by jerec's designs, so I imagine that even though the model was not designed by him, it looks like it will still fit with all of the other TIE fighters in your webstore.
Yes, it has the same visual touch Jeracs TIE-fighters have but is using totally different in-depth building techniques.
Build the Razorcrest from “The Mandalorian”!
"Design from Lightsaber Productions."
WHOA, WHOA, WHOA, a TIE that WASN'T designed by Jerac?! I was so sure it was when I saw the wing and cockpit design! Color me impressed, well done! :)
Thank you for you kind words ;D
@@lightsaberproductions8592 You're very welcome, you've earned it! Would be glad to see a couple more lesser-known TIE's from you.
@@JonathanAntillies0 Tell me what you want ;D. I´d love to give the Emperors Royal guard TIE interceptor a try, even if it´s just a legends ship.
LightsaberProductions You could do Baron Vonreg’s Tie Interceptor from Resistance. It would be very similar to the Royal Guard tie.
And how about a heavy tie, like the one from solo
Wow, the mechanism for the wings is just so well hidden, Lego should take notes ! :D I would love to see your guys design of an AT-AP walker.
Thanks a lot! Glad to here that. It took me a lot of time to hide that so well ;D
LightsaberProductions did you use a worm gear to prevent the wings from moving?
@@leanmeangreenbeanmachine3347 Only one way to find out ;D
P.S. Yes, i did
LightsaberProductions genius
@@leanmeangreenbeanmachine3347 Thanks!
Just realized this build totally has a second cockpit for the secondary crew member! Was looking over the instructions. That was totally missed in the video. Great job, Lightsaber Studios!
Wow, thank you so much. Hope you enjoyed the build.
I put a lot of effort into the instructions to make them easy to follow.
Please please please do some Jedi starfighters
This Will make a fine addition to my collection
I´m sure it will, General Grievous!
I am waiting for the Razorcrest custom design so much!
My BrickVault wishlist is: Resistance X-Wings, Cavegod’s Kylo Ren Command Shuttle, Tie Silencer, AT-ST, Resistance A-Wings (Thomas Jenkins), and the Phantom II. Wish that will probably never happen: The Twilight from Clone Wars in Minifig scale.
Awesome list! Twilight might be unlikely.... but it's about the same size as the Ghost if not smaller, so maybe :D
dpswets Yeah, The Twilight is far-fetched, but a man can dream!
I built a micro scale one of these, but this is obviously superior
Just some fun science nerd facts: the mobility of the wings going up and down actually makes a lot of sense. The lower the edge of the wings are relative to the center of mass, the more agile and maneuverable it becomes. Conversely, the higher they are, the more 'stable' and less wild the banks will be.
Hey brickvault, I was wondering if you’d ever consider making a minifig scale outrider/yt-2400
A Tie Reaper next please!!!!! 😊😂
My boy. WHERE IS MY TIE BRUTE!
How could I forget that ship??? Need it!!!
Could you guys make anakin's and obi wan kenobis jedi interceptor. Also a at st minifig scale
Exotic Space he said this before the made them you donkey
Need this! Just bought the instructions for the Tie Collection and just finished ordering and building the Tie Fighter. Can't wait to get all those Tie's done and then get this one! I need this one in my fleet.
Glad you like it!
I’d love to see you guys make the AAT or the HAV Juggernaut!
Jack Calde The AAT is on their site! It’s a beautiful model made by the talented Lewis Kiwi!
Sorry, I meant MTT. My mistake.
I loved the quick Stryker reference in the beginning there.
A very beloved TIE design is the TIE/D automated fighter. Would be cool to have minifig scale instructions for such a ship.
If you're wondering why the wings are able to articulate its for a couple reasons the first reason even though it might be accidental is for storage space with the wings up there's more room under the striker and the second reason is lift when the wings are up it creates more lift causing it to take off much faster
An LAAT/c MOC would be amazing. It's my favorite ship from Star Wars!!
It's being built atm, they mentioned it in the AT-TE video :)
@@dpswets I'm excited!
NINTH love the model and your vids of course🤗🤗🤗🤗🤗 3:31 THE TIE ARMY FOR THE EMPIREEE
i hope that the Phantom from rebels is in good progress ! continue guys wonderful job !
paul moignard I know, in one video it looked like the Phantom II was done.. but that was months ago!
@@jamescerio6406 1 st or second don t really matter . in fact i m waiting the phantom before buying the instruction for the ghost ! but don t worry take your time we just whant you to do it one day or another no problemes ! good day from the north !
I'm in the same boat... I'm waiting to get the instructions when all that is 100% complete.
If this did get added to Battlefront 2 I know excactly what the abilities would be.
