I was told by a old timer to charge the magnet on the mag. He sed it makes a big difference in the charge. Any time u pull the magnet or Armature out it can lose magnesium he sed to always do them as a whole unit when you can. He use to work on these 80 years ago
Good job guys. I made one years ago for the mag off an oilpull tractor. it was pretty much the same as yours.I charged the magnets enough that I used it for years before they needed recharging again.
Im no expert but this is my understanding. The magnetic field lines induce a current in the coils by pushing/pulling the electrons in the wires. Magnetizer is basically the opposite, using field created around the coils with electricity the rearrange/polarize the electrons in the rotor.
I’ve made one that I will make a public video for by spring . It costs less than $20 and takes less than 1 min to build . It will charge the magnet to almost dbl the Tesla these were charged to from the factory .
actually a bigger battery wouldnt change much. The current I= 12V/R where R is proportional to the length of the wire windings. That battery is plenty. Probably should add a capacitor to that system.
How did you wire the N & S Poles together? Can you send me a Chart of how its wired? Im kinda tired of the Over priced Magneto guys charging me to charge a Magnet on my Tractors or Engine Magnetos.
I could be being silly but I am sure than magnets come off charged at opposite poles to the electric field. So you need to place your magnet at opposite poles, not like poles. I could be wrong but I don't think I am, I believe that's why it appeared as if it didn't work
That is what he did. Did you see when he suspended the magnet above the charger poles with the string? The North pole of the suspended magnet seeks the South pole of the charger, and vice versa. North to South, and South to North.
Dear 805ROADKING I like the simplicity because I'm not technically minded the music wasn't bad but i would have used Sound tracks by Soft Cell or Kraftwork ;) on a serious note can you look at Michael Chapala on you tube under Morgellons he claims to have built a magnetic pulser machine that will take these nano fibres from my skin , I have Morgellons I'm not going to go into detail because I begin to start sounding crazy so I need to know if you can make one of his machines I can't afford the money hes asking & I'm intrigued to know exactly how it works thank you for your time. God bless
just a little tip here ... do not put the magnet on a piece of iron directly after "recharging" it. You'll loose a tad of the re-formatted magnetism. But excellent job anyway !!! Thanks for this excellent idea and vid!
brian hilligoss please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William
Stef Van Diepen please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William
Just wondering if you have ever tried replacing the horseshoe magnet with a neodymium magnets to see if it makes a hotter spark? Or does the magneto rely on having the curved metal shape in there?
Jon Fisher please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William
We didn't make any videos of building that thing but it is wired up just like the electro magnets everybody makes in grade school just a whole lot bigger!!☺
please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance William
its not the mather how strong the magnetism is its a mather that you can and are abel to magnetise any thing out of steal and other metas the use of it is by creation of a multi pole piece of diferent shapes used mainly for ac generators ore motors ore dc motor/generator just like the good old magneto power out of any thing simply that can spin thats what peopel are after the free rate of spining objects that are normaly not used at all so any cinde of movement can by turned from wasted to usabel work simply and logicaly and that "any thing" you want only by that litel info is enough reason to use that old tehnology!!!
I was told by a old timer to charge the magnet on the mag. He sed it makes a big difference in the charge. Any time u pull the magnet or Armature out it can lose magnesium he sed to always do them as a whole unit when you can. He use to work on these 80 years ago
Seems like that would be a good experiment/video. Magnets on vs off
This is a tool that should just be passed around form shop to shop. Its rarely ever used but when its needed its really needed.
That is a strong electromagnet! Every time you energized it my hair stood on edge clear over here in SW Minnesota!
Lol!! Now that's Strong!!☺
Good job guys. I made one years ago for the mag off an oilpull tractor. it was pretty much the same as yours.I charged the magnets enough that I used it for years before they needed recharging again.
+wayneriedlinger Thanks Bud!!☺
صديقي هل تستطيع ان تشرح لي بفديو كيفية صنع هذه الالة لاني احتاجها فعلا
I just love this pair, don't know exactly why but I do.
Such a simple little rig .. But it sure makes a big diff in the magnets strength !!
