Home Flex gas fittings ( quick tips )

Quick how to /tips on Home Flex brand gas line and fittings. These are DIY friendly just read instructions and take your time
don't forget to SUBSCRIBE thnx
new home flex female adaptor amzn.to/3bV0Jis
new home flex male adaptor amzn.to/3rjffoW
new home flex termination flange amzn.to/3qyKnQP
new home flex tubing amzn.to/3is6pSt
new pipe cutter amzn.to/3c5ZsoW
*Support this Channel @*buy me a beer*-www.buymeacoffee.com/danshaffneX
*GTTP merch- www.teepublic.com/t-shirt/213...

[@dudestoneking]

"your watchin this cuz you didn't want to read the directions..." True and hilarious! XD

[@edwardierd09]

Hey I read the directions AND came here for some quick tips

[@elpete77]

This should have way more views. I'm telling all my friends about it. Got to the point, showed what I needed. Thanks, my man.

[@GetToThePointplz123]

Thnx man, stay safe brother

[@iziklorenzo9189]

Super helpful, appreciate the video. Love how you start, "for those who don't wanna read the directions". 👌

[@aloofbit338]

ty!! i read directions but i think i needed someone to show and explain simply to be most comfrotable

[@MrSeanXavr]

Thanks, brother. Appreciate the real life feedback. Always helpful seeing how products perform in the field.

[@sonomaremodel]

thank you for your clear and concise instructions.

[@hansmorales101]

Exactly what I was looking for
Thank you so Much!!

[@GetToThePointplz123]

👍

[@Timothy-NH]

I found this video because I was wondering if I could do this myself, and if I needed any special tools. This looks pretty easy, and no special tools needed. Off to the hardware store I go!

[@rexolrexol7893]

I found pro flex is a better connection but any way I used this type of fitting and maybe over tightened it I used a solution to check for leaks but it was dark and hard to apply so i bought a batter powered leak detector cost 25 dollars and checked my fitiing and found some very small leaks I got rid of this fitting and used a proflex found at lowes It is better

[@westhavenor9513]

Very helpful! Thank you.

[@cryptoplumber1]

Pretty good. I would check for leaks first before securing the flange to the floor.

[@kellonpitts2650]

Thanks for the great informative video.

[@edbtzkhud]

Excellent video!

[@geneinmyrtlebeach6967]

Fantastic job brother! No BS and straight to the point. Every how-to vid on the 'net should be this way. Many thanks.

[@jerryleejohnsonjr1377]

excellent video! thanks

[@stevenbruce2659]

Thanks, very helpful.

[@marleniaobin6061]

Thank you!

[@BobBob-nr1zt]

I suppose you might want to check the back side of the fitting for leaks before fastening the fitting down with screws. Natural gas is super low-pressure, so it's pretty easy to get a leak-free connection. Code may not allow passing a flexible gas pipe through a wall/floor...

[@mixedberries4937]

Thanks

[@merlynmyrdryn5524]

So it looks fairly simple

[@merlynmyrdryn5524]

I'm actually watching it to see if I want to use it instead of hard pipe

[@ifonlyiwashomer]

Great video

[@GetToThePointplz123]

Awesome 👍

[@tycoonz0619]

Thumbs up

[@kdeltatube]

#6 copper ground?

[@jeffstreet7763]

Decent video. The only problem is the pro flex instructions say to place the retainer ring into the fourth valley of the CSST.

[@GetToThePointplz123]

This video is for "Home Flex " not "pro flex" ...pro flex probably has different instructions that I'm not familiar with

[@rexolrexol7893]

I thought the same thing

[@peterborgesen3349]

Shows how to make the connections fine, but this is misleading for many people as you left out a code required drip leg.

[@ezdinero9813]

What if you connect it and u need to disconnect it for some reason will the ring be no good or is it still good

[@GetToThePointplz123]

Should be able to disconnect and reconnect without problems, all ways check for leaks after

[@andydouglass1374]

The manual says that the gasket cannot be reused but a new gasket can be installed on the fitting. Problem is, the manual has no instructions for replacing the gasket and it seems like the gasket is bonded to the fitting somehow.

[@therojas9224]

No good

[@jlow4214]

What about a “dirt leg”?

[@calebfifelski5573]

You don't need a dirt leg or drip leg for a cook stove. You do need them on a Furnace, boiler and water heaters.

[@maestrovso]

I bought these CSST stuff from Home Depot. I didn't want to buy the pipe cutter just to use it once, nor I want a free "rental". I figure I can cut the tubing with other means carefully. Indoor gas or propane pressure is very low, so I can see how these stuff work. Black pipes and fittings are pricing themselves out of the business with their ripoff prices these days. Gas plumbing is so stone age and I can never understand in my jurisdiction copper pipes are not allowed, and they force us to use black pipes which is so overkilled.
This stuff is far superior than the dinosaur black pipes and cast fittings from CCP China.

[@b33moua]

What did you end up using to cut this?

[@maestrovso]

@@b33moua I cut it with a dremel tool with a mini cutting disc. Very easy to do.

[@nsudatta-roy8154]

Don't know if anyone has mentioned this, but DO NOT use soapy water on CSST to test for leaks. The detergent may cause a premature failure as it may be corrosive.