Middle: Wing Angle Adjustment - The model would change with the wings angling up like in the video. The Striker can turn quicker and has an increases speed for a little bit, but not as fast as the afterburner ability. The TIE Striker was capable of adjusting its wings mid flight. Ability length: 10 sec
Right Ability: Dual Proton Torpedoes. The Striker could also act as a bomber with the co-pilot acting as a bombardier.
Left Ability: Secondary Laser Fire - The two laser cannons on the wings of the Striker are activated, firing all four cannons in a synchronised manner, with the two on the main body firing then the two on the wings fire, the ability causes high damage. Ability time: 10 to 15 sec
What do you think?
Hey there, to complete the republic ships a little more, you should add the nu-class attack shuttle. The original lego model although is about 10 years old, so a minifig scale shuttle would be awesome.
I love it! I think you guys should try to do some real life space stuff, like the space shuttle, or the soyuz rocket!
Thank you! Glad to hear you love it!
You should make bark speeders or the turbo tank/ juggernurt
Why didn’t you guys show the bombardier cockpit?
It is on lightsaber production’s flickr
And it´s in the shown model, aswell as in the instructions. So don´t worry to purchase a TIE-Striker missing that detail ;D
P.S.: Thanks for spending so much time to find that inbetween all my flickr shots ;D
What about a resistance X wing
You should do a tie reaper
Please do a tie reaper by jerac! The tie reaper is my favourite imperial ship.
Now wheres the TIE Reaper? WE NEED A DROPSHIP!
There was an other tie fighter in rogue one, it is like a shuttle but with the tie striker wings are you going to do a model for it?
It´s called the TIE-Reaper. And it´s almost double the size of a TIE-Striker. That might be bit to huge. But for sure it would look super cool.
After yavin you guys should make a scarif moc
That would be awesome, but then we gonna need a TIE Reaper.
@@lightsaberproductions8592 Plz make one! That would be EPIC!!!
1:14 Is it just me or does he sound like Kermit the frog
BRUH
Now do a tie reaper 😀
Well, that just about covers every single Tie Fighter ever made in the Star Wars Universe! But there was another Lego set years ago about a unique Tie craft, it was a terrestrial vehicle, like a Tie Tank, it had threads and moved on the ground, I think they made it 2005 or something. Cool new Tie Striker!
The Tie Crawler
Really cool except there is supposed to be a second cockpit for a bomb aimer in the back, along with some bombs in the middle.
How about a escaepod with the broid pod hutter from the clone wars mlevsint arc
May the force be with you
Sooooo can I take credit for mentioning this build on an older video? Really excited to build this!
Have fun!
An amazing moc and that stand just makes it even better 😀👍
Thanks!
@@lightsaberproductions8592 no problem?
@@InfernalBricks-Master-Jedi ?
@@lightsaberproductions8592 oh right, no problem your moc is a master piece
@@InfernalBricks-Master-Jedi Wow, such compliments are a pleasure to read.
i really like the new intro song
Does the copilot fit in the back on the final model? Looks like Lightsaber Productions tried to make one in his Flickr photos...
Yes, there is a bombardier cockpit on the back of the Striker. And you actually can fit the pilot through the hatch! It´s fully equipted with details on the sides and on the front, aswell as a targeting computer.
It almost looks like on the flickr shot in the final model.
Sweet that’s awesome! Thanks
Should totally do a custom actis class light interceptor
I would love to see a UCS scale Ebon Hawk from KotOR :)
Looks really nice, but I don't understand why he placed the gear function behind the cockpit, where the hatch is (removing space from the cockpit and making it less accessible) rather than using all the space behind where the cargo is supposed to be?
I calculated that a minifig sized star destroyer would be 36 meters long, a minifig sized super star destroyer would be 434 meters long and the supremacy would be 1.302 meters long.
I'm actually really surprised you guys havent made a Krennic's shuttle in minifig scale yet
That would be really huge, but would look awesome.
We need a mini figure scale AT-ST
Curiously, would the new at-at's screw driver work for the wing's mechanisms?
All we need now is the time reaper and the time brute
Never noticed Tie Striker in battlefront, they've must have added it in long after the scarrif update.
now we need the tie reaper 😉
That looks dope
Thank you!
I'd love to see Poe's X wing
Well shoot, I guess it's only a matter of time before we get a TIE Droid!
I would say TIE Hunter, which I think is pretty awesome, but you're talking a folding wing connection point as small if not smaller than the recent V-Wing. I just don't think such a feat is possible with LEGO pieces and maintain visual accuracy.
Could be possible, as the Wings are really small, but for sure it would be a challenge to build!