Yeah if copper wasn't so expensive we would have built one years ago!!☺
Fantastic video guys.
Can you make a vid illustrating how you made it?
Interesting video, Mike is a smart guy.
Yeah he's pretty Sharp!!☺
I know electricity makes magnetism, and magnetism makes electricity. I don't know why, but this is a great demonstration of it! Liked a lot:)
It's like being back in grade school making little electro magnets eh!!☺
Im no expert but this is my understanding. The magnetic field lines induce a current in the coils by pushing/pulling the electrons in the wires. Magnetizer is basically the opposite, using field created around the coils with electricity the rearrange/polarize the electrons in the rotor.
I’ve made one that I will make a public video for by spring .
It costs less than $20 and takes less than 1 min to build .
It will charge the magnet to almost dbl the Tesla these were charged to from the factory .
That was some cool stuff to see !!!
Yeah Buddy!!☺
Cool vid... that Mike is a sharp fellow!
Yeah Buddy!!☺
You guys always have something interesting going on!
Yeah we try to stay busy!!☺
actually a bigger battery wouldnt change much. The current I= 12V/R where R is proportional to the length of the wire windings. That battery is plenty. Probably should add a capacitor to that system.
Hey Man, very good job...... how is the coils specs?
so this is where the x-men's arch nemesis magneto gains his power ?
damn you mike , wolverines coming for you
that things going to pull a satillitte out of orbit,,
We gotta be careful around pacemakers, That thing will rip it right outta ya chest!!☺
+805ROADKING pmsl just see it now lol
Can you make a video on how you made this magnetizer. Thank you
You can use a portable welding machine to power up at higher amps
How did you wire the N & S Poles together? Can you send me a Chart of how its wired? Im kinda tired of the Over priced Magneto guys charging me to charge a Magnet on my Tractors or Engine Magnetos.
I want to build one just to test if I have any alien implants inside my body.
How many turns on each coil? Do you remember?
leave it up to mike and his maddd inventions
Yeah ya never know what your gonna see eh!!☺
Great video I like your set up
I could be being silly but I am sure than magnets come off charged at opposite poles to the electric field. So you need to place your magnet at opposite poles, not like poles. I could be wrong but I don't think I am, I believe that's why it appeared as if it didn't work
That is what he did. Did you see when he suspended the magnet above the charger poles with the string? The North pole of the suspended magnet seeks the South pole of the charger, and vice versa. North to South, and South to North.
I seen it, I seen it, I seen the light, lol cheers guys
I'm glad someone seen it!!☺
Your demonstration is clear and real but how can I get my own cherger
Cool to see the result of the windings video! :) Jack
He's winding a coil for the Bessemer he's working on now!! I think he said it has 60K turns, aye yi yi!!☺
That's really cool.
Yeah we should have made one years ago!!☺
Good stuff.
Thanks Mate!!☺
Do you have a parts list and direction to share?
Why doesn't anyone show how to wire up the magnets to achieve the desired polarity ?
That's a big magnet zapper. I have a little tiny one to zap rc car motor magnets. I use a brass hammer to tap them.
That's cool!!☺
Thanks for sharing this.
Where'd you guys get that magnet clamp at the end there?
Dear i am interested and making megnet can you help me making how to megnet charge maker
alright thanks
do you think it is possible for me to make a 4 cylinder engine for my lifted lawn mower with a vertical shaft
thanks
That's a pretty useful gadget
Yeah we'll get alotta use outta it!!☺
see how much stronger a neodymium magnet would get
هل يمكننا صهر قطع النيوديميوم وصنع قطعه كبيره
neat stuff right there
Yeah Buddy!!☺
Looks good buddy :)
Thanks Mate!!☺
and now all your guys credit cards don't work . lol
Lol!! I didn't even think of that!! Luckily we didn't have any with us eh!!☺
Dear 805ROADKING I like the simplicity because I'm not technically minded the music wasn't bad but i would have used Sound tracks by Soft Cell or Kraftwork ;) on a serious note can you look at Michael Chapala on you tube under Morgellons he claims to have built a magnetic pulser machine that will take these nano fibres from my skin , I have Morgellons I'm not going to go into detail because I begin to start sounding crazy so I need to know if you can make one of his machines I can't afford the money hes asking & I'm intrigued to know exactly how it works thank you for your time. God bless
Now we all have single wall nanu tubes
Ahhhhhh forget about it.