Make a CR90 Corvette to minifig scale
Or something cheap like a speaker that we could buy in bulk😁
PLEASE make a VT-49 Decimator
Please make a minifig scale Kylo Rens tie silencer and compare it to Darth Vader’s minifig scale Tie interceptor 🙏
Uh, I’ve been waiting for this one for a while. But I didn’t see the back cockpit, is that on the model. Anyways, can you please do a TIE Reaper next
That's nice.
Thank you!
When yoy actually make a new model, you should use new bricks, old bricks are a little bit unconectable or strong unlike new ones
@LightsaberProductions Do you have plans on making the Inquisitor's Tie?
Not yet, but I´ll put it on my list ;D
LightsaberProductions Awesome thanks! It only showed up in Star Wars Rebels and I know Star Wars Rebels didn’t use the correct sizing for the Tie Fighter so hopefully converting it to the right size will be easy!!
The wings aren’t supposed to be that low, it’s only a few degrees lower than straight across
Omg thank you so much.
No problem ;D
How a bout a TIE Reaper, the ship we see flanked by three TIE Strikers in the opening shot of this very Video? With it, you would have all playable ships from Star Wars Squadrons in your Store
Would be huge, but really cool
Awesome
Thanks!
And what about a republic y-wing
are the peices shown befor you bye so you can get all the peices ready
Well, I think we know what the next moc should be...
The Clone Turbo tank
Wow, that would be huge, even bigger than the Sand crawler.
Looks like we need a very ambitious builder here...........
Will you do jabbas sail barge
Jedi starfighters both types
This needs a Tie Reaper to escort
That’s awesome.
Just like you are!
LightsaberProductions Thanks! that compliment just lit up my day
How about an at st
Are the custom builds built with legitimate lego?
Yes
Hello!
A tie not made by Jerac? Wow.
Thanks!
Yes
Wow
Thank you!
Resistance x wing
Please do more walkers, like
FO at-at (recoloured at-at)
At-st
FO at-st
At-ap
At-dp
(Dare I say it) FO AT-M6 or FO AT-HH and battering ram cannon
Check my FO AT-ST and AT-M6 :) and more First Order MOCs
to be honest i prefer the set version idk the moc kind lacks details and doesnt have the trademark lego look of things
Anyone else think this was a Minecraft aid before for reading the title
Who in there right mind disliked the video? Shame on you! Lol
Wow, thank you! Seems like you enjoyed it.
Do the tie reaper
I guess I can assume you liked the Striker design, as they are quit similiar.
The TIE Reaper would be really huge, but super cool.
Are you planning on following this up with a TIE Reaper moc? 🤞🤞
Is there anyone who has da pieces for dis masterpiece
I have them ;D
You could get them by LEGO or bricklink for example
I also made sure not to use too many rare pieces, so most of them should be rather easy to get
Thank you for your kind words
Halo 2 pelican
It’s got a pretty awesome design? With all that wing area ahead of the cockpit how the hell would a pilot see more than a few degrees directly in front of themselves? It’s a vehicle designed to look cool but is actually hugely impractical. I mean the original TIE fighter has a similar problem but the nidiots who designed this have just taken it to the extreme!
Same with the Millenium Falcon cockpit. There´s no worse place to set up a cockpit. Somehow Star Wars engineer just take care of the design, not the functionality ;D
kono dio da
❤😊😘😍😍🥰
🤯🤯🤯🤯
😍😍🥰❤😊😘
Первый нах В)
A bit of a rip off of Jerac's TIEs
It definetly is, because his design is just so on point.
LightsaberProductions I’d call it well implemented inspiration. This isn’t a build Jerac has made, and I’m sure he’s happy to see his technique put to good use! I hope Jerac is working on the Resistance X-Wings and Lightsaber studios will tackle the Tie Silencer (since they’ve mastered those fricking long solar panel wings.)
@@jamescerio6406 A resistance X-wing would be awesome, especially after we saw a them dropping out of lightspeed in the lates Rise of Skywalker Trailer. That looked sick.
@@lightsaberproductions8592 Hi, I think this design is amazing! But one big difference with Jerac's designs that stands out to me is that there are more color variations (the dark bluish gray), which makes it look more like a LEGO set. So I would like to change that to make it fit in with Jerac's designs, but that's just my opinion.
I´m glad to hear you like my TIE Striker and try to giving it your individual touch :D And I do understand what you mean, just realized that Jeracs TIE fighters are all in light bluish gray.
P.S.: The main references I´ve used to design this MOC were the movie, and the Rogue One Ultimate Visual Guide´s crosssection, where some colors seemed darker than light bluish gray
Plus some section just did not look right to me in light bluish gray.
Just that you know why if decided to chose the colors that way.
2. Comment🥵
You lucky one. One of the first to see that beatiful ship ;D
Wow