I saw something…But the government said it was "Swamp Gas"
As long as it wasn't Swamp Ass you saw we're OK!!☺
just a little tip here ... do not put the magnet on a piece of iron directly after "recharging" it.
You'll loose a tad of the re-formatted magnetism.
But excellent job anyway !!! Thanks for this excellent idea and vid!
does this thing produce permanent magnets?
Nice work...how are the cables connected,its hard to se on the backside..
On the charger they are soldered to the post under the windings and at the battery they are just held in place by hand when charging!!☺
Good stuff,,,, watching in middle Tennessee ,,,
Start it up? :-)
Thanks Bud!!☺
Bro how to make a charger for neodymium magnets?
Instead of using a lawn mower battery, why not just plug it into the wall?
Nice!
If you heat that magnet real hot and than energise it til it has cooled down it will be much stronger, that's how super magnets are made
I don't think I'd want to experiment with a $400 Magneto!! I've never heard of anybody else do it like that!!☺
Super mags come out of the earth that way. Hence the name rare earth. Heat kills them.
brian hilligoss please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance
William
Stef Van Diepen please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance
William
Bill King research kundalini awakening symptoms
we have a BIG one of these I think it must weigh 100lbs or better my grandpa made it and it really works well
Yeah this one is pretty hefty too, not quite 100lbs though!!☺
copper is heavy when wound that tight lol.
is it going to work if you heat it while CHARGING it ??
Just wondering if you have ever tried replacing the horseshoe magnet with a neodymium magnets to see if it makes a hotter spark?
Or does the magneto rely on having the curved metal shape in there?
I've tried it unsuccessfully but I think I must have been doing something wrong because I've seen it done with the Maytags before!!☺
Make a video on how made super electronic magnet
How I made this machine
Turn the lights off to see the spark
lol I bet ya my boys would have alot of fun (aka trouble) with a few magnets.
Lol! Yeah they would love this one!!☺
...speed has to synchronize with the camera...
...right speed the camera will see all the sparks...
...change the speed and it won't see any...
That sure looks a lot cheaper then sending it out lol!
We get them done for free but we have to wait for an engine show!! This way we can do it when we want!!☺
What do you mean by sending it out? To a foundry to have it charged?
Are the coils in series? or parral? Are they both in the same phase?
Jon Fisher please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance
William
hey road king do you mind kind of showing or telling me how that is wired up and was made
thanks
We didn't make any videos of building that thing but it is wired up just like the electro magnets everybody makes in grade school just a whole lot bigger!!☺
How to make a permanent magnant charger
can you heat the item being magnetized and get better results besides tapping on the object being magnetized?
2:38
please watch Michael Chapala on you tube under Morgellons cure he has a machine called a magnetic pulser machine that will take these nano fibres from my body I can't go into detail because I begin to start sounding crazy so I need to know what that machine is he's using and how it would possibly work ? Thanks in advance
William
Put your tongue on it , you'll "see" it..
That'll work!!☺
its not the mather how strong the magnetism is its a mather that you can and are abel to magnetise any thing out of steal and other metas the use of it is by creation of a multi pole piece of diferent shapes used mainly for ac generators ore motors ore dc motor/generator just like the good old magneto power out of any thing simply that can spin thats what peopel are after the free rate of spining objects that are normaly not used at all so any cinde of movement can by turned from wasted to usabel work simply and logicaly and that "any thing" you want only by that litel info is enough reason to use that old tehnology!!!
Called the skin effect
Please let me know I need this
been looking at making one but the cost of wire is insane.
Yeah even if you can find them used they're still too expensive!!☺
805ROADKING
darn right. or too heavy to ship
Scematic sir......
Nice